When To Pour Boiling Water Over Currants? How To Pour It Over In Early Spring? Correct Watering. Why Treat Bushes? When To Spray Currants From Pests In The Moscow Region And The Ur

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

The need to find out how and when to spray currants from pests in the Moscow region and in the Urals, when to water it with boiling water, why, in general, to process the bushes, arises absolutely for all gardeners. This unpretentious shrub is very vulnerable to insect infestation, so the correct and timely application of insecticides is very important here. It is customary to pour over currants in early spring, having previously studied the features of the correct use of boiling water in the fight against a tick that infects plants.

The need for a procedure

Currant is one of the most popular shrubs grown in Russia. But she has specific pests that require special control measures. The currant kidney mite is miniature in size - its body length does not exceed 2 mm. But the damage done by this pest can be truly colossal. The parasite infects the buds of the plant, and then sucks out the juices from it during the entire growing season.

Even the highest quality care will not save currants from:

• yellowing of the leaves;
• stops in development;
• reducing fruiting;
• drying berries;
• the death of the entire bush.

It is impossible to fight the kidney mite with conventional insecticides . But it can be destroyed by dousing with hot water, carried out in the spring, before the sap flow begins. Such drastic measures will definitely be needed if signs of infection are already visible on the plant in the fall. They manifest as an unnatural enlargement of the kidneys. It is worth noting that this parasite can be found not only on all types of currants, but also on gooseberries.

Timely measures taken help to save the garden from total destruction . It is possible to scald currants with boiling water for prophylactic purposes, in order to prevent possible infection. If you ignore the signs of the appearance of parasites, the colony of ticks will begin to grow at a tremendous rate. Scalding helps to stop this process. The fact is that mites are sensitive to sudden changes in temperature, and for plants such "shock therapy" is a good way of hardening.

Treatment with boiling water is also effective against other pests. Among them are aphids, as well as pathogens of fungal infections, dangerous microorganisms. The treated shrub wakes up faster in spring, together gives young shoots.

Timing

It is necessary to process currants with boiling water, taking into account the regional characteristics of the growth of the shrub. The main reference point is the melting snow cover. Processing is carried out in early spring, when its height is reduced to 5-10 cm. The air temperature has little effect on the choice of time for scalding shrubs after winter, but you definitely should not be late.

The optimal month and term, taking into account the regional factor

1. March 10-15 - for spring processing of currants in Moscow and the Moscow region.
2. The first decade of April in Western and Eastern Siberia. In the Urals, you can also focus on these terms.
3. March 12-17 - for Vladimir, Yaroslavl, Tula regions. The same dates are applicable for the entire Central Region.
4. In the south, scalding of the bushes is performed in the first ten days of March. These terms are relevant both for the Astrakhan region and for the Krasnodar region.

It is important to know that boiling water treatment should be carried out exclusively in early spring, when there is a dense and tough crust on the kidneys that performs natural protective functions.

In the fall, it will not work to destroy pests in this way. And in late spring and summer, boiling water will do great harm to already blossoming leaves and actively growing shoots.

Watering methods

You also need to be able to properly pour boiling water over the bushes. If it is usually sufficient to spray the plants against disease, the kidney mites have to be handled differently. It is necessary to pour over the bushes from pests so as to accurately hit the buds, in which dangerous parasites are hiding . So you can process black, red and white currants of any varieties, including old plantings that are already heavily affected. To increase the effectiveness of the insecticidal effect, additional ingredients can be added to the composition.

Most often, summer residents use a solution with manganese, urea or copper sulfate . Sometimes a weak mixture of water and salt is prepared in a proportion of 5 g per bucket of boiling water. Such solutions do not lose their properties upon contact with hot water. Processing technology is also worth considering. It is recommended that the branches of the shrub be pulled together first, if thickened autumn buds are present on them, they are removed and burned.

The main procedure for scalding currants with boiling water looks like this

1. Trimming . It can be done in spring or autumn, in advance. It is important that the bush is sparse enough, free of dry or damaged branches.
2. Clearing the site at the processing site . It is necessary to remove the debris, clear the path.
3. Carrying out the necessary protective measures .
4. Preparation of boiling water or a special solution based on it . It is important that the hot water source is close enough to the currant bushes planted in a row.
5. Measure the temperature of the solution . By the time it hits the bushes, it should have indicators in the range of + 70-80 degrees Celsius. This is enough to kill insects, but not burn the bushes.
6. Steam treatment . The watering can should be held over the bush. Boiling water is supplied from the central part to the edges of the crown. The flow of water is held in one place for no more than 5 seconds. Consumption for 1 plant is about 3 liters of ready-made solution. A fully filled watering can is enough for 2-4 bushes.

In some cases, pure water vapor has to be served without the usual garden tools, supplemented with ingredients that enhance the effect. There are also alternative solutions for areas that do not have access to water in early spring.

With urea

Urea dissolved in hot water, when processing currants in spring, performs the function of foliar nitrogen feeding, stimulating the growth of green mass.

To prepare the mixture, the crystalline substance is first diluted in an amount of 700 g in 3 liters of hot, but not boiling water, adding 50 g of copper sulfate . Then the solution is topped up with boiling water to 10 liters.

In case of contact with vapors, it is important to take care of respiratory protection with a respirator.

Steam cleaner

If the site has access to the power supply system, modern technology can be used for steam treatment. The steam generator is filled with liquid, connected to the network. Then each bush is treated individually with a directed jet of steam. It is necessary to maintain the distance from the nozzle to the branches in the range of 30-50 mm.

A similar effect is provided by installing a bucket of hot water in the root zone - it will be enough to cover the bush with a film for 5 minutes for the treatment to be successful.

With potassium permanganate

For processing, a solution is prepared with several crystals of potassium permanganate per 10 liters of water. The liquid will turn out to be pink. This is a good solution if you need not only to remove the tick with hot steam, but also to disinfect the plants . The event can be combined with sanitary pruning of overwintered shrubs.

This method is very good for clearing an old garden as a disease prevention measure.

Burning

There is a "folk" method of combating a kidney mite on currants, which does not require the use of boiling water. To use it, you will need a portable gas burner. The processing procedure is carried out immediately after spring pruning, but before the start of sap flow. It is important that the bush is already thinned out. In this case, you do not need to link branches.

Firing is performed on all branches with buds, holding the burner 80-100 mm from the bark . All sections are passed 2-3 times. The surface of the bark becomes slightly smoked. The method is good because it is suitable for autumn use, while the rest of the exposure options are suitable only for spring.

In addition, a gas burner will correct the situation if there is no opportunity for boiling water on the site.

Useful Tips

Spraying with hot water is a serious task that requires careful preparation for the procedure. You should start by carefully planning the range of work. Since boiling water cools quickly in cold air, you will have to act without undue delay . It is worth taking care of protecting the root system from the harmful effects of hot water. As a safety measure, you can use the covering of the soil with boards, plywood sheets. In this way, the superficial root system can avoid damage.

The tool for work also needs to be chosen correctly . The best solution would be a classic metal watering can with a shallow divider. In a plastic container, boiling water will cool down too quickly. In addition, polymeric materials can deform from hot water.

Water for irrigation must be kept boiling throughout the entire procedure . It is worth using an outdoor potbelly stove, fire or stove. If there is a bathhouse on the territory, you can melt it by filling the storage tank, and then take water from it.

It is very important to irrigate the bushes evenly without delays of more than 5 seconds. It is necessary to pour water not on the soil, but directly on the shoots, where the pests are hiding.

Precautions won't hurt either . From boiling water, the metal from which the watering can is made will quickly heat up. It is important to take care of hand protection with thick gloves. The strainer attachment is also worth checking so that it cannot accidentally come off during the work process. It is better to protect your feet with rubber boots with a strong, thick sole, embossed enough to exclude slippage when moving around the site.