2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09
Among the most demanded masonry materials, a red single solid ceramic brick with dimensions 250 x 120 x 65 stands out. It is made from clay with the addition of other components, which ensures high material performance. Among them are high density, frost resistance, thermal conductivity and so on.
Types and classifications
Due to the fact that this product has certain standard dimensions and weight, this makes it possible at the preparatory stage to calculate the required number of bricks for the construction of a particular object. The known weight helps to organize the question of material transportation, to make the choice of a car depending on its carrying capacity. Ordinary facing bricks have standard sizes; they are usually used for masonry walls. They can build partitions and other structures.
It is classified by type
- Standard.
- Facing.
- Refractory.
Parameters
One-and-a-half brick M 125 has a different weight, which depends on the size of the product itself. All these characteristics are determined by GOST 530-2007, and therefore, such material is produced in compliance with the size scale.
Single . They are used for the construction of load-bearing walls or masonry structures (250x120x65).
One and a half . This thicker version of the M100 has a high thermal conductivity and is heavy, and therefore is often made with voids inside to reduce weight. Its size is 250x120x8.8. There is M125.
Double . Bulk brick M200 has improved characteristics and has dimensions of 250x120x13.8. There is M250.
Since bricks are usually manufactured at the factory according to certain standards, it is necessary to adhere to the specified values during operation. Of course, it is not always possible to produce bricks the same, and therefore they may differ slightly in weight and size.
Depending on the presence of voids in the body of the brick, its cost also differs. For example, hollow material costs less than solid material because less raw material is required to manufacture. Hollow samples adhere well to each other in the masonry, cement enters the voids and reliably holds the blocks. At the same time, the density of a full-bodied product is higher.
Weight
An ordinary brick has a different weight, which is determined depending on its type. This is also regulated by GOST. Stones M 200 and M 250 and other types can weigh from 3.5 to 4.3 kg. Each manufacturer must indicate along with the dimensions of their products and their weight, as well as other parameters, which simplifies the choice for the buyer.
Brick density
There are certain reasons that affect the density of the product, regardless of its grade. There are several of them.
- Humidity . The brick collects the main volume of water only when the sample is laid. Subsequently, this parameter may vary depending on the conditions, as well as the place of use of the material. If a stone cannot retain moisture in itself, it means that it allows air to pass through, and therefore a product that absorbs moisture is usually used to equip cellars, basements and sewers.
- Cracks . The natural properties of raw materials are cracking when dry, but with the use of polymer compositions today it is possible to achieve an improvement in the density of bricks.
- Clay grade . From the place of occurrence of raw materials with the same volume, it can have a different weight, which is reflected in the density.
- Red bricks may vary in weight and size , it is a good building material from which you can not only build structures, but also use it for a fireplace or for other purposes. The weight and dimensions of the product are selected in accordance with the place of use. The standard production and parameters of this material make it possible to initially determine the load on the foundation that it will exert, to simplify the method of transporting it to the facility.
Applications and advantages
Today, different manufacturers make a wide range of ceramic bricks, which can be used for various purposes:
- during the construction of partitions;
- for cladding;
- bookmarking bases and other things.
If we talk about the advantages of this material, then it should be noted that ceramic solid bricks are used more often than other types of building stones.
It has many advantages
- It is durable and durable.
- Environmentally friendly, frost-resistant, fireproof material.
This product does not absorb moisture and can provide good sound insulation, is harmless to humans and the environment, and is inexpensive.
Frost resistance
This indicator is important when choosing a material and determines the number of times that a brick is able to withstand defrost / freeze. Frost resistance is indicated by the letter F, and the class is assigned after testing in laboratory conditions.
In accordance with DSTU B V. 2.7-61-97, the stone that will be used for cladding must have a grade of at least F 25, and therefore it is worth paying attention to this factor when choosing. Of course, it is also important that the frost resistance index is slightly higher, but this will affect the cost of the product.
Thermal conductivity
This parameter speaks about the efficiency of heat conservation by brick in the room. Thermal conductivity is provided by the structure of the product and the presence of voids in the body. It is important to take such indicators into account when erecting load-bearing external walls in order to determine the need for additional insulation. The presence of voids in the brick body makes it possible to reduce heat loss and reduce the layer of additional insulation.
Density
This is the main characteristic that is taken into account when choosing a brick and affects its weight and strength. Bricks without voids are usually used for the construction of load-bearing walls, and products with voids are used for the construction of partitions and other works.
Usually, density is taken into account by construction companies that build large structures. This indicator is taken into account when transporting products, since the weight of the brick also depends on the density.
Minuses
Despite all the positive qualities of ceramic bricks, it also has certain disadvantages that must be considered when buying. The main disadvantage is that this product cannot be used for finishing or facing bases, since it does not have a beautiful appearance, therefore, when using such a material, it will be necessary to additionally plaster the surfaces or treat them with other decorative compounds.
Despite such disadvantages, ceramic bricks are widespread and popular, as they can withstand quite heavy loads. It will not lose its characteristics and parameters throughout the entire period of use, and if necessary, it can be easily dismantled and transported to another place for the construction of other facilities.
As you can see, this material has certain advantages and disadvantages, which must be taken into account when choosing. It is advisable to work with him with experience in masonry, since work may not justify expectations with the wrong approach. It is very important for the construction of various structures to seek help from specialists who will not only help lay out the walls, but also make all the necessary calculations so that the structure can stand for a long time.
Recommended:
Glass Ceramic Hob Scrapers: Options For Cleaning Glass Ceramic. How Do I Use The Ceramic Hob Scrapers?
Glass ceramic hob scrapers - how to use them and what are they for? Variants of types of scrapers for cleaning glass ceramics, which manufacturers are you hearing? How to choose a scraper?
GOST Brick: Solid Clay Ordinary Brick
Brick characteristics according to GOST. What is a solid clay brick? What advantages and disadvantages does it have? What is ordinary brick used for? What types of bricks are there?
How Many Bricks In 1 Cubic Meter M? 30 Photos What Is The Number Of Pieces In One Cube? M Of Masonry? Consumption Of Bricks Measuring 250x120x65 Mm
How much does the number of bricks differ in the same volume before and after laying? How many bricks in 1 cubic meter meter and how many pieces in one cube. m of masonry? How to buy brick and cement in optimal quantities and avoid surplus? How do brick sizes, placement methods and cement-to-sand ratios affect overall costs? What will be the consumption of bricks measuring 250x120x65 mm?
Brick M-150 (37 Photos): Characteristics Of Solid Ceramic Single Ordinary Brick, Standard Sizes M-150. What Does Brand Mean?
Brick M-150: basic manufacturing methods. Characteristics of solid ceramic single ordinary bricks. Where are M-150 bricks used? How does block M-150 differ from bricks of other brands?
White Sand-lime Brick: Standard Size, Dimensions Of An Ordinary Standard Brick In Centimeters
What is white sand-lime brick? What is the standard size? What are the dimensions of an ordinary standard brick in centimeters? How to choose this building material? Why is it good and what is bad?