LED Surface-mounted Luminaires (53 Photos): Round And Square LED Models For Indoor Lighting, Linear White And Black

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Overhead LED devices today are very popular devices with most people and are used both in private houses and apartments, and in any administrative buildings and company offices. This demand is substantiated by an abundance of advantages: low cost, ease of installation, ease of maintenance. In addition, such lamps have a long service life, and the consumed amount of energy is much less than with the action of other types of bulbs.

What?

Stylish overhead models of LED devices (lamps) today cannot be replaced by anything in rooms with popular options for suspended ceilings. In these overhead products in office offices, LED sources of light flux are directly involved, developed according to the latest technologies, which guarantees their high luminous efficiency, duration of operation, constancy of light quality, as well as convenience and comfort in operation.

The considered type of devices has the following distinctive characteristics:

• For equipping any room with these overhead luminaire models, there is no need to specifically define and prepare seats in advance. Thus, installation takes a minimum of time;
• Ceiling lighting of the specified type refers to quite economical, since in this case, ten times less electricity is consumed, as opposed to standard lighting products. Consequently, the pricing policy fully justifies itself;

• The service life of the LED device is at least twenty years. Thus, there is no need to frequently change the components of the light source or carry out its complete replacement;
• These devices provide a uniform glow over the entire available area of the office or other room, while creating a truly comfortable environment.

Installation of these products can be carried out on any desired or available support base.

Therefore, if the room has not been renovated for a long time, it is recommended to use LED models.

Pros and cons

Consider the positive and negative aspects of LED surface-mounted luminaires.

The pluses include the following:

• Long service life;
• Average level of electricity consumption with a significant indicator of emitted light;
• LED lighting devices work perfectly both from the electrical network and autonomously, that is, directly from the power supply. This advantage is especially relevant in case of a sudden power outage;
• The opportunity to show your imagination in choosing colors, shapes, future location and the required number of lighting units in the interior of an apartment or house.

With all the significance of these positive aspects of overhead LED lighting devices, there is a significant drawback - the high cost of the product and a decrease in the proper quality of light after a certain period of time. After a couple of years, the light from the lighting devices turns dim compared to what it was in the beginning. When purchasing an invoice LED lighting fixture, do not overlook the warranty card - it must certainly be issued for a period of 5 years. The light flux is usually narrowly focused. If the room is spacious enough and you do not want to install another ceiling lighting fixture, then it may be necessary for a larger number of overhead products or additional light sources.

The device of diode lamps

Before you start fixing the overhead ceiling accessory, you need to understand how it works:

• The light bulb itself has a number of LEDs. The luminous intensity depends on the number of LEDs in question. One lamp contains from one to several dozen LEDs.
• LED components cannot work on their own, they are connected in a single circuit. In turn, the LED string is connected directly to the power supply.
• A very important component of the design is the reducer, which is necessary to remove the heat that is released and concentrated in the lamp.

Consideration should be given to attaching the LED parts to the luminaire. The easiest way to install this luminaire is to purchase it already connected, but it is possible to do it yourself. In this case, you need to understand the options for implementing the assembly and the connection itself:

• Serial connection . It is used most often, especially when connecting luminaires in industrial premises;
• Parallel connection . Resistors are alternately connected to each bulb;
• Mixed connection . It is often used for installation both in office premises and at home.

Views

There are the following types of LED overhead products.

Ceiling . The considered version of the products is considered the most famous and is used to form the main lighting in an apartment or house. Ceiling lamps are traditionally endowed with overall dimensions. Using these lamps, you can implement a truly amazing and unique solution.

Embedded . It is worth noting the recessed lamps used to highlight the desired areas or objects in the interior. In most cases, the types of lighting devices under consideration are used directly to focus attention on expensive and especially important interior items. Thanks to the use of these products, the room is distinguished by originality and unsurpassed design solutions. However, it is worth noting that it is not so easy to install them, so for this work it is worth using the services of professionals who perfectly know the main techniques for the embodiment of ideal and high-quality backlighting.

Basically, recessed models are chosen for stretch or false ceilings. They must be suitable for such designs in all dimensions. In this situation, it is also recommended to use lamps that have interesting colors. It is important to note that the lighting products in question can be easily built into even interior items. In most cases, they are used to implement TV backlighting or sliding wardrobes, in addition, they are perfectly used for installation inside any lockers.

Thanks to the above, any darkened place can be perfectly illuminated if desired.

Furniture . Such products are traditionally produced in small sizes, but their installation is considered quite laborious. This is due to the fact that it is necessary to extremely accurately and correctly lead the electrical wiring to a certain piece of furniture. This must be done in such a way that no wires or other details of the "filling" are visible. Also, for the installation of the type of device under consideration, it is necessary to make a special hole in the furniture, which must have the required dimensional indicators. To do this, you should use special details, because, performing the conceived solution differently, you can spoil the interior object or remain dissatisfied with the final result of the work.

Office . It is worthwhile to include in a separate group special models of office lamps that are used only in commercial real estate. They are distinguished by the fact that they are endowed with special sizes and appearance. They have high productivity, the production of such devices is carried out only in white. It is quite easy to install them. Such devices can be used not only to organize general lighting in the room, but also to illuminate the workplace of absolutely every employee of the organization. To create lighting in the office, lamps are produced in various sizes, thus, the subjective choice of these devices is completely dependent on the nuances of the room itself. Installation of these lamps should be done exclusively by specialists, since the comfort and safety of future lighting depends on the result obtained. Luminaires for an office must have a clear list of parameters suitable only for them, since it is very important that they comply with all specified requirements and generally recognized lighting standards directly in working conditions.

Surface mounted LED luminaires are the ideal solution for any type of space (residential, office, public). It is easy to install lighting devices, and if necessary, you can simply replace the location of the device, because it can be easily and very quickly dismantled or moved to a new location. It is worth noting that, like all lighting devices that are created using LEDs, the products in question stand out with a significantly low level of electrical energy consumption, which guarantees significant savings in payments for used electricity. This explains the obvious and deserved popularity of such products among most people. Manufacturing companies additionally offer the following types: linear, rectilinear, double, breaking, thin, narrow, with a motion sensor, battery-powered, waterproof, with a switch, with a remote control.

Forms

The classification is made, first of all, on the basis of the structural differences between the shade and the fastening component. The lamps under consideration can be of the following shape: circular, square, rectangular, triangular, convex, angular, flat, long, narrow, and also resemble a glass or be made like a pill, a tablet. The specified division does not have a particular effect on the area of direct application, however, the round design is most often used. Square shapes are presented in two versions: compact and made in the form of panels.

The last of the named versions are more often used to organize the light flux in the offices of companies.

Dimensions (edit)

To implement the lighting of huge rooms, devices that are standard in terms of size indicators are used, which give a large diffused stream of light. Models of various sizes are endowed with an ergonomic design, so it is recommended to choose products that are suitable for absolutely any style of interior, as well as organically looking both in family settings and in public institutions. To focus attention on a specific area or object, an overhead spotlight is installed directly above it. It is endowed with small dimensions and direction of light flow, and can also be installed on various surfaces: walls, ceilings or furniture. For use as the main stream of light in a room, a device with a large number of spotlights is useful. They are produced both from different materials and with different decorative finishes, and in a variety of dimensions (large or small).

Often, such products are additionally equipped with a swivel mechanism for a comfortable direction of the light beam.

Materials (edit)

Surface-mounted or wall-ceiling models of LED lighting devices can boast of the originality of the design and the uniqueness of the material used. They are allowed to be installed both directly on the ceilings and on the walls. There are models with an already added number of diodes, and there are also those where the bulbs are replaced as needed. Consequently, the material and external design of overhead models is much more attractive and attractive than inset models. Material, color palette, shape, method of execution, do not have any restrictions or frames.

Manufacturing companies produce unique iron, glass, plastic, plaster, bronze and combined LED lighting devices.

Colors

The color palette of the lamps under consideration pleasantly surprises with a variety of proposals: delicate snow-white and soft pastel colors, rich dark (chocolate, black, bronze) or bright shades (lemon, mint) with the addition of rhinestones and the like. Manufacturers confidently declare that any buyer can easily choose the desired color, since the presented range of shades will satisfy the preferences and wishes of even the most demanding client.

Styles

The design of the body of LED lighting fixtures is truly winning and laconic. Refined classic models without additional frills are offered, as well as products with an overly decorated outer case in the style of techno and others. Such a lamp will organically fit into absolutely any desired interior of an apartment or house, be it classic or minimalism, Provence or Empire style, and so on.

Application options for LED models

The use of LED luminaire variations is best known for their operational benefits. They are ideal for controlling lighting in large industrial and commercial premises. Such lamps have shown themselves to be excellent in daily use in offices and residential buildings. The location is selected depending on the size of the model and its desired design.

As an excellent way to use LED models, it is recommended to use them for indoor lighting, for a house staircase, a wardrobe.

Beautiful interiors

• For the bedroom . It is worth remembering that in order to create the main light, such a lamp should by no means be installed, especially in a small bedroom. If the area is spacious, it is allowed to mount 2-3 small lamps as an additional light source.
• Living room . Here you need to build on the style of the interior: they will fit perfectly into the high-tech style, but they will definitely not fit for the classics.

Kitchen . The place for the ceiling lamp is directly in the dining area, but for the worker it is better to use it as an additional light to illuminate the cooking area.

• Bathroom . It is also allowed to use LED light in this room, taking into account the interior design.
• Office . The models stand out for their restrained appearance and are distinguished by optimal size indicators. The main emphasis in these panels is made on high productivity and laconic design.

You can find out how to install a LED ceiling light by watching the video below.