Motoblock Pubert: Characteristics, Choosing Attachments For The Vario 70B TWK, Latch And Belt, Operating Instructions

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Motoblocks were first produced by the French company Pubert. This manufacturer produces the widest range of similar units, suitable for all occasions. About 200 thousand motoblocks are produced annually under the Pubert brand. The products are distinguished by wide functionality and original design developments.

Peculiarities

The Pubert company appeared in France in the 40s of the XIX century - in 1840 the company released a plow. The production of gardening equipment took on an industrial scale in the 60s of the XX century, and the headquarters of the corporation is based in the town of Chanton in the north of France. Pubert is famous for quality, inexpensive products that can serve faithfully for decades.

Dozens of items are produced in our time, including:

• lawn mowers;
• seeders;
• walk-behind tractors;
• snow cleaners.

The Pubert walk-behind tractors are especially popular, their advantages:

• easy to operate;
• versatile in use;
• reliable and durable;
• economical.

The gasoline engine has a volume of 5 liters, is easy to start, has air cooling, which greatly simplifies the operation of the unit. The width of soil cultivation largely depends on the parameters of the cutters; cultivation can be carried out up to 0.3 meters in depth. Motoblock from "Pubert" is easy to move around the site.

Additional specifications:

• chain transmission;
• number of gears - one forward / one backward;
• capture parameters 32/62/86 cm;
• Cutter diameter 29 cm;
• the oil tank has a volume of 0.62 liters;
• the gas tank has a volume of 3, 15 liters;
• total weight 55.5 kg.

Consider two popular models

• Pubert ELITE 65B C2 has good performance characteristics. It can handle an area of up to 1.5 thousand square meters. meters. Has a gasoline engine with a capacity of 6 liters. with. Chain drive, number of gears: one forward, one back. The working width reaches 92 cm. The fuel capacity is enough for 3, 9 liters. Weighs 52 kg.
• Pubert NANO 20R appeared relatively recently, but has already gained great popularity among farmers throughout Europe. Has a light weight, petrol engine 2.5 liters. with. The gearbox can work at low speed, which allows you to cultivate wet "heavy" soil. The model, small in parameters, is optimal for summer cottages, greenhouses, gardens. The bed can be processed with this unit up to half a meter wide. You can fill the tank with 1, 6 liters of gasoline. There is a functional oil level control - the engine will not start if there is not enough oil in it.

The miniature Pubert NANO 20R is very popular, with such a device it is possible to process up to 500 sq. meters of area.

Its characteristics are as follows:

• the engine runs on gasoline;
• has one gear;
• grip (width) is allowed up to 47 cm;
• the fuel tank holds 1.6 liters;
• weight 32.5 kg.

Advantages and disadvantages

The Pubert unit is a functional and inexpensive device. It is difficult to imagine a better car for working in a garden. The French company enjoys prestige among farmers and has a reputation as a company that produces high-quality and reliable equipment. Models are equipped with Japanese power units from Honda and Subaru.

The disadvantages include the presence of plastic fenders that cover the wheels. They quickly deteriorate.

Distinctive performance characteristics, which can be called advantages:

• small size;
• good power and cross-country ability;
• speed control;
• reliable starter;
• good layout of throttle and clutch levers;
• trouble-free transmission;
• well-fitted gearbox;
• economical fuel consumption;
• the motor resource reaches 2100 hours.

The disadvantages include:

• the presence of backlash between the cutters;
• during operation, it is necessary to adjust the fasteners on the gas and the casing itself;
• the gear pulley is not made reliably - it breaks if you use the unit on virgin soil.

Also "Pubert" is favorably distinguished by good air cooling, a large fuel tank. The machine is made of durable lightweight materials.

The manufacturer produces a wide range of different motoblocks, there are plenty to choose from.

Specifications

The technical characteristics of motoblocks are similar, the difference can be observed only in the parameters of different engines. For example, the latest development of the Pubert ARGO ARO model is equipped with a power plant with a capacity of 6, 6 liters. with., has two forward speeds and one reverse. The unit weighs about 70 kilograms.

Several years ago, the company released modified Vario units, which were based on the Pubert PRIMO. An improved clutch has been supplied, with clutch and throttle controls on the handles. The drive is made of a belt, the gearbox is a non-separable chain.

"Pubert" works with a variety of attachments, the "Vario" series meets all the requirements for the functionality and versatility of attachments.

Model Pubert VARIO 60 SC3 can carry loads of up to half a ton and easily move on waterlogged soils.

The design of Pubert walk-behind tractors is always first-class assembly and trouble-free operation for a long time. Lubrication of the assemblies is done with universal water-repellent materials. The power plants on the units are highly reliable. The units are presented in a variety of modifications and functionality options.

Pubert units, according to reviews of numerous users, have a number of advantages that are not observed in competitors.

First of all, it is versatility, there are also other advantages:

• four-stroke engine;
• good cutters;
• opener with two sides;
• pneumatic wheels.

The equipment can be adjusted to suit the height of the operator for added comfort. Horizontal limiters make it possible to work closely. The engines have the highest power among similar motoblocks, this is also positively noted by users. The cutters can work at any angle, allowing them to penetrate the soil at a wide variety of angles. On the motoblocks of this company, you can process any soil.

On French units, there are worm (or chain) gearboxes, which allows you to cope with a wide variety of soils, even with low engine power.

Often folk craftsmen change the clutch cable to a stronger one, "borrowing" it from VAZ … This operation is simple, you just need to put the adapters correctly. At the same time, the start of the engine becomes noticeably better, which prolongs its service life.

If the walk-behind tractor is actively used in the cold season, then replacing the cable will be especially useful.

Models

Another famous all over the world model Pubert VARIO 70B TWK - one of the best produced by the corporation over the past thirty years. It has a gasoline engine and is appreciated among professionals. It is possible to use a huge number of very different trailed equipment, which allows you to cultivate hectares of soil in a short time. The unit can have up to 6 cutters, and the width of the section can vary from 30 to 90 cm.

Two speeds allow you to reach speeds of up to 15 kilometers per hour. The model is easy to repair, there is a collapsible constructor.

Performance characteristics of the Pubert VARIO 70B TWK unit:

• you can process up to 2, 5 thousand square meters. meters of area;
• power 7, 5 liters. with.;
• gasoline engine;
• transmission - chain;
• the depth of penetration into the ground is up to 33 cm.

This device copes especially well with virgin lands, in which there is little moisture. The car starts easily. Air cooling, which makes it possible to handle such a mechanism without any difficulties. There is a reverse speed, there is also the ability to adjust the handle up / down. The unit works almost silently, weighs only 58 kg, which makes it easy to move around the site with it.

In professional circles, the Pubert Transformer 60P TWK model is appreciated … This unit has a four-stroke engine. Only one liter of fuel is consumed per hour. The walk-behind tractor can work non-stop for quite a long time, without refueling. There are two speeds (reverse speed is also provided). The cultivation width can be varied, which is very helpful for gardeners when processing beds of different sizes.

It should be noted the very convenient functionality, in particular, the control knobs. It is simple and easy to work with such a unit.

TTX Transformer 60P TWK:

• engine with a capacity of 6 liters. with.;
• power plant - gasoline engine;
• the gearbox has a chain;
• number of gears 2 (plus one reverse);
• the grip can be up to 92 cm;
• the cutter has a diameter of 33 cm.
• gas tank 3, 55 liters;
• weight 73, 4 kg.

Equipment

The complete set of the unit from "Pubert":

• pneumatic cutters (up to 6 sets);
• adapter;
• belt;
• coupling;
• plow;
• hiller.

Optional equipment

Motoblocks can be equipped with the following main and additional implements.

• The most demanded attachment is the plow, which makes it possible to quickly and efficiently "raise" the soil.
• Soil cutters are also useful (they are included), with the help of which they weed and loosen the soil, as well as uproot various weeds.
• The hiller is used to create furrows, which can then be used for planting.
• A potato digger (planter) is often used, which significantly reduces labor costs. A similar unit can be attached to the walk-behind tractor in a couple of minutes using a latch.
• The seeder facilitates the process of sowing various crops, reduces the time resources required for sowing.
• The harrow helps break up clods of wet or dry soil.

• The flat cutter allows you to weed and loosen the soil between the rows.
• The trailer (on professional models) can carry a wide variety of cargo.
• Couplings vary significantly in size, they allow you to attach attachments.
• In work, it often happens that you need a mower. During the mowing period, it is very much in demand.
• The adapter can transform the walk-behind tractor into a small tractor, while the driver can sit in a sitting position.
• The set of cutters supplied with the walk-behind tractor makes it possible to work with a variety of soils.

Selection Tips

The Pubert product line is a wide variety of units that are designed to do any job.

• Eco Max and ECO these mechanisms are designed for plowing up to 20 acres. The dimensions are compact, there is a reverse and a transmission.
• Motoblocks Primo supplied with a pneumatic clutch, which is adjusted via a handle.
• Walk-behind tractors Vario - these are units of increased cross-country ability and mass, have large wheels.
• Compact line - these are electrical mechanisms of low power, work in small areas, have a simple design.

Knowing such a differentiation, you can choose the right unit, while you do not have to be a great specialist and understand the technique thoroughly.

Operation and maintenance

Each unit of products sold is accompanied by a detailed instruction manual from the manufacturer, which should be familiarized with before starting work in a charming manner. Official representatives of the Pubert company advise using gasoline with an octane rating of at least 92 for engines.

In addition, preventive examinations and testing should be carried out regularly.

Before subjecting the unit to loads, you should "drive" it at idle speed , such a running-in will not be superfluous at all, all working units and spare parts must "get used". After idling, it is recommended to run in the equipment at 50% load for about 20 hours … These measures will extend the life of the walk-behind tractor.

If the car has been in the garage all winter, then before the season of work, a light break-in should also be done … To do this, start the engine and leave it running for 30 minutes.

And also it is necessary to do the following procedures several times:

• increase engine speed, and then sharply reduce them;
• be sure to switch gears;
• check the oil level before starting work.

And some more recommendations

The first 4 days of operation after a long downtime, the walk-behind tractor should be loaded at 50% of the planned capacity

• At the beginning of operation, a cursory preventive examination should be done for the presence of fuel or oil leaks.
• The machine must not be operated without protective covers. Sooner or later, components and spare parts for the mechanism will be required.

At the end of the break-in period, the oil in the unit changes completely. As well as filters for fuel and oil.

The manufacturer strongly recommends using only "native" nodes.

As an example, we can say in terms of prices:

• reverse gear - 1 thousand rubles;
• tension roller - 2 thousand rubles.

Oil should only be used SAE 10W-30 … Preventive examination and testing is required on a regular basis.