Diy Step Stool: How To Make It Out Of Wood According To Dimensional Drawings?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

There is a stool in almost every home. It is used both for household purposes and simply as a chair. It's compact, robust, and easy to carry wherever you want. But the most popular stools are those that in parallel act as a stepladder. Stores provide a wide range of such furniture. A do-it-yourself step-stool is also made. If desired, anyone can independently make such a furniture attribute, for this it is enough to follow the exact instructions.

What materials to use?

The first step is to prepare the necessary set of tools and materials. Then it is important to study the drawings of such a product, and then proceed to the direct production process. Of the tools you will need:

• chisel;
• electric jigsaw;
• a machine that performs grinding;
• drill;
• a hammer.

From materials:

• self-tapping screws;
• durable plywood;
• board.

If you study the recommendations of a specialist well, then you can make such an object out of wood very quickly. You should first prepare the material from which it will be produced. If there is not enough money to buy new raw materials, old frames that were used as a window will do.

The main thing is to first shake them off . Experienced craftsmen advise using just such a material, the thing is that it is highly durable and reliable. The ladder stool performs many functions at the same time; it is used not only as a chair, but also as a ladder. therefore it must be able to withstand a heavy load in weight.

The ladder stool performs many functions at the same time; it is used not only as a chair, but also as a ladder. Therefore, it has to withstand a heavy load in weight.

Before using the board, it must be carefully inspected. It shouldn't be too dry … It is necessary to make sure that a layer of coating that protects the wood from negative influences is still present on the surface of the board. For instance, using side boards from a window sash can be hazardous . This is due to the fact that they dry out first and quickly become unusable.

Where to begin?

After the necessary tools and materials are prepared, you can proceed to the direct production of furniture. Manufacturing begins with the construction of the seat. It is for this part of the stool that they are guided by the production of all other parts.

The height of the seat should be more than 2 cm, the width depends on the body weight and size of the person who will sit on such a chair in the future. Experts advise focusing on the minimum dimensions of 350 * 350 millimeters.

The length of the thrust part of the structure also depends on the size of the ladder, but usually it varies within half a meter. One pair of legs is always shorter than the other. Here you need to understand that they must be high enough to support the weight of the person and properly rest against the surface.

After the seat and legs are made, it is necessary to attach the latter to the seat itself. This is done manually.

Making steps

A wooden step is made according to the same principle as the rest of the stool. A reliable material is selected, which is pre-processed with a grinder. In that pair of legs, which is shorter, special holes with a diameter of 12 millimeters are made. And already in these holes, rods are inserted, which ensure the process of rotation of the entire structure.

Self-tapping screws are used to secure the rod. It is important to make sure that the center of each screw is at the same level from the chair legs.

It must be remembered that ladder stool is always characterized by the highest possible stability . To meet this requirement, you must first drill, and then attach an additional strip. It attaches from the middle of the stool to the bottom edge.

To make this piece of furniture look attractive, the head of the screw is glued with glue, and then cut off with a hacksaw.

Expert advice

A stool that simultaneously serves as a ladder can be of several types. By completing all the points of the scheme, you can independently produce such a piece of furniture. It is very simple to check the reliability of the structure, it is enough to turn the chair 180 degrees, as a result of which a stepladder should turn out.

A properly made ladder chair takes up little space and can be easily moved from one place to another. She may be:

• stationary;
• folding;
• transform.

These properties provide the versatility of the product.

A folding chair is best used when it comes to small living space . You don't need a lot of storage space.

The product, which is easily transformed, is easy to use. With a slight movement of the hand, an ordinary stool quickly turns into a step-ladder.

But in a stationary chair, which is equipped with a ladder, the legs are located at a strong slope. They are equipped with parts that are installed crosswise, each of these slats is used as a step.

By looking at the diagrams by which these products are manufactured, you can find out in more detail all the features of production.

Description of the circuit

First you need to install the product in such a way that the legs that are on the edge always rest against the floor at an angle of 90 degrees. But those that are longer, at an angle of 70 to 80 degrees. It is also important to check that the base is firmly on the floor.

The legs, which are longer, must be connected to each other with special pieces of wood, at least three. The result is a staircase. Sometimes, instead of nails, pieces of wood are attached to the holes with glue. If you choose good quality glue, then the strength of the structure will not suffer.

After that, the planks are attached to the shorter legs. One is attached at the bottom and top, and the third is placed diagonally.

To make the structure even more reliable, the supporting parts (large and small) are connected on both sides with a transverse board.