2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10
Today, a wide range of modern materials is presented on the construction market, the use of which, due to their excellent physical and technical characteristics, contributes to a better and faster performance of all types of work - from installation to finishing.
One of these is adhesive mastic, without which the installation of stoves or fireplaces is currently indispensable . In this article we will tell you everything about this building material, define its features, varieties, popular brands, as well as areas of application.
Description
Adhesive mastic is a type of building material that belongs to the category of adhesives. This substance is characterized by excellent binding properties. It has certain characteristics and properties that are clearly spelled out in GOSTs and controlled by these regulatory documents.
According to GOST 24062-80 “Rubber adhesive mastics. Technical conditions”the material must have certain technical parameters.
- Connection strength - from 0, 12 MPa (kgf / cm²) to 0, 32 MPa (kgf / cm²). This parameter depends on the brand of mastic and the gluing time.
- Viscosity - 2-9 (20-90) P;
- Volatile components in the composition - no more than 45%;
- Water absorption - from 0.5 to 1%.
A material parameter such as density, measured in kg per m3 (kilogram per cubic meter), depends on the brand of the binder adhesive.
The adhesive mastic, the physical and technical parameters of which meet the standards, has a certificate of conformity. This document confirms its suitability for use.
The material has a number of advantages, among which it is worth noting:
- high strength;
- excellent adhesion to other materials, finishing and roofing;
- high coefficient of bio- and water resistance;
- resistance to temperature extremes;
- long service life - reliable manufacturers who produce high-quality material give a guarantee for at least 10 years;
- elasticity;
- high viscosity index - this allows the substance to be applied to any type of surface, thereby increasing the scope of its application.
Previously, for the manufacture of adhesive mastic, only the resin of the mastic tree was used. But such production is very time consuming and material, since the initial product - the resin of the rubber tree - was quite expensive. That is why more affordable raw materials are used in modern production for the manufacture of adhesive mastic:
- synthetic rubber;
- solvent;
- filler;
- polymer resins.
All these materials have excellent qualities and properties, so the adhesive made from them is practically in no way inferior to that made from natural rubber.
Species overview
There are many types of adhesive polymer resins that are used today for sealing window openings, flooring, laying tiles and simply for waterproofing. Absolutely all types of such mastic have high adhesive resistance and approximately the same composition. Let's take a closer look at the main types of substances.
Bituminous . Bitumen oil resin is a versatile product that is often used in the process of roofing, installation of vapor barrier and waterproofing material. It is heat and moisture resistant, viscous, elastic, durable and reliable. Consists of bituminous binder, antiseptic, herbicide and filler.
Shale sealing non-curing MSU . The composition includes petroleum products, polymer additives, plasticizers and fillers. It is used for sealing and sealing glass enclosures.
-
Refractory . The basis of the material is inorganic substances. Withstands very high temperatures, which is why refractory polymer resin is used in the process of insulating furnace installations and gas ducts.
Adhesive based on FAED . It is a heat-resistant adhesive mastic. This type of substance can be used in both acidic and alkaline environments.
There are other types of adhesive mastics on the market: waterproofing acrylic, butyl rubber, soundproofing, roofing.
Popular brands
Among the existing manufacturers of adhesive resins, it is worth noting:
- "Terracotta";
- Neomid Supercontact;
- Calorygeb;
- Tytan;
- Collafeu.
Each of the above brands guarantees high quality and long service life of their products, which, before entering the consumer market, undergo all the necessary laboratory tests, comply with norms and standards, and are certified.
Applications
Due to its excellent properties, high technical parameters and a variety of assortments, the scope of application of adhesive mastic is wide and varied.
It is in demand in the repair of flooring, for gluing roofing material or for waterproofing the roof.
For the device and decoration of stoves and fireplaces, both professionals and amateurs of repairs also choose mastic.
Most often, such an adhesive is used during installation:
- floor covering;
- finishing materials;
- wall elements;
- roofing.
For each type of construction work, there is a separate type of adhesive mastic, which has certain properties and characteristics . Its application makes it possible to reliably connect roll, tile, floor and roofing materials with any type of base. The main thing is to choose the right type of such a layer, and then a high-quality and reliable connection is guaranteed.
Recommended:
Heat-resistant Sealant: High-temperature Heat-resistant Option For Stoves, Fire-resistant Fire-resistant Compounds, Refractory Products For Fireplaces
The Russian market is filled with abundance of various brands of heat-resistant sealants that are used in various areas of household and industrial purposes. How to choose the right high-temperature heat-resistant option for sealing ovens? What is the best sealant to use to repair an automotive exhaust manifold?
Heat Resistant Metal Adhesive: High Temperature And Water Resistant, Heat Resistant At 300 And 1000 Degrees, Fire Resistant For Glass And Rubber
Heat-resistant glue for metal is widely used in industry and in everyday life. What to consider when choosing a high temperature and water resistant formulation? What technical characteristics should a heat-resistant adhesive capable of withstanding temperatures of 300 and 1000 degrees have?
Heat-resistant Adhesive: High-temperature Compound For Stoves And Fireplaces, Heat-resistant And Fire-resistant Adhesive For Glass And Tiles
Heat-resistant glue: features and varieties. What should be the high temperature composition for stoves and fireplaces? How to choose the right heat-resistant adhesive for home use?
Heat-resistant Film: Heat-resistant Fireproof Film For Kitchen, High-temperature Fireproof Film On Glass And Other Types
What is heat-resistant film, what are its features? What is special about heat-resistant refractory film for the kitchen? What are the varieties of this material, and what are their common uses?
Putty For Stoves And Fireplaces "Emelya": Refractory And Heat-resistant Putty, Heat-resistant Products Of The Brand
Putty for stoves and fireplaces "Emelya" is a refractory and heat-resistant putty, suitable for facing heating units. Heat-resistant products of the Concord OST brand are in great demand among customers. What are the features of the putty? What do they say about her?