Pool Rubber Paint: A Review Of The Best Pool Rubber Paint

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Before deciding to build a pool on your site, you need to think about the high-quality finish of the bowl, since it will often come into contact with water. One of the modern types of finishing materials is rubber paint. You should be aware of the basic properties of this product.

Characteristics

Having built a pool bowl (concrete or metal), having carried out good waterproofing, the next step will be to treat the surface by applying rubber paint. Before purchasing products of a particular brand, you need to familiarize yourself with all its features and composition.

Rubber paint is the newest type of water-based acrylic paints and varnishes. It is eco-friendly, harmless to health, breathable, with a soft flexible texture, suitable for any outdoor and indoor work. All the components that make up such a mixture do not pose any harm to nature, since they do not emit hazardous substances either during application or use.

This water-resistant substance creates a very dense coating, soft and pleasant to the touch, and reliably protects the surface of the tank. The product includes:

• water (serves for dissolution, does not exceed 5% of the total mass);
• acrylic latex (essential for high stability and flexibility);
• coalescent (film forming component);
• antifreeze (protects the finished coating from the effects of subzero temperatures);
• preservative (affects the life of the paint);
• additives, pigments, fillers (to improve the properties and give color to the finished product).

Pros and cons

Modern rubber pool paints have their own advantages and disadvantages. Main pluses:

• high quality and durability of the material (service guarantee for about 10 years without abrasion and surface cracking);
• flexibility of the coating;
• resistance to temperature fluctuations (does not change its properties either at high or at low rates);
• moisture resistance (a layer of paint perfectly protects the surface from the consequences of frequent contact with water);
• safety (there are no harmful emissions and a pungent smell);
• ease of application;
• affordability;
• resistance to sunlight (does not lose color under the influence of ultraviolet radiation);
• anti-slip surface (which is very important for the pool);
• fast drying (within a few hours).

The only drawback of such a product is a more scrupulous surface preparation in compliance with all the rules (in order to avoid further peeling of the paint).

Manufacturers

Buying rubber pool paint is much cheaper than buying tiles for finishing a bowl, while the paint is not inferior to tiles in all respects. Currently, such a paint and varnish product can be purchased from various manufacturers. Consider the best manufacturers of these products.

DALI

According to experts, DALI products are considered the best among a similar product category. The paint is used for application on a wooden surface, tiled, on slate, as well as on galvanized and iron. The positive aspects of the products of this brand are:

• economical consumption;
• suitable for outdoor and indoor use;
• cracks up to 3 mm can be covered;
• can be used in new homes that are shrinking;
• increased noise insulation.

The disadvantages are the following factors:

• can be used only from + 10 °;
• cannot be diluted;
• high price;
• 2 coats are required.

SherLastic Elastomeric

The American manufacturer manufactures products that can be applied to concrete, brick and plaster surfaces. The advantages of this finishing material:

• high hiding power with small volumes of paint for a large surface area;
• there is no chemical smell;
• easily masks small cracks;
• applied, forming a minimum of drips;
• heat resistant.

Negative sides:

• sold only in large containers of 19 liters;
• high price;
• long drying interval between layers: 24 hours;
• intended exclusively for outdoor use;
• time-consuming in the tinting process.

Super decor rubber

The Finnish manufacturer recommends applying its products to wooden, galvanized, any metal, plastic, gypsum, concrete and brick surfaces. Advantages of paint:

• does not interfere with the passage of steam;
• surface washing is allowed;
• resistant to cracks and impacts of the base;
• there is no smell;
• the ability to use indoors and outdoors.

Super Décor Rubber brand products also have some disadvantages, namely:

• one layer is not enough for reliability;
• high price;
• need tinting.

How to apply?

Before starting to paint, you must carefully prepare the surface of the pool bowl. The work is done as follows:

• prime the bottom and sides of the structure and wait at least 8 hours until completely dry;
• clean the surface from all existing contaminants;
• shake up the paint thoroughly before starting work, leaving no lumps;
• if the mixture is too thick, you can add a little water;
• apply the first layer with a brush or roller strictly on a dry surface, be sure to wait until it dries;
• in the process of work, the paint must be stirred frequently;
• apply a second coat to the dried surface of the first coat;
• after painting, thoroughly wash the working tools.

It is not recommended to be limited to staining only. For greater durability of the coating, it is necessary to occasionally carry out preventive actions. In this case, it is enough:

• remove the appeared rust;
• use a sealant if necessary;
• paint periodically.

It is undesirable to wash the pool surface within 7 days after applying the paint. This rule must be adhered to in order for the applied material to finally gain its strong properties.

The finished pool bowl can be washed with soapy water and treated with a disinfectant.