Mower "Zarya" For The Walk-behind Tractor "Neva": Types, Installation Of A Rotary Mower And Features Of Operation

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

The Zarya mower for the Neva walk-behind tractor is a convenient and simple attachment option that expands the capabilities of a diesel or gasoline unit. With its help, you can work in areas of a large area. With minimal maintenance, attachments work efficiently and are suitable for continuous use on agricultural facilities for various purposes. The types, features of operation, the installation of a rotary mower when selecting and purchasing equipment require detailed consideration, because the successful use of technology in the future directly depends on these factors.

Why do you need it?

A mower for a walk-behind tractor is an attachment designed for mowing vegetation with various indicators of the thickness and roughness of the stems. The robust design ensures simple and easy operation. Its resource is quite enough for haymaking, harvesting of herbaceous crops.

Unlike manual scythes, such equipment demonstrates a productivity of up to 0.35 hectares per hour, it is not sensitive to the quality of the grass cover, and can be used for clearing areas and preparing virgin lands for further processing.

Views

The Zarya mowers produced by the Kaluga plant "Kadvi" have several modifications, based on which the compatibility of equipment with specific models of equipment is determined. Among them there are the following options, adapted for combination with the "Neva" MB1 and MB2 walk-behind tractors:

• modernized, with an offset frame on top and a V-belt transmission, suitable for mowing especially tall and dense grass;
• KR. 05.000-05 - a universal solution for equipment with a capacity of 5-7 liters. with.

Each of the options presented has its own characteristics and advantages, allows you to work in the most difficult conditions.

If the efforts of a conventional mower are not enough to cut dense growth, then the modernized version, which excludes clogging of the underframe space with mowed stems, will be the preferred option.

Peculiarities

The modern rotary mower for the Neva walk-behind tractor has a simple and understandable principle of operation. It contains cutting discs that rotate during operation. Grass stalks falling between them, young growth of shrubs with a diameter of up to 1 cm is easily cut off. After mowing, the vegetation forms neat rows, which can be easily collected in the future or left to dry for a while.

Rotary mowers are characterized by compact dimensions, so it is convenient to store and transport them at any distance . The Zarya mowers have two discs on the frame, which significantly speeds up and simplifies the mowing process. Such equipment is attached to Neva walk-behind tractors using a special V-belt, which forms a connection with the drive of the main unit. Unlike country models, rotary-type double-disc mowers are considered more powerful and professional, they are used mainly on farms or on large areas.

Among the features of the Zarya rotary mowers, one can note their adaptation to mowing the stalks of cereal crops, which are distinguished by their high strength and hardness. The knives have free play and do their job quite confidently on uneven ground. With the help of a modern rotary mower, it is possible to mow areas with wormholes, dense root mass, and uneven soil areas. The package includes a locking system that is triggered when the permissible loads are exceeded.

Among the obvious advantages of the Zarya mowers for motoblocks, one can note the mechanism for dumping cut grass , which greatly facilitates the process of further maintenance of the site. In comparison with clipping models, it is safer and allows you to work without stopping over large areas of the area.

Not without its drawbacks. The weak point of this model is the belt drive, which is subject to accelerated wear during operation due to the mobility of the connection.

Installation

Installing attachments on a walk-behind tractor implies adherence to a certain order of actions. The Zarya attachment is fixed as described below.

1. The mower supplied ready to start is cleaned of external preservation.
2. Fix the tensioning device between the walk-behind tractor and the attachment.
3. The drive pulley is fixed with special nuts and cotter pins, the connection is lubricated with grease.
4. Connect the mower to the pin of the walk-behind tractor, attach it to it.
5. The V-belt is fixed.
6. A protective curtain is installed to ensure the safety of the operator's legs, secured.
7. Check the compliance of the work performed with the assembly diagram. If necessary, perform additional manipulations.

In the process of installing additional equipment, it is very important to carefully monitor the completeness of the purchased equipment, carefully check all connections. The manufacturer's recommendations take into account all the features of each modification of the technique. When buying a modified version, you should follow the installation instructions.

Recommendations

The mower installed on the walk-behind tractor should be put into operation only if all requirements are met. Start-up and adjustment must not be carried out if there are passers-by within a radius of 25 meters. The engine of the walk-behind tractor is driven first. After warming up, you can start up the mower. In this case, the engine speed should not reach its maximum values.

In a new mower, after the first 30 minutes of operation, all attachment points must be checked . If they are loosened, then the fasteners are fixed in a given position. The equipment is turned off only at the minimum engine speed of the walk-behind tractor.

Exploitation

During the operation of the walk-behind tractor in tandem with the mower, it is imperative to monitor its serviceability and readiness for work. During operation, every 5 hours it is recommended to control:

• tightening of fasteners;
• the degree of sharpness of the cutting elements;
• reliability of belt drive tension.

Every day after 12 hours of operation, the lubricated units should be treated with lithol or grease. If signs of malfunction appear, the process of use should be suspended. In the process of work, the operator must wear special goggles, use overalls.

Mowing grassy or mixed fields and plots requires speed - it must be done without haste or jerking. The movement of the cutting tool should be smooth, gradual. It is forbidden for people to pass in front of the front edge of the walk-behind tractor when the mower is installed on it.

The purchase of the Zarya mower can be a good solution for improving the existing Neva walk-behind tractor . The selection of various modifications of equipment allows, without changing the technique, to carry out the widest possible range of work, including mowing grass in large areas, autumn harvesting of agricultural crops.