2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10
Columns are quite an important attribute for various occasions - it can be either watching a movie or a serious gala event. And what is the festive atmosphere without normal musical accompaniment? But sometimes a situation may arise when the speakers begin to whistle or wheeze - phoning. Why is this happening?
Possible reasons
Absolutely any speakers can start phoning, not necessarily just connected, while this can happen suddenly, for no apparent reason. But you should not immediately run to the service center, sometimes a strong and unpleasant sound can be eliminated with your own hands. To do this, you need to find out the cause of the problem, there may be several of them.
Problems in the wires . In some cases, the speakers are completely functional, and the sound arises from the wires that are connected to them. If the speaker starts to flicker, check the integrity of the wiring and the correctness of the USB cable connection.
Sometimes the problems start from the amplifier or equalizer , this happens due to a failure in their settings, usually in this case, the background of a working generator is heard from the speakers.
Improper equipment grounding or none at all.
Moving and incorrect placement of the microphone in relation to the speakers . It is from the microphone that the sound distortions in the speakers most often occur, so first check this reason.
The reason may be incorrect connection settings, failure on the PC .
Well, or is it just a breakdown of the speakers themselves, malfunction in some items .
Some of these reasons greatly affect the quality of the reproduced sound, some of them cause constant unpleasant wheezing and whistling, while others create them periodically.
Most speakers (especially budget speakers) do not have good noise immunity, so you need to place them away from power cables, antennas, outlets, and any devices that may cause interference. Perhaps after using this advice, the problem with audio defects will disappear.
What to do?
Not all of the listed reasons can be eliminated on your own, even if you correctly identified the type of breakdown. You can correct the situation yourself only in a few cases. If the speakers are emitting from the microphone. In this case, you can simply change the location of this or that item. But it is worth considering the fact that not all types of microphones and speakers work well with each other, you may need to change some of these.
Failed settings or incorrect connection settings
Quite often, extraneous noise from the speakers occurs due to the fact that some components of your PC are simply outdated. In this case, you will have to reinstall the drivers. For people who are at an intermediate level versed in computers, this will not be difficult. This can be done in a few steps.
- First you need to click on "Start" and select "Control Panel".
- Then you need to find "Device Manager", if you can't do this right away, use the search function, which is located in the upper right corner of the open menu.
- Next, you need to enter the "Game and Sound Devices".
- After that, you need to find the device you want, right-click on it and update the driver.
In the case of incorrect settings, you can easily find the cause by connecting the speaker to another PC or amplifier.
If the speaker starts working normally when reconnecting, then the problem is in the settings. This can be corrected as follows.
- We open all the same "Control Panel".
- Find the "Sound" icon.
- In the "Playback" tab, select the desired device and use the right mouse button to open its properties. There we adjust the sound, adjusting it to a comfortable one. We periodically check the sound quality until we achieve what we need.
Damaged wires
It is difficult to find this problem, since usually they try to hide all the wiring from the speakers somewhere so that it does not interfere .… If, after the first two steps, it was not possible to remove the sounds, then it is necessary to check the integrity and serviceability of the cables that connect the equipment. If you do not understand electrics, then you cannot solve this problem on your own, however, you will not have to overpay for additional diagnostics of the acoustic devices themselves, but it will be enough to give the connection cables to the specialist or buy new ones.
In all other cases, you can hardly get rid of the problem with your own hands, therefore it is better to call a master or take the speakers to a service center, perhaps the fault is in them . Otherwise, you will only aggravate the situation and spoil the speakers even more.
Recommendations
In order to quickly identify the cause of the problem, you need to know the type of speaker: is it wired or works via Bluetooth, since each of this type has characteristic problem areas that will need to be checked first.
Wired . These speakers are much less likely to break, so in this case, the reason is most likely due to incorrect settings on the computer, or the wires are simply faulty.
Wireless . Here, the reason is usually in the column itself. Be sure to check the speaker for damage and external defects, if they are not there, then the problem is inside the device, and it will be possible to eliminate the unpleasant sound only in a special service.
Reference! Stationary broadband acoustics does not have sufficient protection against external vibrations, this must be thought out in advance in order to avoid the problem of low-quality sound.
Of course, absolutely everything cannot be foreseen, but in most cases, sound problems arise precisely because of physical reasons, which are best eliminated by a master … However, you shouldn't discount incorrect settings and outdated drivers.
Recommended:
The Speakers On The Computer: What To Do? Why Is There Background Noise When The Computer Is Off And The Speaker Is Connected?
Why are the speakers on the computer flickering? How to understand the causes of such a problem and what to do? What can the professionals advise, and where does the sound card on the computer have to do with it?
Do-it-yourself Sound Amplifier For Speakers: A Diagram Of A Home-made Model. How To Make A Transistor Amplifier At Home? How To Assemble A Simple One From A Radio Tape Recorder?
A full-fledged speaker does not work without an amplifier so that music and speech can be heard from it at a decent distance. A low-power preamplifier, which, for example, is equipped with pocket radios and MP3-players, when connected to speakers without a main amplifier, works with overload and may fail.
Smart "speakers" Xiaomi: Review Of The Speakers Mi AI Speaker And Mi AI Speaker Mini. Selection Recommendations
Smart "speakers" Xiaomi will be an excellent purchase for any home. Review of speakers Mi AI Speaker and Mi AI Speaker Mini: what are the features and advantages of the devices of the Chinese brand? Selection recommendations
Tube Amplifier: Single-ended Tube Amplifier For Acoustics And Push-pull Simple Audio Amplifiers For Speakers, Their Principle Of Operation
Distinctive features of a tube amplifier, its advantages and disadvantages, the principle of operation. How to choose the right amplifier with a radio tube. Popular tube amplifier models
How To Connect A Bluetooth Speaker To A Computer? Why Can't The PC See It? Connecting The Speaker To A Computer Running Windows 7 And Others
Connecting a Bluetooth speaker to your computer presents no problems. How to properly attach a gadget if your computer is running Windows 10? Will the speaker fit the Windows 7 operating system? Why can't the PC see it?