Mills For The Neva Walk-behind Tractor: Active And Additional, Features Of The Operation Of The Celina And Crow's Feet Mills. How To Assemble Correctly?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

The milling cutters for the walk-behind tractor are the most demanded module and are often included in the basic equipment of the units. The widespread use and popularity of devices is due to the efficiency of their use, simple design and high consumer availability.

Features and purpose

By its design, the milling cutter for the walk-behind tractor consists of several tillage knives mounted on the axis of rotation. For their production, 2 types of steel are used: alloyed and high-carbon , and the second is treated with high frequency current and mandatory thermal hardening. Thanks to the use of such materials, the products are very strong and durable.

The scope of application of milling cutters is quite wide, and includes all types of soil processing.

With the help of this device, loosening of the soil, removal of weeds, plowing of virgin lands and digging of a vegetable garden in spring and autumn are carried out . In addition, the use of cutters is effective when applying mineral and organic fertilizers, when deep and thorough mixing of the soil with preparations is required. Thanks to careful plowing, it is possible to achieve the optimal density of the soil, increase its chemical and biological activity, and also significantly increase the yield of agricultural crops growing on the cultivated soil.

In addition to the module included in the kit, it is possible to purchase and place additional pairs of cutters . With their help, it is possible to improve the controllability of the unit and improve the quality of soil cultivation. However, you should not especially overload the walk-behind tractor, this can cause overheating of the engine and lead to its breakdown. In addition, there are some limitations associated with installing additional kits. For example, when plowing virgin lands, the use of additional equipment is not recommended. For such processing, one module included in the basic kit will be enough.

But for regularly cultivated light soil, the installation of several additional cutters will only be beneficial.

Varieties

The classification of cutters for a walk-behind tractor is based on several criteria. So, at the location, they can be lateral and hinged . The former are installed on the wheel drive shafts on both sides relative to the power unit. With this arrangement, the cutters play the role of wheels, setting the walk-behind tractor in motion. The second method of placement involves installing them behind the walk-behind tractor and working from the power take-off shaft. This arrangement is most typical for most modern motoblocks, including such well-known brands as Celina, MTZ and Neva.

The second criterion for the classification of cutters is their design. On this basis, 2 types are distinguished: saber (active) cutters and "Crow's feet".

Saber cutters

They are included in the basic complete set of the walk-behind tractor and are the most popular among farmers. The cutters have a collapsible design, which makes their installation, maintenance and transportation very convenient and simple. The active cutter is made in the form of a block that includes four cutting mechanisms located at right angles to each other. The knives are fastened using bolts, washers and nuts, and the number of blocks on each side of the drive can be 2-3 or more. Welding is not used in the manufacture of cutters. This is due to the special properties of high-carbon steel and its immunity to this method of joining.

The knives that make up the cutter are quite simple and are steel strips curved at the edges . Moreover, they are assembled into a block in such a way that bends in one direction alternate with bends in the other. Due to the shape of the knives, resembling a saber, active cutters are often called saber cutters. This design, combined with the high hardness and strength of the material, makes it possible to use this type of equipment when plowing virgin lands and heavy soils with a high content of stones and roots.

For self-production of saber cutters, it is recommended to use spring heat-treated hardened steel grade 50-KhGFA

Hound's Feet Mounted Cutters

These cutters have a one-piece, non-separable design, due to which they are characterized by high strength and long service life. With their help, you can not only effectively work stony and clay soils, but also fight small weeds, and also deeply loosen the soil. Standard factory-assembled models have rather compact dimensions: 38 cm in length, 41 in width and 38 in height, while the weight of the structure is 16 kg.

By its name, this type is due to the design features of the knives, which are presented in the form of pointed triangular plates located on the edges of steel rods, and vaguely resembling crow's feet in shape. The number of cutting elements can be different - from 4 pieces in factory models and up to 8-10 in homemade samples.

With an increase in the number of knives, the quality of soil cultivation increases markedly, however, and the load on the engine also becomes much greater . Therefore, when making your own grip cutters, it is necessary to take this fact into account and not overdo it. The maximum speed at which a walk-behind tractor equipped with Hound's Feet cutters can move is 5 km / h, which corresponds to the average speed of an adult. In this regard, it is quite convenient and comfortable to operate such equipment. The material for the manufacture of cutters is low-carbon steel of medium density, which is why knives are often susceptible to breakage and deformation when working with problem soil.

Criterias of choice

Before proceeding with the purchase of milling cutters for a walk-behind tractor, you need to correctly assess the operating conditions and the type of soil to be cultivated. So, if you intend to work on rocky areas, then it is better to purchase a saber-shaped model. Such equipment will more easily cope with difficult soils, and in the event of a breakdown, it will be easier to repair it. To do this, it is enough to unscrew the damaged knife and put a new one in its place.

If you plan to plow virgin soil, then it is better to choose the "Hound's Feet" cutter . It is well suited for the cultivation of heavy soils, as well as for deep plowing up to 30-40 cm. However, the gripping model is absolutely not suitable for working with sod soils: the knives will wind grass and long roots around themselves, and work will often stop.

For such cases, you need to put exclusively a saber cutter.

Installation tips

It is quite simple to assemble and install the cutter on the walk-behind tractor. To do this, the unit is resting on the coulter and rotated at an angle of 45 degrees. Then they make X-shaped blocks of wood and rest the handle of the walk-behind tractor on them. It is optimal if the height of the tragus is about 50 cm. After a reliable stopper is provided and the unit is quite stable, they begin to remove the wheels.

To do this, use a special key, which, as a rule, is included in the basic package of the walk-behind tractor . Then the required number of cutters is installed on the wheel drive shafts. For especially powerful models, their number can reach six, for the rest of the units, two will be enough. The cutters must be installed counterclockwise. This will help the knives to self-sharpen while the walk-behind tractor is moving and will eliminate the need to do it additionally.

Operating rules

So that working with cutters is not difficult, there are a few simple rules to follow.

1. Before starting work, you must adjust the height of the handle.
2. On the back of the walk-behind tractor, it is necessary to install a coulter that plays the role of an anchor and helps to make the cultivation more even.
3. Then you need to start the engine and let it idle for 5 minutes.
4. After the motor has warmed up, engage gear and bring the opener to the minimum position.
5. You should not stay for a long time in one area, otherwise the technique will get bogged down.
6. When the cutters overlap, it is necessary to reduce the speed, and after passing through difficult sections, increase it again.
7. It is advisable to install a protective disc at the end of the cutter. This will prevent accidental cultivation of flowers or other plants, and will help to carry out processing strictly in a given area.