Watering Hose Attachments: How To Choose A Gardening Hose Holder? Feature Of Garden Water Spray Guns, Filters And Other Accessories

Table of contents:

Video: Watering Hose Attachments: How To Choose A Gardening Hose Holder? Feature Of Garden Water Spray Guns, Filters And Other Accessories

Video: Watering Hose Attachments: How To Choose A Gardening Hose Holder? Feature Of Garden Water Spray Guns, Filters And Other Accessories
Video: Garden Hose Spray Nozzle Assembly (Garden Hose Quick Connect System) | Garden Hose Setup 2024, May
Watering Hose Attachments: How To Choose A Gardening Hose Holder? Feature Of Garden Water Spray Guns, Filters And Other Accessories
Watering Hose Attachments: How To Choose A Gardening Hose Holder? Feature Of Garden Water Spray Guns, Filters And Other Accessories
Anonim

Watering a garden or vegetable garden, washing the car, and other work with water is easiest to do with a hose. However, the rubber or bellows sleeve alone is not comfortable enough. In many cases, it is difficult or even impossible to do without a special nozzle for the irrigation hose.

Image
Image

Should you buy?

Some gardeners are hesitant to buy a water gun. Such a doubt is groundless - you should forget about clamping the end of the hose with your hands. Modern irrigation equipment allows you to easily and efficiently water your garden in any conditions. Setting up the nozzle is quite simple because the mechanisms are intuitive.

When choosing an add-on for a garden hose, you cannot focus only on the technical parameters of the product . Even the price of a particular nozzle is not too important. Of course, very cheap fixtures often don't last long. But it is also not worth overpaying, since the high cost does not always equal the high quality.

Irrigation method suitable for plants or other purposes is of paramount importance.

Image
Image

How to choose?

To make the right decision, you need to decide whether you need a manual or an automatic handpiece. If you have to water a large area (large vegetable garden), the choice between these options is obvious. But it is worth considering the need of plants for water. If even a small amount of "heavy drinking" crops are grown, the final decision is also obvious.

Manual watering is good because it allows you to customize the mode as you wish . Automatic irrigation systems are much more complicated and expensive. By using time switches as well as moisture indicators, the system can operate flexibly and efficiently.

However, in an ordinary dacha, such a decision is unjustified, because the costs will be too high.

Image
Image
Image
Image

Assortment and other nuances

The number of attachments includes:

  • adapters;
  • branching details;
  • connectors;
  • couplings;
  • nipples;
  • sprinkler nozzles;
  • sprinklers.
Image
Image
Image
Image
Image
Image

Rotating components are often purchased for systematic watering . In addition to them, hand spray guns are taken. When buying, you should pay attention to the accompanying documents. Conscientious manufacturers indicate in them real information about the pressure, pressure, jet length. It is also advisable to familiarize yourself with the reviews of specific models in advance in order to understand whether you made the right choice. Now let's see what kinds of accessories manufacturers can offer.

Nozzles-nozzles, changing the irrigation mode, can operate in manual and automatic modes . The second option is needed if the device is started with a button or a hook. The latch will eliminate the need to constantly press on these parts.

As for sprinklers, it is definitely worth giving preference to models that can block some of the nozzles. Thanks to this option, the irrigation regime can be optimally adjusted.

Image
Image
Image
Image

The list of modes that the attachments have deserves special attention. There shouldn't be too many of them. It is worth focusing only on those functions that are really needed. For example, there is almost always a need for a directed jet of liquid and for a gentle spraying. The first function allows you to wash walls, walkways. The second ensures safe watering of fragile flowers.

Automatic irrigation nozzles must always adjust the irrigation angle. If it does not change, some of the plants will remain dry. Therefore, the angle of direction of the jet is selected for each specific area.

When choosing watering cans, sprinklers and sprayers, you need to consider:

  • distance of the irrigation strip;
  • its width;
  • the area of the covered area.
Image
Image
Image
Image
Image
Image

These parameters can be used to determine how long the hose will be needed, as well as how many accessories should be installed.

A very important characteristic of any irrigation system is the pressure it creates . The nozzle should be designed for the same pressure as the domestic water supply, and ideally it should overlap with a margin. The transferred pressure is directly related to the strength of the structure.

The best materials for the sprinkler heads are ABS plastic and brass. Other options are not worth considering.

On the garden plot, it is imperative to use filters for coarse water purification.

The mesh size of the filter is determined by how large the particles are to be sifted out, that is, the quality of the water.

Image
Image
Image
Image
Image
Image

If you plan to wash your car or motorcycle, you can install a foam lance. But it is better to abandon such an idea, because even in the best garden plumbing, the pressure is not large enough. It is more correct in such cases to use a full-fledged high-pressure car wash.

When choosing connectors, you need to carefully look at which adapter they can connect to. There are three types of adapters:

  • for connection with a sprinkler;
  • for connection with a tap;
  • for connection with a watering gun.
Image
Image
Image
Image

The nozzles for filling buckets are selected, first of all, according to their power. But auxiliary options (such as precise jet delivery, split flow or long throw distance) are not needed.

As for the nozzles for spiral hoses, their selection is very simple . These sleeves are compatible with a wide variety of accessories.

Regardless of the function of a garden hose, it must be fitted with holders. The fixing device is designed to exclude the twisting of the sleeve under the pressure of water. The holders are used in both manual and automatic systems.

It all works very simply - the hose is attached with a clamp to a peg driven into the ground. If you need to fix the sleeve to the wall, use steel brackets. Holders (clamps) can be plastic or made of steel.

The first options are cheaper, while the second ones are more durable and reliable.

Recommended: