Ceiling Projector Brackets: Ceiling Mount And Install Your Multimedia Video Projector

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Each user decides for himself where it is best to place the projector. While some people place equipment on separate tables, others choose reliable ceiling mounts for this. We will talk about them in this article.

Views

To fix the projector of absolutely any model, you must select the highest quality and reliable holders . These requirements can be met by modern ceiling brackets, presented in a wide range. Such devices require not only the right choice, but also installation.

There are different models of projector ceiling mounts . Each of the options has its own design features, which must be borne in mind when choosing a suitable copy.

Simple

Many large manufacturers complete the manufactured projectors with similar designs.

Simple brackets are usually telescopic and belong to the budget category. As a rule, these designs are developed specifically for a specific model of equipment, so they cannot be called universal.

Simple ceiling mount brackets do not have flawless and precise positioning. Due to the large number of disadvantages, many users prefer to abandon the holders that come with the equipment, preferring separately purchased devices of higher quality. If the owners nevertheless decide to install standard brackets, then they try to fix them at the smallest length of the bar.

Ceiling brackets standard version usually made from durable and strong metal. Products can be telescopic or square tube.

Crabs

Such an interesting name is one of the most popular clips for projector equipment. Also "crabs" are called "spiders". This name is due to the design of these brackets. Structurally, they are composed of the following components.

• Mounting heel . Thanks to this spare part, the entire structure is attached to the ceiling surface. In this case, dowels and anchors are used.
• Swivel joint . This spare part connects the "crab" and the heel. The built-in ball joint allows the projector body to be tilted. It is also possible to rotate it in the direction of the bracket axis.
• Capture node . This component kind of captures the hardware. It is this detail that is called "crab".

The main percentage of crab bindings have a heel and hinges of the same type. The difference between individual designs can only be in the device and the dimensions of the plate. The design of the "crab" is different.

Holders "crabs" are rightfully recognized as one of the most reliable. These are safe structures that, if properly installed, will serve for many years without problems and will not cause any trouble to the owners.

Elevator

Convenient modern video projector holders. Most often, such structures are mounted where there are suspended ceilings . Typically, the dimensional parameters of the elevator and the support base are no more than 1 cassette or section of a suspended ceiling structure. It is not difficult to mount such a composition, but only a professional master is able to adjust the opening and closing mechanism of its holder.

Elevator devices are attractive because the equipment is stored in a ceiling compartment . Thanks to this, the technique is perfectly protected from possible damage, and its fixing settings do not get lost. The considered view of the bracket for the equipment and the process of removing it from the ceiling niche from the side look very interesting and modern. That is why many people make such structures at home using suitable materials at hand.

Often, elevator types of fasteners are installed in large auditoriums, conference rooms, and even theaters . Such equipment can be quite expensive due to its complex structure.

Suspended

Many models of projectors, especially the older ones, are quite impressive due to powerful optics and a heavy power supply . Not every rack mount can support the weight of this equipment. In this case, a way out of the situation can be a bracket with a support platform and a suspension made in the form of a loop.

Most often, heavy models of projectors are made desktop , therefore, there are no threaded bushings required for installation in their housing. In order not to overstep the rules of operation, the equipment is not hung, but are fixed in special suspended platforms fixed on suspensions to the ceiling base.

How to choose?

Ceiling brackets for projector equipment must be selected very carefully, because the level of safety of the equipment will depend on your choice

• First you need to see what is permissible load one or another model of a stand for equipment. This figure must be consistent with the weight of the projector. If you do not know how much your device weighs, take a look at the accompanying documentation: here you will find all the necessary values. Only if you follow this simple rule, you can not worry that the bracket will not withstand the weight of the product.
• note for the placement of all connection holes: they must be the same as the technique. If a simple universal design is purchased, it must be selected in such a way that the platform is configured to the maximum correctly and accurately. This is another safety factor.
• The size of the fastener rod must match the projection distance . That is why, before going to the store, it is necessary to take all the necessary measurements so as not to be mistaken with the purchase of the holder.
• Do not forget about the functionality of the products: the possibility of rotation, tilt. If the bracket has this ability, users will be able to freely adapt the entire structure to themselves. If necessary, it will turn out to change the screen layout area.
• Finding the perfect fastener it is impossible not to take into account the features of the ceiling base on which it will be installed. So, in the conditions of the attic, the roof has an angular structure, so it makes sense to buy here only those types of brackets, the angle of inclination of which can be independently adjusted.

Choosing a mount suitable for the technique, you must carefully examine it … The bracket design must be in perfect condition. The product should not have any damage or defects, look too flimsy and unreliable. If you notice similar flaws in the selected bracket, you should not buy it, since it will not be safe.

How to install?

The bracket chosen for fixing the multimedia projector must be installed correctly. The simplest and most understandable way is the installation of a rack structure to a concrete ceiling slab. Let's consider what stages the work consists of in this case.

1. It will be necessary to transfer the scheme (marking) of the anchoring points of the heel to the surface of the ceiling.
2. Next, you will need to take a punch and make suitable holes with it. You will need them to place the dowel plugs.
3. After that, you can safely expose the bracket itself and tighten the screws.

If we are talking about a suspended ceiling, then the process of mounting the holder will be more complicated. It is recommended to initially select the model of the retainer, which is designed to be attached to the metal parts of the frame base. Let us consider the features of such work on the example of a foundation assembled from the Armstrong system.

1. In the selected area of the false ceiling, you will need to carefully remove 1-2 tiles. You need to act carefully so as not to damage any of the parts.
2. In a ceiling-mounted area, route all cables and wiring necessary for the subsequent connection of the projector equipment.
3. In the decorative panel, using a special ring-type drill, it is necessary to drill a hole necessary for setting the retainer.
4. A jumper must be placed on the metal profile of the suspended ceiling system. To it you will need to attach the heel of the holder, the stand and the "crab" itself.
5. All other components of the false ceiling will need to be replaced in their original positions in the structure.

There are times when it is not possible to choose the ideal type of bracket for the suspension system . In this case, you can cut a decorative panel from a plywood sheet, place it on a metal profile and fix the holder's heel on it.

The process of mounting the holder looks more complicated when it comes to modern stretch ceilings . In such a situation, a wooden insert is often attached to the concrete slab. It is to it that the heel is subsequently attached, right through the tension membrane canvas.

Helpful hints and tips

If you decide to choose and install a suitable ceiling mount for your projector equipment yourself, there are some useful tips and tricks for you to consider

1. If the projector was purchased after the completion of the repair work, then it is permissible to purchase cable channels for it. They have a more aesthetic appearance, so they will not be able to spoil the interior design.
2. An element such as a butterfly dowel is perfect for attaching the retaining parts to a suspended ceiling. To install it, you will need to drill holes that are accurate in diameter, and then securely fix the structure.
3. Before choosing a mounting area for the projector and proceeding to installation work, you should fix the parameters of the screen and determine the optimal place for it.
4. Consider the strength capabilities of the indoor ceiling base. If the ceiling is badly worn out and literally crumbles, then it is better not to overload it with unnecessary equipment. Choose a different mounting option for the projector such as wall or floor.
5. It is recommended to prepare all the necessary tools in advance so that during the work you do not have to throw everything and rush in search of the necessary device.
6. It is advisable to purchase in advance all the necessary decorative elements that will be needed to mask the equipment cables.
7. If you plan to reconfigure the projector bracket by changing its position and height, it is recommended to purchase a copy made from light alloys. Plastic products are preferred when you need the right fittings for classrooms and classrooms.
8. It should be borne in mind that the bulk of modern ceiling projectors are designed for installation heights ranging from 2.5 to 3 meters.
9. If you cannot do without a rod, it is recommended to select holders of a box or frame type.
10. The further away from the screen the device is, the easier it will be to install it on the holder. However, in this case, you will have to resort to even greater shading of the room in which the equipment is located.
11. Attach any type of holder with the utmost care. The structure must be fixed flawlessly. If the retainer is installed in bad faith, one day it may fall from a height, which will end badly both for him and for the projector equipment.
12. If you are afraid to independently install such structures to the ceiling or are worried about their reliability, it is better to call the masters who will do it for you. This way, you insure yourself against damage to the ceiling, bracket and projector.