A Mower For A Walk-behind Tractor (30 Photos): Choose A Segment Lawn Mower And A Mower. Characteristics Of The Zarya And MF-70 Models. How To Install?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10

A mower for a walk-behind tractor is a common type of attachment and greatly facilitates the care of agricultural land. The device effectively replaces expensive specialized equipment and perfectly copes with all the tasks assigned to it.

Characteristics

A mower for a walk-behind tractor is a mechanized device connected to the power take-off shaft of the unit by means of a belt drive. The device is easy to use, easily mounted on a walk-behind tractor, is completely repairable, has no problems with spare parts and does not require special maintenance. In addition, the mower is easy to transport and does not take up much space during storage. Due to the well thought-out design and the absence of complex components and assemblies, the device rarely breaks down and has a long service life.

Despite the fact that the mower is a device with a narrow profile, the scope of its application is quite wide . The device is used for mowing weeds, removing the tops of beets and potatoes before harvesting the root crops themselves, as well as for preparing feed for cattle and leveling the lawn in the yard or on the site. In addition, with the mower, you can harvest grain, cut small bushes and cultivate an area heavily overgrown with weeds.

Therefore, the purchase of attachments for a walk-behind tractor can completely replace the purchase of a mower, which will have a rather favorable effect on the budget.

In the modern market for small agricultural machinery, mowers are presented in a wide range . This greatly facilitates the choice of the desired model and allows you to purchase both an expensive multifunctional device and very simple budget items. The cost of new mowers starts from 11 thousand rubles, while a used unit can be bought for only 6-8 thousand rubles. For more serious samples of new technology, you will have to pay about 20 thousand rubles, and when buying the same model, but with a small amount of time - about 10-12 thousand rubles. In any case, the purchase of even a new model will cost much less than the cost of the popular Czech MF-70 mower, the price of which reaches 100 thousand rubles.

Views

Among the huge range of accessories for a walk-behind tractor, mowers are considered a particularly popular type of additional equipment and are very popular with owners of livestock complexes and farms. Devices are classified by design type and are of two types: rotary (disc) and segmental (finger).

Rotary

This type of mower is the best option for mowing grass and weed control in large areas with hilly terrain. A rotary mower is often called a disc mower, which is associated with the features of its design and the principle of operation. The device consists of 1–3 cutting discs firmly fixed to the frame and a support wheel. Inside each disc are hinged knives. The principle of operation of the device is quite simple and consists in the following: the torque from the power take-off shaft is transmitted to the pulley by means of a bevel gear, and then through the support wheel it passes to the cutting discs.

The cut grass is lifted, flattened and laid in neat swaths . At the same time, the disks can be fixed to the frame in different ways: in front of the walk-behind tractor, on the sides or behind. The front position is used mainly for weed control, while the side and rear position is used when working in crop areas. In addition to discs and wheels, the rotary mower is equipped with a damping device, which reduces the risk of damage to the mechanism when hitting an obstacle. By the type of connection of the rotary mower to the walk-behind tractor, there are mounted, semi-mounted and trailed methods.

Rotary models are lightweight and compact , which makes them especially maneuverable and allows them to mow grass with ease near trees and among bushes. The cutting height can be varied from 5 to 14 cm, and the working width is up to 80 cm. In addition, the angle of inclination of the discs is adjustable, which allows you to mow grass in areas with hilly terrain. All rotary models can be safely used on slopes with an angle of inclination from 15 to 20 degrees. Among the advantages of rotary mowers are high productivity, which allows mowing large areas in a short period of time, ease of operation and high reliability of both individual units and the structure as a whole. The low cost and long service life is also a positive point.

But along with the obvious advantages, rotary mowers have several disadvantages. These include the unstable operation of the device at low engine speeds. It is also worth noting the impossibility of using them in areas with thickets of thick-stemmed shrubs. In addition, if debris or stones accidentally fall under the mower blades, the blades quickly fail and require replacement.

Rotary mowers are compatible with walk-behind tractors such as "Oka" and "Neva", are often used with "Cascade" and "MB-2B", and are also suitable for "Ugra" and "Agros ". For the Salyut unit, the production of individual modifications has been launched. When working with this type of mower, it is imperative to use personal protective equipment. In addition, you need to be extremely careful with the removal of weeds from the roadside. This is due to the fact that in such areas there is a high probability of finding small stones that can fly out from under the disc and injure the operator. The best way to use this technique is to use the rotary model as a lawn mower.

Segmental

This type of mower has a very simple design, consisting of a frame with two bars installed in it and cutting elements placed between them. Thanks to the conversion of the engine torque into a linear-translational movement, the working knives begin to move according to the scissor principle: when one element constantly moves left and right, and the second remains stationary. As a result, the grass, falling between the two cutting elements, is quickly and evenly cut, thus ensuring excellent quality and high cutting speed. The segment mower can be mounted both in front and behind the walk-behind tractor. It is equipped with a special slide that adjusts the cutting height of the grass.

The cutting elements are easily removed from the frame, which allows them to be easily sharpened or replaced with new ones . The model is distinguished by high efficiency of work, which allows it to work on large areas with high and thick grass, medium shrubs and dry grass. For its absolute unpretentiousness and the ability to work in difficult terrain conditions, the segment model is highly popular with cattle owners and is widely used by them to harvest hay. The advantages of segment mowers include their ability to cut grass almost to the root. This is due to the fact that the cutting elements almost completely repeat the surface relief, while moving almost at the very ground.

In addition, due to the balanced operation of the knives, vibration is practically absent in the knife blade. Because of this, the operator of the walk-behind tractor does not experience mechanical recoil from the unit and is able to work in fairly comfortable conditions. The disadvantages include large dimensions and a high price.

So, segment models are almost twice as expensive as rotary mechanisms and are sold for 20 thousand rubles or more. The devices are quite versatile and fit any domestic walk-behind tractor.

Frontal

The front model is designed for mowing tall weeds with a thick stem, as well as for harvesting large amounts of hay. The device is often equipped with a rake, which greatly simplifies the work on the site. On the sides of the device there are skids that allow you to adjust the height of mowing of grasses. The model is little used with walk-behind tractors and, like the flail mower, is used mainly with mini tractors and other heavy equipment.

Popular models

The modern agricultural equipment market presents a large number of mowers of both famous brands and little-known models. Despite the fact that the vast majority of them is of high quality and has many positive reviews, some of which should be highlighted separately.

Model "Zarya-1 "manufactured at the Kaluga Engine plant and has a rotary design. The productivity of the device is 0.2 hectares per hour, which is a pretty good result for disk devices. The capture width is 80 cm and the weight does not exceed 28 kg. The model is compatible with "Neva", "Oka", "Cascade" and "Tselina", and a special modification is produced for "Salut". Installation is also possible on motor-blocks "Agro", "Belarus" and "MB-90", but in this case you will need to install an additional bracket or gearbox. The model is equipped with a height adjuster and has a high cutting quality. In addition, unlike the segment models, the cut grass is laid in neat swaths that do not need to be raked. The cost of "Zarya-1" is from 12 to 14 thousand rubles.

" KNM-0, 8 " Is a finger segmental model compatible with such motoblocks as "Neva", "Salyut" and "Kaskad". The capture width is 80 cm, the weight is 35 kg, the cost reaches 20 thousand rubles. The device is a typical representative of segment models and meets all the characteristics described above inherent in this type.

Chinese model "KM-0, 5 " also belongs to the segment type and is compatible with motoblocks such as Hitachi S169, Favorit, Neva and Salyut. The device is small in size and is able to cut grass at a height of 0.5 cm, that is, almost at the root. However, the working width of this model is somewhat inferior to that of previous mowers and is only 50 cm. The weight of the device corresponds to 35 kg, and the cost reaches 14,000 rubles.

How to install on a walk-behind tractor?

Mounting the mower on a walk-behind tractor is as follows:

first, fix the tensioning device included in the mower kit

after that, the pulley is put on the upper clutch, while the front of the hub should be "facing" the flange of the tensioner

then all installed elements are fastened with a screw, the mower is installed and a belt is put on

further, the mower is fixed by means of pins and an apron is put on to protect the operator from the ingress of grass

• in the end, a protective shield is installed on the walk-behind tractor and the belt tension is adjusted; to do this, turn the handle in the direction of movement of the unit;
• then the engine is started and a trial test is carried out.

Selection Tips

Before proceeding with the purchase of a mower for a walk-behind tractor, it is necessary to determine the scope of work and the conditions in which it will be operated. So, if the device is supposed to be used for lawn mowing, in this case it is better to stay on the rotary model. Such areas are usually free of debris and large stones, so working with the mower will be comfortable and safe. The same type of mower can be used to mow golf courses or alpine lawns, as long as the slope of the surface is not too steep and embossed . If you plan to harvest hay, remove weeds and deal with small shrubs with the help of a mower, then you should definitely choose a segment model. And when servicing large areas and difficult terrain, it is recommended to opt for a powerful frontal structure equipped with a cutting height regulator and a rake.

A competent choice, careful use and correct operation will significantly extend the service life of the equipment and make working on it convenient and safe.