How To Set Up A Universal TV Remote? How To Connect And Bind The Remote Control To A New TV? How To Install And Activate On Another TV?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Manufacturers of modern multimedia devices produce remote control devices for controlling them from a short distance. Most often, any model of TV or video player is supplied with an original remote control suitable for it.

Remote control is convenient because a person does not need to make unnecessary gestures in order to activate or deactivate certain options of the technique. Sometimes such remotes in one room can accumulate several pieces, and in order not to get confused in their use, you can purchase one universal model that will combine the control of several devices. To activate the remote control and "tie" to the equipment, it must be configured or programmed beforehand.

Difference between original and universal remote

Any remote control device is used to implement the capabilities of a technical device. Distinguish between original models - that is, those that come off the assembly line with the multimedia device, as well as universal remotes , which are designed in such a way that they can be programmed to synchronize with many models of equipment released by various world manufacturers. Sometimes it happens that the original remote control is lost or for some reason is out of order.

If the model of the TV or other equipment is already old, then it is simply impossible to find a replacement for the same original remote control

In such cases, the task of remote control can be taken over by a universal device.

The pulsed emissions of universal consoles are such that they are suitable for controlling many models of both modern technology and devices of the old generation . In addition, the universal device has a feature - it can be configured to be sensitive to several devices at once , and then the extra remotes can be removed and only one can be used, which, you see, is very convenient.

Most often universal remote control devices come to us from factories in China , while the birthplace of the original remote control depends on the manufacturer of the multimedia device to which it is attached, which means it matches the brand and has a higher degree of quality. Another feature of universal controls is that they are less expensive. If you wish, you can choose them by color, shape, design. Each such remote control contains a software encoding base, due to which it is synchronized with most models of multimedia equipment.

How do I find my TV code?

Before proceeding to activate the universal remote control, you will need to know the code for your TV. Some models have a three-digit code, but there are those that work with a four-digit code . You can clarify this information, carefully studying the instruction manual supplied with your TV model. If there are no instructions, special reference tables will help you, which can be found on the Internet by typing the phrase "Codes for setting up the remote control" into the search engine.

For the operation of a remote control device and for connecting several devices through it, the program code performs the main function.

It is with the help of the code that the recognition, synchronization and operation of all devices that you plan to control using the remote control take place. A code should be understood as a specific set of numbers that is unique. Search and code entry can be performed both automatically and manually. If you dial a certain order of numbers on the universal remote control, then the automatic search and selection option will be launched. For various TVs, their own unique codes have been developed, but there are also common ones, for example, the following:

• to turn on the device use code 000;
• channel search by moving forward is carried out through 001;
• if you want to go back one channel, then use code 010;
• you can add the sound level code 011 , and decrease - code 100 .

Actually, There are quite a few codes, and you can see for yourself by studying the tables with them . It should be noted that in original control devices the code system cannot be changed. It has already been entered by the manufacturer and is suitable for the multimedia device to which the remote control is supplied. Universal consoles are arranged differently - they can be customized for any type of equipment, since their built-in code base is much larger and more diverse, which gives this device the opportunity for widespread use.

Customization

To connect and configure a multifunctional Chinese remote control, first of all, you need to charge it - that is, connect the power connector to the desired type of battery. Most often AAA or AA batteries are suitable.

Sometimes these batteries are replaced with batteries of the same size, which is much more profitable, since it involves reusability, because the batteries can be recharged through an electrical outlet.

After recharging the remote control is completed, you can start synchronizing it with the equipment . The universal version of the remote control without settings will not function, but they can be performed in manual or automatic mode.

Automatically

The general principle of setting up the universal control panel has approximately the same algorithm of actions, suitable for most devices:

• turn on the TV to the mains;
• direct the remote control to the TV screen;
• find the POWER button on the remote control and hold it down for at least 6 seconds;
• the volume control option appears on the TV screen, at this time the POWER button is pressed again.

After this procedure, the universal remote control is ready for use. You can check the functionality of the remote control after activating it in the following way:

• turn on the TV and direct the remote control to it;
• on the remote control, dial 4 times the number "9", while the finger does not remove from this button after pressing, leaving it for 5-6 seconds.

If the manipulation was performed correctly, the TV will turn off. On the sales market, most often there are models of remote controls, the manufacturers of which are Supra, DEXP, Huayu, Gal. The tuning algorithm for these models has its own nuances.

Supra Remote - point the remote control at the screen of the turned on TV and press the POWER button, holding it for 6 seconds until the option for adjusting the sound level appears on the screen.

Gal remote - turn on the TV and point the remote control at it, while on the remote you need to press the button with the image of the type of multimedia device that you are currently configuring. When the indicator is on, the button can be released. Then they press the power button, at this time an automatic code search will start. But as soon as the TV turns off, immediately quickly press the button with the letters OK, which will make it possible to write the code into the remote control memory.

Huayu Remote - point the remote control at the turned on TV, press the SET button and hold it. At this time, the indicator will light, on the screen you will see the option to adjust the volume. By adjusting this option, you need to set the required commands. And to exit this mode, press SET again.

DEXP remote - point the remote control at the turned on TV screen and at this time activate by pressing the button with the brand of your TV receiver. Then press the SET button and hold it until the indicator turns on. Then you need to use the channel search button. When the indicator turns off, immediately press the OK button to save the automatically found code.

Often, for various reasons, it happens that an automatic code search does not bring the desired results. In this case, the settings are made manually.

Manually

Manual synchronization can be performed when the activation codes are known to you, or in the case when the remote control failed to set up in automatic mode. The codes for manual tuning are selected in the technical data sheet of the device or in special tables created for your brand of TV. The sequence of actions in this case will be as follows:

• turn on the TV and point the remote control at its screen;
• press the POWER button and at the same time dial the previously prepared code;
• wait until the indicator lights up and pulses twice, while the POWER button is not released;
• check the operation of the main buttons of the remote control by activating their functions on the TV.

If, after setting up on the TV with the help of a “foreign” remote control device, not all options were activated, then you will need to separately find and activate the codes for them. The algorithm for setting up remote devices of various well-known brands will differ in each specific case.

Manual configuration of the Huayu remote control - turn on the TV and point the remote control at it. Press and hold the POWER button and the SET button at the same time. At this time, the indicator will begin to pulsate. Now you need to enter the code that matches your TV. After that, the indicator turns off, then press the SET button.

Setting up your Supra remote control - turn on the TV and point the remote control at the screen. Press the POWER button and at the same time enter the code that matches your TV. After the light pulsation of the indicator, the POWER button is released - the code has been entered.

The code is entered in the same way into remote devices of other manufacturers. All remotes, even if they look different, have the same technical structure inside.

Sometimes, even on more modern models, you can find the appearance of new buttons, but the essence of the remote control remains unchanged

In addition, it is worth noting that in the last few years smartphones have begun to be produced, which also have a built-in remote control, with which you can control not only the TV, but also, for example, turn on the air conditioner. This control option is universal, and the devices are synchronized in it via the Bluetooth built into the smartphone or the Wi-Fi module.

How to program?

A remote control (RC) in a universal design can adapt and replace several original remotes that are suitable only for one specific device. Of course, this is only possible if you reconfigure the new remote control and enter codes that will be universal for all devices.

Besides, any universal remote control has the ability to memorize those devices that have already been connected at least once … This allows it to be made with a wide memory base, while the original devices have a mini-memory format. But the same remote device can be installed on another device, you just need to enter the appropriate control codes.

The programming instructions for the universal control device of almost any model informs that you can activate the memorization of the entered codes by pressing the POWER and SET buttons.

After performing this action, the indicator on the remote control will be activated, it will pulsate . At this time, you need to select the button that corresponds to the device with which you synchronize the remote control. The programming must be completed by entering the appropriate code, which we take from the technical passport or tables in the open Internet access.

After entering the code, you will have the opportunity not only to control each device separately, but also to switch from one device to another using the remote control . Software coding methods can sometimes have some peculiarities, which you can clarify by studying the instructions for your remote control device. However, all modern remotes have a clear graphical interface, so device management does not cause great difficulties for a simple user.