Projects Of Baths From Foam Blocks (52 Photos): How To Build With Your Own Hands A House With A 6x4 Pool From A Foam Block

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

A bathhouse can only be made of wood - many are convinced. This opinion has every right to exist, but one should not deny the fact that traditional materials for the construction of such structures have an alternative in the form of artificial analogs.

Modern building materials prove their effectiveness in terms of properties, ease of use during installation, and price. The same wood or brick for the construction of baths today is successfully replaced, for example, foam blocks.

Peculiarities

One of the interesting qualities of foam blocks is their resistance to fire. In many ways, it is this that makes them suitable for construction in this case. But this material has its advantages and disadvantages, which must be taken into account when taking it into service:

• In terms of thermal protection, foam blocks are three times better than the usual brick. Stable at high temperatures.
• They are environmentally friendly. Do not rot. Rodents show no interest in them.
• They do not require treatment with antiseptic and anti-flammable agents.
• They are relatively lightweight and easy to saw, which makes them convenient for construction.
• They require small financial costs for the construction of the building box.

A significant disadvantage of such a material is that it is saturated with moisture.

This can lead to a decrease in its strength characteristics and, finally, to destruction. Therefore, additional efforts are required to prepare foam blocks for existence in conditions of high humidity.

When developing projects for baths, you need to take care of good ventilation, possible measures for forced ventilation in the building, as well as the organization of the slope of the drains so that the drainage of water is reliable.

It should also be borne in mind that if the project includes the use of foam blocks of twenty or thirty centimeters thick, you will not have to take additional efforts to insulate the building. And if the bathhouse will be used only in the summer, in order to heat it without using too much firewood, even ten centimeters thick blocks will be enough.

During construction, the walls inside are covered with foil or special vapor barrier membranes.

All joints are insulated with wide metallized tape.

For insulation outside, the walls are covered with mineral wool. Such material does not burn, is environmentally friendly, and mold does not appear in it. Another option is to glue the walls with polystyrene or polystyrene, reinforce with a mesh and cover with a special plaster that does not allow moisture, but only air to pass through.

Types and layouts

Finished projects of baths using a foam block are diverse. They differ depending on the area of the land plot, on the needs of a particular family, taking into account its size, on the financial capabilities of the owners, as well as their design preferences. You can choose a bath of any size, for example, 3x4, 3x5, 3x6, 4x4, 4x5, 4x6, 5x3, 5x5, 6x5, 6x6, 6x8 m and so on.

For a summer cottage with a standard plot area, the most suitable way out would be to build a bath about 6 by 4 meters or even 5 by 7. The most necessary things will definitely fit in such a space: a dressing room, which is also a relaxation room, a shower room, a steam room. An open terrace or veranda will be a good addition.

It is possible to implement a similar project in the most economical version on an area of 3 by 4 m, dispensing with an open area for recreation.

The foam block allows you to build with your own hands not only a simple box of a large or small area, but also a structure of a non-standard shape. You can choose one of the ready-made layouts offered in catalogs with projects, or develop it yourself.

An interesting option is the construction of a foam block bath with a semicircular facade. It should be borne in mind that such a project can no longer be "crammed" into an area of 5x4, 6x4 or 5x6. If the land allows, if there is a desire to build a spacious bath, for example, 9 by 9 meters, behind an unusual semicircular facade there will be not only a spacious steam room and a washing room with a pool or a font, but also a spacious recreation room with a wardrobe, as well as auxiliary premises - a boiler room, furnace and bathroom.

A good solution would be the construction of a two-story bath.

It is compact and will not eat extra space on the available land.

It is much more convenient to place everything you need on two floors, rather than trying to build a one-story building on an area, for example, 3 by 10 meters.

The layout of such a structure may include not only a steam room and a washing room, but also a spacious recreation room, a billiard room and the same small pool. Although, if the bathhouse is mainly used in the warm season, this "pond" can be located next to the outdoor bathhouse, as well as on the veranda or under a canopy, having quite a decent size. The main difficulty of such projects is the competent organization of water flow. It is imperative to provide a drainage system.

Advantages of a two-story bath:

• If the bath is two-story, the second floor will always be warm due to the heating coming from the steam room.
• On the first one there are rooms directly connected with the bath function, as well as a kitchen and a dining room. On the second floor there are living rooms.
• Such a bath will look very representative compared to a simple one-story one.
• A bath with an attic will also be a good way out in small areas.

There are many "variations on the theme" of two-storey structures of this purpose among the proposed layouts. You can implement the project of a real bath complex, in fact, representing a full-fledged house, under the roof of which almost everything that is needed for suburban life is combined: these are living rooms, a living room, and utility rooms with garages.

Interior

In addition to solving the issue of steam and waterproofing of the bath premises, you also need to competently approach the interior decoration. It is usually carried out using coniferous wood. And for a steam room, linden or aspen is more suitable, capable of maintaining a high temperature for a long time. For finishing the rest room, a lining, for example, made of pine, is suitable.

At the same time, wood trim should perform not so much the function of insulation, but the aesthetic and function of creating a special sauna atmosphere, both externally and by imparting a specific woody aroma, and so on.

Even before finishing work, you need to complete everything related to the device of communications in the bath

A wooden lathing is made under the lining on the walls using self-tapping screws and special dowels for foam blocks. The crate is treated with an antifungal compound, and the distance between it and the wall is filled with insulation. The vapor barrier material is attached to the crate with a stapler. As for the lining itself, it is attached to the base with nails or secret clamps.

For the interior decoration of the bath, it makes sense to also use tiles. It can be applied both on the floor and on the walls in the same washroom where the tree starts to rot over time. It is better for finishing to choose a rough tile with a smooth base that does not absorb water and does not allow mold to grow.

Interesting solutions can be obtained, for example, using PVC panels. They are inexpensive, easy to install, and easy to maintain. In addition, this material is not afraid of moisture and temperature extremes, which makes it possible to use it even in a room such as a washing room.

External finishing

When finishing the building from the outside, in addition to creating beauty, it is also required to carry out external hydro and thermal insulation work. Moreover, the principle of action here is the same as inside. With the help of a wooden frame, a heat-insulating layer is formed around the building box, and waterproofing is created. Variations are possible in the use of materials that will directly determine the appearance of the bathhouse.

It can be finished with plastic or metal siding. This is a very common way to give a building a pretty, elegant look.

Metal siding is durable and does not melt when exposed to fire.

It is based on galvanized steel or aluminum. Such material always adorns the facade.

You can also use PVC siding (vinyl). There is no need to paint it, as it offers many different colors to choose from.

This finishing material is not afraid of temperature extremes, does not rot and does not attract the attention of living creatures as food. Despite the fact that it is not classified as combustible, it can melt in case of fire. It can be mounted on the wall both vertically and horizontally.

It also makes sense to use ceramic siding, which is made from fiber cement. He is not susceptible to fire and frost. Externally imitates other materials. If you want to have a traditional bath, you can just choose a siding that looks like brick, wood or stone. Those who have used such material in construction claim that it does not fade for a very long time. And such a finish will serve up to thirty years.

Although no one forbids using real facing bricks to give a foam block bath a decent look. It must be borne in mind that it will be more expensive, and it is much more difficult for a non-professional builder to cope with such work on their own.

For finishing the plinths, it is recommended to use special siding with increased strength characteristics.

Since the basement part of the building heats up a lot in summer, and at other times it gets wet in rain and snow, the use of just such a material in this case is not unreasonable.

If you don't want to use siding for the exterior decoration of the bath, you can use a special lining that imitates a bar. Its width is fifteen centimeters and a thickness of one centimeter. In such "clothes" the bathhouse will look like a building made of real timber.

A material imitating a cylindrical bar is a blockhouse. This is a natural material that goes through a drying stage even at the manufacturing stage. Its moisture level at the time of sale should be no more than twelve percent.

Thanks to any of these materials, a bathhouse created from gray foam blocks will get a completely representative or even traditional look.

Beautiful examples

You always want the building, behind the walls of which they wash and relax, to be the admiration of friends and neighbors, so that it regularly becomes a place of attraction for spending time together in a friendly company in a sincere atmosphere. Therefore, the choice of layout and design must be approached thoroughly, relying on your own sense of beauty and the concept of how a real bath should look like.

• In the bath, finished with facing bricks, no one will suspect the "foam block interior". The building with a studio attic and a spacious covered terrace will look very representative, in a European style.
• Even a small bathhouse with a minimal set of functions, trimmed with siding, can look like a toy and please the eye, decorating the available territory.
• A very small bathhouse with a stone finish acquires fabulous features thanks to its large roof, which simultaneously turns into a canopy. Such a structure can become an excellent landmark for a land plot. Thanks to the wooden decking in front of the stone-enclosed building, a cozy seating area is created, protected from the sun and precipitation.

• A plastered light bathhouse under a red roof, with a large terrace finished with red bricks, will look both austere and elegant at the same time.
• With the help of siding of different colors, you can emphasize the architectural features of the bath. Thanks to this, even the simplest forms acquire rigor and elegance. An ordinary bathhouse with a small porch will look very impressive on the site. And in order to achieve such an effect, you do not have to spend huge amounts of money.
• A small, simple in design bathhouse in beige and brown tones takes on an original look due to the unusual architectural solution of the roof of the terrace. After water procedures on a warm summer evening in such an open area it will be very pleasant to spend time with a friendly conversation.