Aerated Concrete Blocks (60 Photos): Pros And Cons Of Aerated Concrete Block, Characteristics Of An Autoclaved Aerated Block

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

The modern building materials market pleases consumers with its rich diversity. Relatively recently, aerated concrete began to be used in private construction. Blocks made from similar raw materials have many positive characteristics, for which many buyers choose them. Today we will take a closer look at this practical and popular material, and also find out what types of aerated concrete blocks can be found on the construction market.

Peculiarities

Modern consumers are faced with a huge selection of building materials for every wallet. Recently, block products are especially popular, which differ in pliability in work. Moreover, from such elements it is possible in a short time to build a full-fledged house with one or two floors.

From aerated concrete, reliable and durable dwellings are obtained, which it is quite possible to build with your own hands, without resorting to the services of specialists.

Aerated concrete means a stone of artificial origin, which is made of concrete with a cellular structure. Many consumers believe that aerated concrete blocks are analogous to foam blocks. In fact, this opinion is not correct. Gas blocks are completely different materials. In them, voids are formed in the course of chemical reactions that occur as the concrete hardens. Foam blocks, on the other hand, acquire a cellular structure due to the foam component added to the solution.

There are several types of aerated concrete blocks . You can choose the right products for a variety of purposes. It is worth noting here that not only country houses or small private structures are built from gas blocks. This material can be safely attributed to universal, since neat gazebos, original fences and even such non-standard items for building materials as garden beds are also made from it.

Pros and cons

Houses and cottages built of aerated concrete are found with enviable frequency today. The prevalence of such constructions is due to the fact that gas blocks have quite a lot of positive qualities, for which buyers choose them.

Let's take a look at the advantages of this material:

• One of the main advantages of aerated concrete is its optimal density. This parameter can be from 400 to 1200 kg / m3. If in construction work you use high-quality material with a low specific gravity, then it will take you little time to build this or that object.
• These materials are moisture resistant. Even if they are located in conditions of high humidity, their performance does not change significantly from this.
• Aerated concrete has another significant advantage, which is especially valuable for building materials - it is fire safety. Gas blocks are not flammable materials. Moreover, they do not support combustion.

• These materials are not afraid of low temperature indicators. Due to this quality that is relevant for our country, it is possible to turn to such blocks even if construction work is planned to be carried out in harsh climatic conditions.
• Aerated concrete is an unpretentious material that does not have to be regularly coated with antiseptic or any other protective compounds. No mold or rot appears on these blocks. In addition, they are completely uninteresting to insects and rodents. Not all building materials can boast of the same characteristics.
• If you have made a high-quality laying of aerated concrete blocks, then they will not create cold "bridges" at the joints, so the dwelling will not be able to leave the heat.
• Aerated concrete is a durable material. Constructions made from it can last for over a century.
• These types of blocks are safe from an environmental point of view. There are no dangerous and harmful compounds in their composition, so there is no need to worry about the health of the household. Experts say that only natural wood can compete with aerated concrete in environmental friendliness.

• Aerated concrete is distinguished by noise insulation properties. Thanks to them, annoying noise from the street is usually not heard in gas-block dwellings.
• Aerated concrete is also characterized by excellent thermal characteristics (no worse than brick). In some cases, houses made of this material may not be insulated at all.
• It is impossible not to mention that aerated concrete is a very durable and strong material. If you provide him with high-quality reinforcement, then you can safely proceed to the construction of buildings with several floors.
• Aerated concrete blocks are “docile” materials. If necessary, they can be cut or given a non-standard shape, as evidenced by many reviews of the masters.
• This product is also popular due to its affordable cost.
• In the production of such blocks, a very small amount of cement is spent.

• Aerated concrete blocks have a very modest weight, so it is not difficult to transfer them from place to place, as well as to carry out various construction work.
• As mentioned earlier, aerated concrete is a multitasking material from which it is not only possible to build houses, but also other useful objects such as fireplaces and gazebos.
• Aerated concrete dwellings or outbuildings are built very quickly, since such blocks are large in size and light in weight.
• Aerated concrete is distinguished by good characteristics of vapor and air permeability. Thanks to these features, natural air circulation is always present in living quarters, which forms the most comfortable microclimate of the home.
• Aerated concrete blocks are affordable materials that are manufactured using high-tech equipment. These materials are subject to strict quality control.

Aerated concrete blocks are not an ideal material. It has its own disadvantages.

Consider them:

• The main disadvantage of aerated concrete is its high hygroscopicity.
• For erections from this material, it is necessary to prepare the ideal foundation structures. The slightest mistake can lead to cracks appearing on the block walls, not only on the masonry lines, but also on the blocks themselves.
• Despite the fact that aerated concrete blocks are responsible for the formation of an optimal humidity level, over time, moisture begins to accumulate in their structure. As a result, this leads to their destruction.
• As mentioned earlier, the cost of such blocks is quite affordable, but the same foam blocks are still cheaper.

• These materials have thermal insulation characteristics, but they are not high enough. In this matter, gas blocks are ahead of many materials, for example, foam concrete.
• For these materials, you need to buy special fasteners.
• It is permissible to trim aerated concrete only with special materials designed specifically for blocks of this type.
• Buildings with more than 5 floors cannot be built from block aerated concrete.
• Aerated concrete blocks must be transported carefully so as not to damage them - the porous structure makes such materials more fragile.

Production technology

Aerated concrete blocks are manufactured as follows:

• First, a mixture is prepared, consisting of such components as Portland cement, quartz sand, water, lime and a special gas generator.
• The solution is placed in a special mold. In it, the swelling of the mixture is further carried out. As a result of this process, voids are formed in the concrete structure.
• When the block hardens, it is removed from the mold and cut according to the correct dimensional parameters.

This is how aerated concrete blocks of a certain shape are obtained.

There are two main ways to make these materials:

• autoclave;
• non-autoclave.

In order for aerated concrete to acquire high strength characteristics, the blocks are treated with water vapor, and then placed until completely dry in chambers that are in a special autoclave. This is how autoclaved aerated concrete blocks are obtained. Having passed such processing, they acquire more stable strength parameters.

Aerated concrete of non-autoclave type is cheaper than the autoclave version . A similar material is made by moisturizing and drying the material in natural conditions.

It should be noted that the formation of aerated concrete blocks from a hardened mixture is considered the main difference between aerated concrete and foam concrete known to all. This fact provokes fierce disputes among buyers, since the pores with such a manufacturing method still remain open.

Varieties

Nowadays, several types of aerated concrete blocks are produced. They differ from each other in the level of density and strength characteristics.

Let's get acquainted with a list of the most common and common types of such building materials:

• D350 . Blocks with such markings are less common than others. This fact is explained by the fact that these materials are quite fragile. It is recommended to install them only as sealing structures. Their strength level is only 0.7-1.0 MPa.
• D400 . Aerated concrete blocks with similar markings are durable and reliable. The strength parameters of these materials are usually 1-1.5 MPa. It is allowed to use these blocks both as heat-insulating bases and as openings in buildings with several floors.
• D600 . Thus, high-strength varieties of aerated concrete blocks are marked. Their strength parameters are 2, 4-2, 5 MPa. Due to its operational characteristics, such aerated concrete is often used in the design of buildings with ventilated facades.

Aerated concrete blocks can have various shapes, for example:

• rectangular - these specimens are used in the construction of load-bearing and partition walls;
• T-shaped - these blocks are used for the construction of floors;
• U-shaped - such materials are usually used in the design of window and door openings;
• arcuate.

In addition, aerated concrete block materials are:

• structural;
• heat insulating;
• structural and thermal insulation;
• universal;
• special.

Specifications

Aerated concrete blocks are available in various sizes:

• 600x300x200;
• 600x300x300;
• 400x300x300;
• 600x400x300;
• 400x400x300.

Knowing the dimensional parameters of these materials, you can easily calculate how much they will be needed to carry out certain construction work.

As for the density parameters, everything here depends on the specific brand of blocks:

• constructional options marked D1000-D1200 have a density of 1000-1200 kg / 1 m3;
• structural and heat-insulating parts of the D600-D900 brand are produced with a density of 500-900 kg / m3;
• thermal insulation materials of the D300-D500 brand have a density parameter from 300 to 500 kg / m3.

It should be noted that blocks of different densities can be distinguished by their appearance.

Aerated concrete parts are manufactured with different strength classes. This indicator demonstrates how much load this material can withstand. So, for example, a block of strength class B2.5 can be used in the construction of strong load-bearing walls, the height of which can reach a mark of 20 m.

There are also materials that have the following classes, indicating their strength:

• B1.5;
• B2.0;
• B2.5;
• B3.5.

Aerated concrete blocks can have a different coefficient of thermal conductivity.

This indicator is indicated as follows:

• 0, 096;
• 0, 12;
• 0, 14;
• 0, 17.

These parameters indicate the ability of a warmer space to transfer its heat to colder rooms. The higher the coefficient, the more noticeable is the heat output. To determine the material of the right coefficient for your dwelling, you need to consider the moisture level.

Another important parameter of aerated concrete blocks is their frost resistance . It is measured in cycles. For such building materials, the designations from 25 to 100 are used. For comparison, you can take a brick that can have no more than 50 frost resistance cycles.

When choosing such a material, it is important to take into account its shrinkage during drying. It should be no more than 0.5 m / m. If this parameter exceeds the specified mark, then you risk getting noticeable shrinkage cracks on aerated concrete walls. For this reason, experts strongly recommend buying materials that comply with GOST.

As for the weight m3 of aerated concrete blocks, it all depends on their direct marking:

• D300 - 300 kg;
• D400 - 400 kg;
• D500 - 500 kg;
• D600 - 600 kg;
• D700 - 700 kg;
• D800 - 800 g;
• D1000 - 1000 kg;
• D1100 - 1100 kg;
• D100 - 1200 kg.

How to avoid cracks?

As mentioned earlier, aerated concrete blocks are crack-prone materials. These defects can occur for various reasons, but most often the reason is a poorly executed foundation.

To avoid such problems, you should:

• equip the foundation of a slab or tape type, strictly adhering to the appropriate technology;
• carry out masonry, not forgetting about the arrangement of the reinforced belt;
• create ring straps.

If cracks do appear on the blocks, then do not be alarmed. This material can be restored. For this, a high-quality gypsum-based mixture is usually used.

Where can you use it?

Aerated concrete is a practical and demanded material. It can be used for a variety of purposes.

Not only private residential buildings are built from this material, but also household buildings . Also, aerated concrete is suitable for the construction of industrial and office buildings. However, it should be borne in mind that it is unlikely to be suitable for buildings with a large number of floors.

Due to their performance characteristics, aerated concrete blocks can be used in the construction of houses even in harsh climates. In addition, it is permissible to use this building material as structural, sound-insulating and heat-insulating bases. It is used in the construction of various walls. Reliable and strong external and internal walls are obtained from these types of blocks - they can be single, load-bearing, double or combined.

Blocks based on aerated concrete are perfect for installing dividing and fire partitions. These elements can be filled with frames made of steel or concrete.

Another area of application of aerated concrete blocks is rebuilding, as well as restoration of old structures . For the restoration of buildings that are already many years old, the gas block is suitable due to its low weight.

This building material is often used to soundproof or heat insulate a home. It is suitable for insulating both low-rise and high-rise buildings. To insulate a structure, special types of aerated concrete are usually used, which are small in size.

Aerated concrete is used in the arrangement of stair steps, floor slabs and lintels.

Recently, aerated concrete with a cellular structure has become often used in other areas. In this case, we are talking about the construction of basement walls or foundations. However, to justify the use of aerated concrete blocks, additional verification is usually required, aimed at identifying the reliability and durability of materials.

How to calculate the quantity?

Before you go shopping for aerated concrete blocks, you need to calculate how much you will need them. This is necessary so as not to buy too much excess material or to buy them in insufficient quantities.

To carry out the required calculations, the following formula should be used: (LxH-Spr) x1, 05xB = V, in which:

• L is the general parameter of the length of the gas-block walls;
• H is the average height of aerated concrete walls;
• Spp - designation of the total area of door and window openings;
• 1, 05 - this is the coefficient, taking into account a margin of 5% for trimming;
• B is the designation of the thickness parameter of the gas blocks;
• V is the volume of the required amount of aerated concrete.

If you rely on the above formula, you can create an understandable table for calculating the number of blocks in a cube.

Gas block sizes, mm	pieces in a cube
600×200×300	27, 8
600×250×50	133, 3
600×250×75	88, 9
600×250×100	66, 7
600×250×150	44, 4
600×250×200	33, 3
600×250×250	26, 7
600×250×300	22, 2
600×250×375	17, 8
600×250×400	16, 7
600×250×500	13, 3

But it must be borne in mind that such calculations give only approximate results, which are rather advisory in nature. Today, on the websites of various manufacturers, you can find convenient online calculators with which you can easily and quickly make all the required calculations.

How to lay?

If at least a month has passed after pouring the foundation, you should start waterproofing it. It is very important to carry out these works, since concrete does not tolerate contact with dampness and moisture.

The starting row of blocks must be laid out using concrete mixture as a binder . Keep in mind that the first laid parts will act as the basis for the future wall, so the materials should be installed as evenly and correctly as possible.

If during the installation of the first row you made mistakes, then over time, such block masonry can crack due to internal tension.

It is necessary to level the starting masonry using a special building level and a rubber hammer. Do not forget that the first block row must be reinforced. Subsequently, the installation of the bar should be done every 4 rows.

All the following rows must be laid using a special adhesive solution. Thanks to this technique, the seams are as thin as possible, due to which the finished wall will have more effective thermal qualities.

In order for the wall to end up as flat and neat as possible, it is necessary to use a detail such as a docking cord. After installation, the upper part of all rows must be treated with a special hand float (or other similar tool) in order to provide the materials with better adhesion properties.

The laying of aerated concrete blocks is completed with the arrangement of a reinforced belt. To do this, in the upper part, a formwork assembled from boards is fixed to the finished wall. Reinforcement is laid in it.

After that, concrete mortar must be poured into the formwork . Its proportions should be as follows: sand - 3 parts, cement - 1. Since the thermal conductivity of concrete is higher than that of aerated concrete blocks, this belt can not only strengthen the walls, but also cause heat losses in the interior of the premises. Because of this, it will need to be additionally insulated.

Currently, many manufacturers selling aerated concrete blocks supply ready-made rigid belts to the market. They are elongated blocks with a porous structure and a groove in the middle, into which concrete mortar must be poured.

We must not forget about the reinforcement of block masonry. To carry out these works, you will need not only an adhesive composition, but also reinforcement rods and a chasing cutter (you will need it when working with window and doorways of a building).

After completing the work on laying aerated concrete blocks, they should be trimmed. To do this, use a plane or a special grater.

Tips & Tricks

When laying aerated concrete blocks, it must be borne in mind that the parameter of the length of the horizontal joints should be approximately 2-8 mm. If we are talking about vertical seams, then their size should not exceed the 3 mm mark. If excess mortar appears from the seams, then they do not need to be rubbed - these elements must be removed with a trowel.

When doing work on laying aerated concrete blocks with your own hands, it is recommended to use homemade scaffolding . It will be much easier to work with them. Do not forget that the quality of the entire wall will depend on the laying of the starting block row. That is why it is so important to use a building level at the very beginning. If you notice certain inaccuracies, then they need to be eliminated as soon as possible, and only then proceed to the installation of the next row.

If you are working with aerated concrete blocks, then you should only use special fasteners. Simple self-tapping screws for such structures simply will not work - they will not hold securely and firmly in the blocks.

Please note that if the blocks contain parts such as gripper handles, then when installing them, the consumption of adhesive can significantly increase. The reason for this is that the technology for laying aerated concrete provides for the filling of absolutely all cavities in the course of work.

Transport aerated concrete blocks carefully so as not to damage their surface . It is recommended to cover this material with plastic wrap, which will protect them from negative external factors. If, in the course of laying window or doorways, you did not manage to get into the length of the whole aerated concrete block, then you can take a hacksaw or saw and cut off the excess part of the part. This work will not take much time and effort, since aerated concrete is a pliable material.

If you are going to use aerated concrete for the construction of a private house, then you need to be as responsible as possible in choosing a reliable and strong foundation. This is due to the fact that this material does not withstand the movement of the base. Because of this, the type of foundation should be chosen based on the characteristics of the soil and the characteristics of the gas block itself.

Experts advise against laying aerated concrete blocks, starting from two corners towards each other. As a result of such actions, it will be problematic for you to bandage the rows and adjust the finishing element to the required size. Before buying aerated concrete blocks, you need to carefully examine them. The materials should not show the slightest damage, chips or cracks. If you notice such, then it is better to refuse the purchase.

Don't look for too cheap stuff. An unexpectedly low price may indicate poor block quality.