A Fence Made Of A Metal Picket Fence (47 Photos): Types, From A Professional Sheet, With Pillars And From A Corrugated Board, A Combined Fence Device

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Metal picket fence - a practical, reliable and beautiful alternative to the wooden counterpart. The structure is less susceptible to wind loads and other aggressive environmental influences. The variety of types and designs makes the product attractive to the mass of consumers. Such structures successfully function up to 50 years.

Peculiarities

A picket fence is a type of fence, consisting of separate plates, in a certain sequence distributed along the border of the site … The name has its root in the German word "stake". In Russia, a picket fence made of wood is more common, in which the planks alternate at a set free gap.

The metal picket fence (euro fence) is produced galvanized steel … First, a relief is formed on a metal sheet, then strips (shtaketin) are cut, later covered with special protective compounds and paint. Typical height of picket fences - from 1, 5 to 1, 8 m. The set of fences also includes support pillars measuring 60x60x2 mm, 2-3 crossbars (bowstrings) located between the posts, and fasteners.

A metal picket fence is an excellent protective and beautiful device . Its installation is similar to a wooden one and does not cause any particular difficulties, and different methods of fastening the pickets allow some creativity in giving the device a unique look.

The finished fence looks like a wooden fellow from a distance, but it looks much neater, more advantageous, easier to repaint and wash. The actual parameter of the Euroshtaketnik is the thickness of the material … The larger it is, the stronger the fence. The standard value is 0.4-0.55 mm.

The main material of the picket fence is steel , covered with a zinc protective film, on top of which polyester is applied, which creates protection from the external environment. The leaders in the production of such products are Belgium and Germany . The market offers a significant selection of designs that differ in shape, color, metal quality and profile width.

Profiled sheet and corrugated board in terms of their performance are clearly inferior to the iron euroshtaketnik

Pros and cons

Of the advantages of the Euroshtaketnik, we note:

• long service life - up to 50 years;
• moisture resistance, anti-corrosion and endurance in relation to sharp temperature fluctuations;
• does not need special care, except for elementary washing with water from a hose;
• factory-made picket fence does not need painting;
• a significant selection of colors that do not fade in the sun;
• beautiful appearance;
• high resistance to mechanical damage;
• the level of cost is lower than that of analogues made of wood;
• The optimum ratio of price and quality;
• the product does not need preliminary processing, trimming, grinding;
• in comparison with corrugated board, it contributes to effective air exchange and lighting of the site;
• wood fences require regular treatment with antiseptics, and metal products can function properly for a long time without the use of special protective compounds;
• a wide range of models and a variety of colors, the possibility of repainting fences;
• ease of installation and operation;
• fire safety;
• repairs are minimal.

Flaws:

• increased requirements for the accuracy of the picket fasteners;
• material with non-rolled edges is traumatic.

Views

Types of metal fences are distinguished by a number of different characteristics

1. Based on materials of manufacture . To obtain the required quality of pickets, steel sheets are rolled with a special press, which forms the profile of the product. Then the pieces of the same size are cut. Further, the resulting blanks are covered with a special polymer layer and painted. Planks differ in shape, profile, coating, metal thickness.
2. In the form of shtaketin . The planks can have a flat or curly top. When choosing products, you should check whether their edges are rolled.

3. By profile, there are:

   • - U-shaped or longitudinal (rectangular) profiling with a different number of stiffening ribs (at least 3), which is considered a fairly rigid option;
   • - M-shaped, profiled longitudinally in the center, one of the robust options with a rounded top and wide rolled edges;
   • - semicircular profiling - difficult to manufacture and expensive in terms of cost.
4. By metal thickness - 0.4-1.5 mm. The optimal thickness is 0.5 mm with a length of about 2 m.

The more stiffeners the plank has, the more bend-resistant the material is in length .… Improved, reinforced versions of slats with 6, 12, 16 ribs are also available. The typical height of the picket fences is from 0.5-3 m, and the width is 8-12 cm.

For double-sided fencing, it is recommended to choose an M-shaped profile with rolled edges.

On the coating, galvanized canvases can be like this

1. With a polymer layer, which is applied in the factory on special equipment. Such material is able to withstand high loads and significant temperature drops. If the bar is damaged, they do not corrode and serve for a long time (warranty period - up to 20 years). Available in a wide range of colors.
2. Powder-coated picket fences are cheaper because the quality of their spraying is lower - they can last up to 10 years.

By installation method

Distinguish single row and double row (double-sided, "checkerboard") methods of installing picket fences. In the second case, the planks are placed on both sides of the crossbars with an overlap of about 1 cm. Moreover, the inter-plank distance is kept somewhat smaller than the width of the picket fence. The length of the fence in this case is about 60% more than in the one-sided version, but the fence is practically not visible, although it is not continuous.

The single-row option for fastening the slats is more economical . Here, the distance between the planks is usually kept at? from their width. The step between the elements is an arbitrary value. Due to such gaps, the territory of the site can be viewed.

Disadvantage of the second method installation consists in the fact that it becomes necessary to purchase additional pillars to ensure the proper strength parameters of the structure.

The planks are usually mounted vertically . Less popular is the horizontal installation method, which can also be done in one or two rows. The horizontal fence looks original, and with a two-row installation of strips, the fenced area in this case is absolutely not visible. With the vertical method, to increase the rigidity of the fence, it is often you have to fix additional transverse joists … In this case, the strips are fixed to the logs with self-tapping screws or rivets.

A modern and convenient option for protecting the territory around the house is fences-blinds . They are reliable and durable, provide owners with comprehensive protection and are most often performed in a vertical version.

Installation of picket boards horizontally is somewhat more difficult, since you will have to install additional pillars , without which the strips will sag, which will cause deformation of the structure.

By size and distance

With single-row installation, the distance between the strips is different, since this parameter is usually chosen arbitrarily. The distance between them, recommended by manufacturers, is 35-50% of their width.

At " chess »The planks can overlap up to 50% of their width, and sometimes more. It all depends on the desired degree of "visibility" of the fence.

The height of the structure is also freely selectable … If you are pursuing the goal of the greatest closure of the territory, then the height is chosen up to 180 cm or more. In other cases, slats with a height of 1, 25 or 1.5 m are used. In the first case (without a foundation), the fence will stand at about chest height, in the second - at head level.

Typical span of metal fences (in the vertical version) - 200-250 cm. For picket fences up to 1.5 m high, 2 bowstrings will be enough, and for higher structures, 3 will be more reliable.

By type of filling

Spans can be filled in different styles. The simplest of them is straight, with pickets of the same length . On top of this design, you can adapt a special U-shaped bar , which will cover metal cuts, thereby increasing its service life, and at the same time perform an aesthetic function.

The options for filling the top of the structures are different:

• "Ladder" - when the pickets (shortened and long) alternate in location one after another;
• wavy shape;
• in the form of a trapezoid;
• Herringbone planks are set on a cone;
• in the form of a convex or concave arc;
• by the type of canyon shape - long pickets are located at the edges of the span, and in the middle - of a smaller size;
• lance-shaped, with one or more peaks in span;
• combined.

Forms can be very diverse - this is a topic for creativity . Additions with brick or stone plinths will be good decorations for originally designed spans.

Color and design

Modern low-cost picket fences can be painted on one, two sides, or produced without painting at all. Painting Is a way to make them beautiful and protect them from aggressive environments. The main problem is corrosion, which manifests itself mainly at the edges of the strips and in the places of attachment to the joists. For this reason, the screws used must be galvanized.

Color options, like the design of structures, can be very different . Fences are painted with pillars in one-sided or two-sided ways. In this case, only a layer of soil is applied to the seamy side. This type of coloring is good for summer cottages, suitable for fans and lovers of calm shades.

If you are inclined to bright options, then we are talking about double-sided coating . The fence is painted using polymer or powder dye in compliance with a special technology. A fence with such protection is able to withstand strong mechanical stress, and with the appearance of scratches on it, the metal will not rust. Reviews about this method of coloring are the most positive.

Powder coatings are cheaper and must be done using a special technology . The first layer is protective, the second is powder. The layers are baked in special chambers.

You can paint the strips and on one's own … To do this, you need to arm yourself with roof paint and a spray gun. If there is a desire to get a fence of a unique color and texture, then you will have to purchase factory material. An interesting modern picket fence can be painted and imitating a tree. There are shade options:

• under the walnut;
• under cherry or aspen;
• under bog oak or cedar and others.

High-quality coating makes it possible to recognize metal only at close range.

The design elements are varied, they are chosen arbitrarily and most often they are limited to the choice of the profile and the form of filling the spans - "herringbone", "peak", "canyon" and others

How to choose?

Choosing a fence is better inspect him in kind. The thickness of the material declared by the manufacturer is not always strictly observed. Sometimes the edges of the planks bend suspiciously easily. At the manufacturing plant, the quality of products may vary from batch to batch. The edges of the picket fences must be neatly rolled. This affects their appearance and rigidity. The only drawback of picket fences with rolling is their high cost, since rolling requires special equipment and additional processing time.

In addition to material thickness and rolling, you should pay attention to the types of plank profiling , which directly affects their strength characteristics. The more stiffening ribs provided in the profile, the greater the bending resistance of the bar, but you have to pay for everything, including the strength of the product. A metal fence should withstand attempts to bend it with your hands.

The color scheme of the structures is also important . - products painted on both sides look more harmonious.

Upon closer examination of the product by its external features, it is difficult to determine the quality side of the powder coating, so we recommend that you immediately buy a picket fence with a polymer protective layer.

Picket material universal, so its installation is quite simple. Usually, products are offered in two versions:

• euro shtaketnik with turnkey installation (including ventilated versions to varying degrees);
• materials for self-installation.

When buying a fence with installation, its cost is indicated for 1 running meter (approximately 1900 rubles). The picket fence itself is sold at a cost per 1 m². In this case, you can buy additional elements for the original design of the product.

If you want to mount a metal fence for a summer residence inexpensively, we advise you to solve the issue with your own hands. Material prices fluctuate in the range of 45-400 rubles per 1 m².

Among the most popular manufacturers are Grand Line, Barrera Grande, FinFold, UNIX, Nova and TPK Center Metallokrovli

Installation

It is absolutely not difficult to build a metal fence near the house. When performing installation work, for example, a summer cottage metal product with your own hands, the process can be divided into 3 stages:

• the stage of calculations and drawing of fencing schemes;
• purchase of materials;
• installation of the product.

Calculations are made at the design stage … On a sheet of paper, we sketch the desired design. We determine its length, the number of supports and crossbars. We determine the number of pickets after establishing the height of the fence and the size of the installation step. By the amount of material, we determine the number of fasteners.

Metal fences are attached to special supports, which are installed in several ways:

• concreting (the most reliable method, especially for unstable soils and with a support height of more than 1 m);
• by bucking (crushed stone or chipped brick) - produced on denser soils;
• driving into the ground (for heavy soils, the supports are deepened into the ground up to 1 m);
• combined options.

During the installation process, usually it is recommended to use posts made of profiled pipes 60x60 mm or 60x40 mm, and for a bowstring - with a section of 40x20 mm … Such a fence will fully withstand the weather loads of central Russia. The pitch of the posts is usually maintained at 2 m.

There are two ways of fastening the strips - with self-tapping screws and rivets, which are fixed on both sides of the strip on the crossbar. That is, with two crossbars, 4 fasteners will go to one picket, if there are three, then 6 fasteners.

One self-tapping screw located in the middle of the bar will not be enough, since the pickets can be easily pushed apart with your hands, and the degree of rigidity of such an attachment will be clearly unsatisfactory.

When choosing the type of fastener, we take into account that self-tapping screws are easier to install, but they are also easier and unscrewed. Installation of rivets - more time consuming process, but also much more difficult to remove them. At the same time, the fence can only be disassembled from inside the territory, and the outer part of the fence will remain protected. Therefore, if the territory will remain unattended for a long time, it is better to stop at rivets. Fencing strips at the borders between neighbors can be easily fastened with self-tapping screws.

To install fences with pillars made of shaped pipes on a strip foundation, you will need certain equipment:

• welding device and related additional equipment;
• special self-tapping screws, better galvanized (non-galvanized soon corrode);
• shovel;
• profiled pipes with a section of 60x60 cm;
• pipes for crossbars (lags) - 20x40 mm;
• roulette;
• plumb line;
• formwork;
• sand, cement and crushed stone;
• construction mixer;
• rope;
• screwdriver;
• screwdrivers.

It is quite within the power of one to do all the work correctly, but it is much faster and easier to work together.

At the end of the preparation phase make markup , performed using pegs and rope or tape. The pegs should be placed in the ground at the support points, and then connected with a cord. Foundations under such fences, they are mainly installed with tape, since they are reliable and fully withstand massive structures.

Metal supports need anti-corrosion protection … In addition, before installing them for beauty it should be painted in one tone with the plates.

Pipes of rectangular cross-section are usually used as cross-members, which are welded to the supports . These are often sold in stores with already drilled holes for the logs. In this case, the fasteners are made using bolts.

For fences up to 1.5 m in height, two crossbars are enough. The taller options require 3 crossbars to allow the fence to withstand wind loads more easily. The tops of the pillars and the edges of the crossbars are covered with special plugs so that water does not get into the pipes.

For fixing the picket fence, we recommend using special roofing screws with a hex head (8mm) and a rubber washer . Of course, they stand out somewhat against the background of the strips, but to a large extent they save the picket fence during the final twisting from damage by the screw head. In addition, the rubber washer acts as a grover washer, protecting the self-tapping screw from auto-unscrewing when the fence vibrates under the influence of the wind.

If you have chosen the "wave" option as the filling, then the picket plates will have to be cut . It is better to perform this operation with metal scissors (manual or electric); for this, special drill bits are also used for working with thin sheet steel. Before the operation, the place of cutting must be treated with an anti-corrosion moisture-resistant compound.

The technology for the production of metal plates for fencing provides for their cutting by means of a punching operation with special roller-knives … At the same time, the rolling of the zinc layer also occurs. Therefore, no additional protection is required.

Beautiful examples

English fence (sample) , combining all the advantages of an ideal fence: excellent stability, simple installation, designer space.

White undulating fence.

Metal picket fence - simple , suitable for a summer residence.

Element picket fence under a tree.

Metal picket fence rectangular.