How To Process Tomatoes With Furacilin? How To Dilute Furacilin For Spraying Tomatoes? How Can They Be Sprayed For Feeding And Treatment?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

The article briefly describes how to process tomatoes with furacilin. It is indicated how to dilute furacilin for spraying tomatoes. It is also necessary to clearly understand how they can be sprayed for feeding and treatment, how to do it correctly.

Processing features

The cultivation of vegetables can be disrupted not only due to bad weather, poor-quality agricultural technology and poor soil quality. Serious problems are often caused by pests of various types, diseases. To combat late blight, it is recommended to treat tomatoes with furacilin . This treatment should be done three times during the growing season. Failure to take into account the developmental features of the plant itself often turns into very unpleasant consequences.

How to dilute?

The recommended proportions very much depend on the purpose for which furatsilin is needed. So, in the fight against spotting, 10 tablets are dissolved in 10 liters of clean tap water. If a larger area is to be disinfected, then the amount of the drug and water is increased accordingly . Of course, it makes no sense to just throw a pharmacy medication into a bucket, basin, watering can or barrel. It should first be turned into a powder to ensure complete dissolution and no residues, and at the same time to speed up the process.

Powder preparation from tablets can be carried out in containers from:

• wood;
• ceramics;
• glass.

It is undesirable to use metal containers - often bad chemical reactions occur in them . The water should be warm, but not hot, and stir until final dilution. But preparing a solution is not so easy; such a concentrated billet has yet to be diluted in a 10-liter container. Chlorinated water can not be used categorically; it must be defended or rendered harmless by special additives. Then the prepared mixture is stored in a dark place with stable temperature conditions so that it remains usable throughout the season.

It should be noted that there is no reliable information on the use of furacilin against brown spot. But as for late blight and fungal rot, everything is clear - this drug will definitely not give a result with such lesions.

Recipes for feeding may be different, but in any case, the medication will suppress only a bacterial infection . Its fungal component (if we are talking about lesions mixed in composition) will remain - and will continue to destroy the plant.

How to use it correctly?

But still, for example, it is firmly decided to process tomatoes with furacilin solution. In this case, it is very important to apply it according to the rules, given the high toxicity of the drug. It is not recommended to exceed the standard concentrations (indicated above). Do not allow the solution prepared for spraying to be accessible to pets or children. The usual scheme says that the processing is carried out:

• strictly before flowering;
• then, with the obvious formation of the ovary;
• and last but not least at the end of the active horticultural season.

It is not difficult to define that “last moment”. The day begins to noticeably shorten, the sun is no longer so actively warming the soil. Theoretically, you can spray tomatoes over and over. But this will not bring any benefit and will not provide additional protection.

It is important to take precautions:

• ventilate the greenhouse immediately after processing;
• use a respirator, goggles, rubber gloves, tight clothing, rubber boots during work;
• after the completion of the procedure - thorough washing with soap;
• thoroughly washing the fruits from the treated plants before serving them;
• if possible - consultation with experienced agronomists.