ADA Motor Drill: Ground Drill 7 And Ground Drill 5, Ground Drill 8, Ground Drill 2 And Ground Drill 9 Gas Drills, Adapters For Hole Drills

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

The installation of fences and poles is an important part of not only architecture, but also construction. For good stability of these elements, it is worth making special holes that will securely hold objects. Now, to do this work, motor-drills are used, which can be controlled without special skills. One of the manufacturers of gas drills is ADA.

Peculiarities

First of all, it is worth identifying the main features of ADA technology, and how it differs from products from other manufacturers

• High price segment . Not everyone will consider this feature an advantage, but rather take it for a disadvantage. But the price for the model is quite justified, given the other distinctive features of the hole drills. It should be added that some copies are subject to a discount in case of self-pickup.
• Versatility . Most of the assortment representatives are designed for different types of work, which is possible due to suitable technical characteristics and design. Therefore, ADA motor-drills can be used in both the household and professional construction areas.
• Diversity . A large number of models that can be purchased with or without auger. A whole series of units that differ from each other, different prices and areas of application - all this not only expands the model range, but also facilitates the choice of equipment for purchase.
• The presence of reversible units . This feature is important for those who work with particularly difficult surfaces, where the presence of a reverse stroke allows you to get out of a difficult situation. Most manufacturers have either few of these models, or none at all.
• Serial production of products . The ease of choosing the model you need is simplified due to the serial production of motor-drills. If the consumer liked a certain line of units due to its characteristics, special design or price, then there is an opportunity to study models from the same series.

They differ and each is an individual tool.

The lineup

In connection with the serial designation of the equipment, it should be said that the higher the number in the name, the more expensive and versatile the gas drill is.

Ground drill 2

A simple, reliable and inexpensive motor-drill that can help you at your summer cottage for various earthworks for the installation of large decorative elements. The main drilling depth is 1.5-2 meters . The model is equipped with a narrow handle grip, which makes it more convenient to transport equipment. Engine power is 2.45 liters. with., its volume is 52 cubic meters. cm.

Fuel filling is carried out using a solution of gasoline and oil in a ratio of 25: 1 . In this case, you can use standard AI-92 and any oil for 2-stroke engines. The diameter of the drive shaft is 20 mm, the maximum auger used is 200 mm, which is enough for simple tasks. It is worth saying that this model has a version without auger in case you have your own.

Its installation will take little time, since all mounts are universal for all motor-drills on the Russian market.

Ground drill 5

A series that is very similar to the Drill 2. The main changes were not in the technical characteristics or control, but in the design. It has become wider, which primarily concerns the handles . At the same time, the weight remained the same low. There is a version with and without auger. The volume of the fuel tank is 1.2 liters, the body is made of impact-resistant plastic, due to which the lightness of the tool is achieved.

Ground Drill 7

Improved version of the 2nd and 5th series. This time, the manufacturer took care of improving the technical characteristics, primarily of the two-stroke engine . Now its power is 3.26 liters. with., volume 71 cubic meters. cm. These changes have expanded the capabilities of the unit in terms of its efficiency and scope. Harder types of soil can now be drilled much easier and faster, as the maximum auger diameter reaches 250 mm instead of 200. The diameter of the drive shaft and the volume of the fuel tank remain the same.

As for the design, it has not undergone major changes . This model has a higher price due to the fact that it retains its small dimensions and low weight of 9.5 kg. This gas drill can be called one of the best in terms of price-quality ratio for the middle segment when carrying out work of standard complexity.

Ground Drill 8

This series is marked by changes in the workflow and the overall design of the technique. If the technical characteristics have not changed significantly compared to previous analogues, then now there is an opportunity to attract two operators. This can make it much easier to use the gas drill during hard work, where maintaining concentration and attention is very important.

A specially selected structure smoothly distributes the load to the entire part of the frame, there are protective steel arcs that prevent the entry of various elements into the inner part of the structure . A double throttle lever is installed, which is designed to work in pairs. This feature will allow you to have more control over the rpm power during operation.

Ground Drill 9

Professional yamobur designed for two people. Among the main characteristics, it is worth noting the 3.26 hp two-stroke engine. with. and a volume of 71 cubic meters. cm. Thanks to him, the auger, the maximum diameter of which can be 250 mm, will make deepening of various shapes under pillars, fences, small wells without any problems . The diameter of the drive shaft is 20 mm, there is a fuel tank with a volume of 1.2 liters, where it is necessary to fill in a mixture of gasoline and oil in a ratio of 25 to 1. Weight without auger is 9.5 kg, which is the optimal value taking into account the available technical characteristics.

The convenient design allows you to transport this motor-drill without any problems, and the presence of two pairs of handles will facilitate the work with two operators.

Ground Drill 14

A professional model that is also one of the best from the ADA. Brand new 8 HP 4-stroke engine with. and a volume of 172 cubic meters. cm will allow you to very quickly and efficiently perform work of any complexity. The main area of application is construction . Power and efficiency are the main advantages of this model. The increase in characteristics led to other changes. First of all, this is the expansion of the volume of the fuel tank to 3.6 liters. And also an extended drive shaft with a diameter of 32 mm was integrated.

The weight has increased, which is now 30 kg, so the presence of two operators is mandatory . The maximum auger diameter is 600 mm, which is several times larger than the previous ones and allows you to drill large holes in various surfaces. The robust frame and the convenient location of the handles and levers make this motor-drill comfortable to operate, despite its high power. There is a reversible, more expensive model. It has advanced functionality, which is very important when drilling deep wells, when it is not always possible to pull the auger out on your own.

Ground Drill 16

The newest technology that combines power and high endurance in tough jobs. Built-in 5 HP 4-stroke engine. with and a volume of 196 cubic meters. see To maintain the efficiency of this motor-drill, there is an air cooling system, which allows the unit to operate longer in one working session.

At the same time, it is worth noting the low fuel consumption. The built-in tank is designed for 1 liter, the diameter of the standard drive shaft is 20 mm . Weight without auger 36 kg, together with it - 42, so the manufacturer has taken care of convenient transportation of this equipment. Two people can safely carry this gas drill around the construction site without much effort. The maximum auger diameter is 300 mm, which, of course, is not as much as in the previous model, but which is enough to perform work of varying complexity and intensity.

Components and spare parts

As for the equipment upon purchase, each model is equipped with a set of tools with which the worker can assemble the gas drill, since the handles must be installed separately. You can also purchase other parts from the manufacturer, such as spring adapters, blades or extension cords. For the convenience of mixing the fuel mixture of gasoline and oil, there is a funnel.

When storing equipment in a specific place, you can place a canister next to it, which is also included in the final set . More expensive models have keys and adapters in the complete set, since there are various ways of fastening, in addition to the standard ones.

And also when buying such motor-drills, you will receive a set of handles that can be installed for more convenient operation.

How to use?

Ensure the integrity of your technique before use. Observe the safety precautions in the form of proper storage in a dry room without the presence of items with particularly high temperatures. Do not forget to replenish the fuel level, which needs to be filled in a certain ratio . As for the breakdowns and the reasons for their elimination, many of them can be described in the operating instructions. There you will also find information on what methods of working the gas drill exist and in what situations it is best to use them.