How Many Facing Bricks In 1 Sq. M Of Masonry? 27 Photos Calculation Of The Number Of Pieces Of Products In One Square Meter. How Much Cladding Do You Need For Your Home?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

The need to calculate the number of facing bricks in 1 sq. m of masonry arises in cases where a decision is made to finish the facade of a building. Before starting the formation of masonry, it is necessary to calculate the number of pieces or modules in one square meter. It can vary depending on the type of masonry used, wall thickness. By calculating in advance how much cladding is needed for the house, you can prevent possible errors in the purchase of materials and ensure the most rational use of them when carrying out work.

Sizes and varieties of bricks

There is a certain dimensional grid of bricks, adopted in the EU and Russia (GOST). It has differences that must be taken into account when purchasing and calculating materials. In particular, domestic products are more focused on the convenience of masonry with joining on long sides (spoons) or short sides (pokes). European manufacturers focus on the decorative component of the masonry. It is the individuality of the design that is highly valued here, and the component parts do not have to be ideally adjusted to each other.

In particular, the European standard allows the following size range (LxWxH):

• 2DF 240x115x113mm;
• DF 240x115x52 mm;
• WF 210x100x50 mm;
• WD F210x100x65 mm.

Russian standards also provide opportunities for varying the height of each layer of masonry. So, single options are distinguished with an indicator of 65 mm, double ones - 138 mm high, one and a half - 88 mm. The dimensions of the long and short edges are standard for all variants: 250x120 mm. When calculating the amount of materials required, it is worth considering the selected thickness of the masonry joint. For example, in 1 m2 of masonry with mortar - 102 pieces of single bricks, and without counting the jointing, this figure will already be 128 units.

Types of masonry

The choice of masonry pattern has a great influence on the consumption of material. When facing buildings and structures, blocks of different colors are often used, a mosaic pattern or continuous coating is formed, which is expressive due to the use of an unusual color range of products. Decorative options for brick cladding are especially in demand in Europe, where entire collections of solutions for facade finishing in a particular style are produced.

The very process of forming a masonry layer always involves two components - mortar and brick. But the sequence and method of installing a solid wall can differ significantly. Among the most popular options for external ornamentation, several types can be distinguished.

• Block type of masonry . It is characterized by alternation of rows with long and short parts of bricks on the front side of the facade. At the same time, the joints coincide, providing an opportunity to create a harmonious facade solution. In the Gothic version, the same sequence of using the long and short sides is performed, but with offset joints.
• Track . The masonry is formed with an offset of half the length of the brick in each row. The coating has a visual appeal. There is always the longest part of the product on the front side.
• Lipetsk masonry . It is characterized by the preservation of joints along the entire height of the outer wall. The rows are combined in the following order: three long elements to one short one. It is possible to use modules of different colors.
• Tychkovaya . On the facade, only the short side is used, shifting as the rows are laid out.
• Spoon laying . Formed along the long side (spoon). The offset is 1/4 or 1/2 brick.
• Brandenburg masonry . It is characterized by a combination of two spoon and one butt element. In this case, the short side is always displaced so as to be located at the junction of the long parts.
• Chaotic way . It allows you to form a facade finish using colored bricks of different colors. In this case, the arrangement of the modules is chosen arbitrarily, it does not have a clear ordering.

In the construction industry, other popular and demanded options for installing a facade decorative coating are also used. It is worth paying attention to the fact that when choosing a type of masonry with a clear sequence of elements, it is imperative to carefully maintain the appropriate density and fluidity of the solution in order to avoid possible problems with distortion of the seam line.

Calculation of the area of the walls

In order to calculate the total area of the walls and get the amount of bricks required for the house, you will have to perform some preliminary steps. There are certain standard values that can be taken into account when placing an order.

For example, the number of items in a pack is calculated based on its height (on average, it is 1 m) and dimensions. In the square, the number of bricks is calculated taking into account the use of mortar and without it. For example, a thin facade cladding of 0.5 bricks in a single version requires the purchase of 51/61 pcs. If the supplier offers to consider the material as pallets, remember that 420 standard size items can be placed on the pallet.

When calculating the area of the walls, there are also a number of factors to consider. So, be sure to remember the need to accurately measure all parameters of the facade to be cladding. To get them, you will need:

• multiply the length and height of each wall (performed for objects of any configuration);
• get the total area of the facade structure by adding these values;
• measure and calculate the area occupied by door and window openings;
• add the resulting data together;
• subtract similar parameters for doors and windows from the total area of the facade;
• the obtained data will become the basis for further calculation of the amount of materials.

The footage of all surfaces that need brick cladding will only have to be multiplied by the number of elements in 1 m2. But this approach cannot be called completely objective. Indeed, in the process of work, joining, laying out corners and openings is performed, which also requires the use of additional volume of materials. Both marriage and battle are taken into account when processing brick blocks.

Methods for counting products

Calculate the number of facing bricks in 1 sq. m masonry can be done in different ways. The number of pieces of building modules depends on how the masonry is made. Facing is most often made in half-brick, since it is fixed around the main wall. But if it is required to significantly increase the heat-insulating or sound-insulating properties of the structure, you can mount the facade in 1, 1.5 or even 2 bricks.

In this case, in the presence of seams, the number of elements in 1 m2 will be as follows.

Brick type	Number of pieces when laying in 0.5 bricks with mortar	in 1 brick	1.5 bricks	in 2 bricks
Single	51	102	153	204
One and a half	39	78	117	156
Double	26	52	78	104

Without taking into account the seams, the calculation of brick consumption per 1 m2 of masonry will be as follows.

Brick type	Number of pieces when laying in 0.5 bricks without mortar	in 1 brick	1.5 bricks	in 2 bricks
Single	61	128	189	256
One and a half	45	95	140	190
Double	30	60	90	120

Affects the number of elements in one square meter of decorative cladding and the type of modules used. High double and one-and-a-half options will give a decrease in mortar consumption. For single elements, the consumption of the bricks themselves will be higher. For counting, it is also worth considering the number of bricks in the pallet.

When ordering material, it is important to know other parameters and indicators of the purchased products . In particular, when delivered in bulk or in bundles, there are 512 bricks in a cube. It should be added that in this case, the averaged values should be used only when calculating masonry with the same arrangement of elements (only with a spoon or only with a butt edge).

In addition, if you are calculating pieces in one cubic meter of the wall, you will have to take into account the proportions of the seam. They account for up to 25% of the total. Carrying out works with a standard thickness of joints allows you to ensure a flow rate per 1 m3 of 394 units of products.

Indicators of the thickness of the masonry should be determined individually . In the case of using double or one-and-a-half bricks, it is imperative to take into account all indicators associated with a decrease in the amount of material. In addition to the volume, you can make calculations based on the indicators of the area of the walls. This will provide a more reliable result. For external walls, the error rates reach 1.9%, for internal partitions - 3.8%.

When choosing a calculation method, it is imperative to take into account all possible aspects related to the performance of work. The length and width of the masonry joints, if different from the standard, should be taken into account in the calculations. The number of bricks per 1 m2 or 1 m3 in this case will be less than the average.

Before starting finishing work, you should take care of purchasing the appropriate amount of materials for decorating facades. The consumption of facing bricks should take into account the thickness of the joints, the area of the walls, the method of forming the masonry. This approach will avoid problems with lack of materials.

In addition, when calculating, it is necessary to take into account the breakage of bricks in the process of work. The stock should be approximately 5%. With the correct calculation of the required amount of material, it is possible to ensure the smooth progress of work when forming the decorative cladding of the facade of the building.