Motoblock Patriot "Volga": Characteristics Of The 7 Liter Gasoline Model. With. Clutch Adjustment. Owner Reviews

Table of contents:

Video: Motoblock Patriot "Volga": Characteristics Of The 7 Liter Gasoline Model. With. Clutch Adjustment. Owner Reviews

Video: Motoblock Patriot
Video: #992. GAZ 2169 Kombat [RUSSIAN SUPER AUTO] 2024, May
Motoblock Patriot "Volga": Characteristics Of The 7 Liter Gasoline Model. With. Clutch Adjustment. Owner Reviews
Motoblock Patriot "Volga": Characteristics Of The 7 Liter Gasoline Model. With. Clutch Adjustment. Owner Reviews
Anonim

Motoblocks have already found wide application in the daily cultivation of the land. But in order to satisfy your needs, you need to carefully choose the appropriate design. One of the best options is the Patriot Volga walk-behind tractor.

Peculiarities

Patriot Volga is a relatively compact device, which does not prevent it from working with high productivity. The budget class device is different:

  • high maneuverability;
  • the ability to satisfy the needs of even the most demanding owners;
  • suitability for work in agriculture and communal services.
Image
Image
Image
Image

The walk-behind tractor has a fairly powerful motor capable of delivering high torque . This allows you to drive confidently, despite all the obstacles that may be encountered on the field or summer cottage. At the same time, the characteristics of the engine allow the use of heavy auxiliary equipment. The device is extremely stable when working hard soil.

Moving the walk-behind tractor within the garden almost does not cause problems, because the designers took care of special transport wheels.

Image
Image

Positive aspects of the model

Patriot Volga can easily overcome off-road sections. Thanks to the adjustment of the motor power, it is possible to adapt the walk-behind tractor to perform a variety of tasks. The performance of the device is indicated by the fact that it plows a strip of land with a width of 0.85 m in 1 pass. Only a few similar devices from other manufacturers are able to solve this problem. The affordability of maintenance and consumables is also important for any farmers and gardeners.

Also worth noting:

  • Volga runs quietly on 92nd and 95th gasoline;
  • thanks to special inserts located on the sides and in front, the body of the walk-behind tractor is reliably covered from various damages;
  • the delivery set includes cutters of increased power, allowing you to plow even virgin soil;
  • the device is controlled by a comfortable handle with a rubberized handle;
  • the location of all control elements is carefully thought out;
  • there is a durable bumper in front of the motor that absorbs most accidental shocks;
  • wheels of large width are put on the walk-behind tractor, adapted to a variety of surfaces and climatic conditions.
Image
Image
Image
Image
Image
Image

How do I get started?

Having bought a Volga, you should immediately find out from the sellers whether a run-in with the highest load is needed. Most often, however, they are limited to gentle running. It will allow the parts to work in and adapt them to the actual weather. The instruction manual says that the first start of the engine should take place at idle speed. Working time - from 30 to 40 minutes; some experts advise to systematically increase the turnover.

Next, they are engaged in setting up the gearbox and adjusting the clutch to fit their needs . Be sure to see if the switching mechanism is working properly, whether it works quickly. In new walk-behind tractors, the slightest extraneous sounds, especially vibration vibrations, are categorically unacceptable. If something like this is found, you must immediately use a repair or replacement under warranty. But that is not all.

Image
Image
Image
Image

When there are no noises and knocks, extraneous shaking, they still carefully look to see if the oil is leaking below. Only with a negative answer, they start running in themselves. It can be accompanied by a variety of work:

  • movement of goods;
  • hilling the earth;
  • cultivation;
  • plowing of already developed lands and so on.

But it is very important that at this moment there should not be increased loads on the working nodes. Therefore, it is better to refuse to plow virgin soil during the running-in, otherwise there is a great risk of breaking the main parts of the walk-behind tractor. Usually it is run in for 8 hours. Then assess the technical condition of the device, individual parts.

Ideally, the Patriot should be ready to operate at full load from the next day.

Image
Image

Motor capabilities and equipment used

Motoblock "Volga" is equipped with a four-stroke gasoline 7 liters. with. engine with a capacity of 200 ml. The total fuel tank capacity is 3.6 liters. The engine has a single cylinder. Thanks to a special study of the reverse, the walk-behind tractor is able to rotate 360 degrees. The Volga's gearbox has 2 forward and 1 reverse speeds.

Image
Image
Image
Image
Image
Image

The manufacturer supplies his walk-behind tractor without additional options. It can be equipped with:

  • hiller;
  • cultivation cutters;
  • carts;
  • plows;
  • hooks for the soil;
  • mowers;
  • diggers and planters for potatoes;
  • pumps for pumping water.
Image
Image
Image
Image

Owner reviews

Farmers using the Volga walk-behind tractor describe it as a powerful machine with decent performance. Even with a very heavy load, the hourly fuel consumption will not exceed 3 liters. The walk-behind tractor is excellent for digging up the earth, harrowing and other works. It should be noted that some users complain about the insufficient effectiveness of vibration protection. But the "Volga" pulls well uphill and overcomes the harsh off-road.

Image
Image

How to assemble a router bit?

A typical cutter is assembled from a couple of blocks. Both blocks contain 12 small cutters distributed over 3 nodes. The knives are mounted at an angle of 90 degrees. They are attached on one side to the post and on the other to the flange, thereby creating an unbreakable welded structure. This solution is considered to be very reliable; but if you intend to use cutters constantly, it would be more correct to choose factory designs.

Recommended: