Picket Fence Front Gardens (35 Photos): From Metal And Wooden Euro Fence Near The House, Other Options

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

The front garden made of picket fence gives the adjoining territory a beautiful and well-groomed look. Possessing a number of advantages, it has a certain classification and differs in the type of raw materials used. From the material in this article, you will learn about its pros and cons, varieties and nuances of installation.

Advantages and disadvantages

Picket fences have become very popular. Their choice depends on the preferences in the material, as well as the requirements for the fence. They have many advantages, they are distinguished by:

• the variability of the material used, its shape and thickness;
• aesthetic appeal, practicality and functionality;
• the presence of protective coatings that increase the service life;
• wide range of colors, up to 250 shades;
• imitation of any material due to a special coating;
• delineation of the boundaries of the site, decorated with flowers;
• quick and easy installation, variety of section shapes;
• design variability and number of stiffeners;
• variability of the distance between the slats;
• open access to sunlight and air;
• the ability to paint products from certain materials.

The profiles used are reliable and durable. They are easy to transport to the installation site, they have optimal dimensions. O you can shape front gardens with them, having minimal knowledge of working with a screwdriver. However, along with the advantages, picket fence front gardens also have disadvantages.

Often the height of such a fence is small, it does not save the flower garden from street animals . Structures of this type are classified as decorative, they do not replace a full-fledged fence. At the same time, the price for certain types of products, according to the opinions of buyers, is overpriced. This is especially true of sections made of euro-shtaketnik, which is considered the best type of material for front gardens.

Sometimes the picket fence has to be placed on a stone or brick base. This requires additional labor and the purchase of the necessary building materials. The strength of the material also differs: not every type of product has a sufficient number of stiffeners.

Despite the rich selection of quality products, low-quality raw materials for front gardens are on sale . For example, cheap plastic picket sections are not suitable for installation at all. They are not only afraid of mechanical damage, but during operation they begin to emit toxic substances. In addition, such a fence burns out under the sun, from which its aesthetics are lost.

Species overview

Picket fence front gardens can be classified according to different criteria. For example, they differ in purpose. Some front gardens only mark the boundaries of the site, others are distinguished by a solid look, combined with stone, brick, metal supports . This type of front garden can be decorated with different architectural styles.

By the type of material used, fences are wood, plastic and metal.

In addition, there are other materials that can be combined with each other. Each type of material has its own characteristics, pros and cons. Let's consider the main raw materials.

Wooden

Wood products are variable in width, thickness and height. They are environmentally friendly, easy to process and durable, which is ensured by staining and impregnating wood with special compounds. In the production of picket fence, wood of different types of trees is used . In this case, the cost and density of the material are taken into account. Such front gardens look expensive, they can be decorated with carvings for every taste. You can build such a front garden yourself. The disadvantage of a wooden fence is the need for constant touch-up. In addition, wood without special impregnation is flammable.

Plastic

Plastic picket fences for front gardens are characterized by ease of installation and unpretentious maintenance of the fence. Plastic does not need to be painted, its surface is smooth, the color scheme is varied. This material is inert to decomposition and exposure to negative environmental factors . Such a front garden does not need a foundation, it does not rust or burn.

The disadvantage of raw materials is a decrease in strength when dyes are added.

Thanks to a special additive, the painted picket fence does not fade under the sun . On sale it is found in the form of sections that are mounted using the constructor method. The only drawback of plastic is its instability to strong mechanical damage.

Metallic

Front gardens made of metal (steel) are considered strong and durable. In order to increase their service life, they are covered with an anti-corrosion compound . The color of metal pickets can be very diverse, they have different heights. Often, such items are decorated with decorative elements. In addition to steel, front gardens are iron.

Metal front gardens are still inferior in popularity to analogs made of plastic and wood.

but they perfectly decorate the landscape of the local area … The material lasts an order of magnitude longer, although without the necessary care it can corrode. It will have to be tinted almost every year.

By foundation

Picket fence front gardens differ in assembly variability. Some of them do not need a foundation at all. Others are performed on a tape basis, while others - with a base and brick pillars. The latter are considered to be a solid type of structure. The strip foundation is good in that it is a reinforcing belt of the fence, giving it additional rigidity.

By installation method

The method of mounting a front garden from a picket fence depends on its type and the effect that you want to achieve. For example, you can install a fence near a house in a country house or in a village not only in the traditional way, but also in the form of waves . The design of the fence can have a wide variety of shapes and bends, which makes it possible to give the local area a special uniqueness.

The shape of the front garden can be rectangular . If you want to make it in the form of waves, the planks are mounted so that a wavy pattern is obtained. To do this, the step is calculated in advance for the length of the fence and the interval between the pickets. The same principle is used when installing arched front garden fences.

When the front garden is made out with a ladder fence, each bar is fixed above the other, after which they are lowered. Installation using the herringbone technique is also popular, in which the tops of the planks are similar to the outlines of the crown of a spruce in the shape of a cone . In addition, installation can be not only single-row, but also double-row (both the usual vertical and horizontal).

In the second case, the so-called "chess" is obtained . The straps are fastened with an overlap or on top of each other on both sides of the bowstring. This increases the consumption of material, reduces the visibility of the front garden and its wind blowability. At the same time, the height of the front garden can be not only low, but also standard, like a conventional fence. In some cases, it reaches 1.5 meters.

By the design of the upper part of the planks

In addition to the fact that the profile of the picket fence can have a different shape (in the form of the letters P, M, C), the products differ in the upper edge processing. The trims can have a carved or hammered top edge. In the production of a picket fence, 2 types of edge processing are used: rolling and cutting of irregularities . The Euroshtaketnik has a seamed edge. It looks more aesthetically pleasing.

Often the top of the picket fence is pointed. This is done in order to protect the site from stray animals, debris and dust (debris does not collect on sharp edges).

The design of the planks is different: they can be located at the same or different heights . The second effect is achieved due to the different heights of the used pickets. If the strips are of the same height, they are covered with a U-shaped profile. So the design looks complete and aesthetically pleasing. It also extends the life of the fence.

Installation rules

Before installing the fence, calculations are made, a schematic drawing is made, which will determine the amount of building material. Wherein it is worth considering the size of the gap between the slats . Depending on the calculations, the spacing between the pickets can be from 3 to 7 cm. The maximum clearance should not exceed the width of the picket used for installation.

It is impossible to install picket fences close to each other: this worsens lighting and blowing out the front garden. On average, it is recommended to make a gap between the strips equal to half the profile width.

Installation is divided into 3 main stages: project development, calculation and purchase of material, installation . In order to install a metal picket fence, they prepare the site, ridding it of the grass, leveling the ground, removing the previous fence. After calculations and purchase of material, preparation of tools, they begin to work.

The installation sequence follows an example diagram

• First, the pillars are installed, for which the places of the boundaries are determined and the stakes are driven in.
• Support pillars are installed along them, a rope is pulled to build a front garden, holes are dug.
• The pillars are installed in the well, after which they are covered with rubble and fixed with cobblestones.
• The structure is poured with a cement solution and left to dry completely.
• The frame is mounted, transverse logs are attached to the vertical supporting elements. The guides are fixed by means of self-tapping screws at the top and bottom.
• Then, with the help of a marker, the places for fixing the pickets are marked on them. Basting will allow you to install pickets at the same distance from each other.
• Install pickets, starting work from the corner and checking the vertical level of each element.
• If the sewing is double-sided, the strips are fastened from the inside by means of self-tapping screws, and from the outside - by rivets.

When installing a picket fence with brick pillars, a technology with a strip foundation is a prerequisite. If you need to lay bricks according to the type of construction, supports are required.

In addition, you cannot do without mounting the canopies on the support pillars.

Beautiful examples

We offer several examples of the beautiful decoration of the local area with a picket fence

An example of decorating a front garden with a classic picket fence and decorative figures

Front garden design, decorated with a decorative arc-shaped fence

Arrangement of the local area with landscape decoration with a fence with an arch

A variant of the front garden design using a picket fence with sharp top edges

Decorating the front garden with a colored sectional type fence of a small height

Framing a small flower bed as a small front garden near the house

Country house front garden design with classic white picket fence

Decoration of a flower garden with yellow pickets with a cut edge

An example of the designation of the boundaries of a flower garden and a local area