Borage From Polycarbonate (18 Photos): How To Make A Greenhouse For Cucumbers "Butterfly" And "Bread Box" With Your Own Hands? Cucumber Mini Greenhouses

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Many gardeners build small greenhouses in their summer cottages for planting vegetables and herbs in spring. Such structures allow you to protect plants from adverse external influences, as well as grow crops in the most suitable conditions. Today we will talk about how you can make a polycarbonate greenhouse for cucumbers with your own hands.

Peculiarities

The polycarbonate borage is an arched design. It includes the foundation, right and left parts . The hinge parts allow for up and down movement of the flaps. This makes it possible to control the microclimate inside such a garden structure.

But most often greenhouses for cucumbers are made in such a way that the design is with one-sided opening. In this case, the entire sash opens upwards. In this case, the hinges are only fixed at the bottom on one side . For the installation of the frame, as a rule, a sturdy wooden beam is used. In this case, he must have a cut on the front side.

Views

Borage made from polycarbonate comes in a variety of designs. The most common options include the following models.

" Breadbasket ". This design looks like an arched greenhouse. It will be completely closed. In this case, one of the sides with special hinges must be able to open so that the user has access to the plants. The roof is thrown "the other way around", which leaves small gaps that serve as a ventilation system.

The hardest parts of this design are the side compartments . For their production, a pipe bender is often used. In this case, neither welding nor a lathe is required. The side sections are connected to each other using a profile pipe. The base can also be made of metal. At the end, the entire structure is sheathed with polycarbonate sheets.

Such designs can be presented in the form of mini-borage.

" Butterfly ". This option is also quite common among summer residents. The type of greenhouses "Butterfly" is universal. It can be located both in large areas and in small gardens. The construction is done with a roof that opens to both sides at the sides. This allows you to control the temperature regime inside the building.

As a rule, such structures are created from a lightweight metal profile and transparent polycarbonate sheets. Wooden frames can also be used.

Step-by-step instructions for creating

There is a wide variety of detailed schemes for the manufacture of polycarbonate cucumber greenhouses. If you need to make a greenhouse for growing vegetables with your own hands, then you should adhere to some manufacturing rules and a certain sequence of construction stages.

Base

For homemade borage, the foundation can be built from a metal or wooden base . The first option is most often accompanied by pouring concrete mass, while pouring is carried out to a depth below the level of soil freezing.

When constructing a foundation of wooden elements, many manage by pouring concrete into wood posts . Metal pipes can also be concreted. Cement, fine sand and gravel should be used to make a suitable mixture (broken stones and bricks can be used instead).

It is better to cover the foundation of the future greenhouse on both sides with manure, dried herbs, straw. The organic material will rot and generate heat, which will create a natural heating of the soil.

Frame

The frame department is assembled in separate parts, which will then be connected to each other. To create the main part, you need metal profiles. They must first be cut according to the design dimensions using a grinder.

To create a greenhouse, parts with a size of 42 or 50 mm are suitable.

For the correct creation of a frame structure, it is better to refer to a ready-made scheme . All individual parts are fastened with self-tapping screws. All horizontal parts are pulled together by cross members for greater strength and rigidity of the structure.

So that the frame does not deform in the future, does not break, you can additionally strengthen all the corners. To do this, make a beveled bar from the remaining scraps of a metal profile.

If a standard simple manufacturing scheme was chosen, then in the end you should get 5 identical flat metal blanks . And also it is necessary to make 2 more blanks, which will act as end sections.

When all parts of the frame are completely ready, they are attached to the foundation. Fixation takes place with metal corners. Then all this is pulled together by transverse strips at the junction of the roof and walls.

Finishing

After the complete assembly of the frame and its attachment to the base of the future greenhouse, you can start finishing. To do this, take transparent polycarbonate sheets. To work with such material, it is better to use a simple screwdriver . All self-tapping screws must have a special thermal washer. Otherwise, the polycarbonate may burst during drilling or use.

Polycarbonate sheets are cut in accordance with the dimensions of the frame part of the greenhouse . If the site is located in a region subject to heavy snowfalls, then in this case it is better to use wooden blanks - thin profile metal is unlikely to be able to withstand high loads due to snow masses. It just deforms.

For the construction of greenhouses, it is recommended to purchase special polycarbonate sheets that are protected from ultraviolet radiation. Such a base will retain heat for much longer, while at the same time protecting young plants from overheating.