Motor-drills Carver: AG-52/000 And AG-62/000, AG-43/000 And AG-152/000, Characteristics Of Gas Drills, Auger And Other Accessories

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

The modern technology market is characterized by a large number of manufacturers who offer their products at low cost while having good quality. Among these, the Carver company stands out, which has its own range of motor-drills.

Peculiarities

• Low price . If you want to purchase an inexpensive gas drill for your home, summer cottage or garden plot, then Carver models may be the best solution for you.
• Simplicity . The technique of this manufacturer is simple and not equipped with a large number of functions that need to be applied in certain situations. One person can cope with Carver motor-drills without experience in operations with such a tool.
• Good quality . Despite such a low price, the quality of the devices is quite acceptable. Compared to other companies that produce similar equipment, the characteristics of the Carver models are not bad.

In terms of price-quality ratio, it is quite a worthy technique, which is worth paying attention to.

The lineup

AG-52/000

AG-52/000 is one of the first models to be equipped with a 1.9 hp 2-stroke engine. with. and a volume of 52 cubic meters. cm. The diameter of the output shaft is 20 mm, the auger is not included in the delivery set. Power - 1400 W, fuel tank capacity is 0.8 liters. The rotation speed can reach a maximum of 280 rpm. One handle is the control handle, which contains most of the buttons and levers.

The main area of application is everyday life, namely, drilling small depressions in the soil or working with ice . At the same time, this unit is one of the most popular among Carver consumers, since the price-quality ratio is excellent for simple work in the country.

AG-62/000

AG-62/000 is a more powerful unit with better technical characteristics. The engine power was increased to 3 liters. with. and volume up to 62 cubic meters. cm. A mixture of gasoline and oil is used as fuel, for which a 1.1 liter tank is provided.

The diameter of the output shaft is 20 mm, there is no auger in the package, but you can easily install your own . The maximum drilling depth is 1 meter, which is quite enough for installing fences, lanterns, creating small wells. Weight - 9, 4 kg, which has a positive effect on transportation.

AG-43/000

AG-43/000 - the smallest and cheapest model, intended only for domestic use. Like other gas drills, there is no auger in the delivery set, but any with a diameter from 70 to 250 mm will do, which is the optimal size for performing simple jobs of various types. Engine with a capacity of 1.7 liters. with. and a volume of 43 cubic meters. see consumes fuel as a mixture . To replenish it, a 1, 1 liter tank is provided. As for the design, one person can handle the work, given the low weight of 9, 35 kg. The main applications are in soil work to create shallow holes and ice drilling.

Unconvincing technical characteristics are compensated by the optimal dimensions, weight and design (provided for the most convenient use, subject to the average duration of the working session).

AG-152/000

AG-152/000 is the newest unit, which, perhaps, will not surprise anyone with its technical characteristics, but it can draw attention to itself with its simple and convenient design. It is designed for medium duration work, even at the maximum pace . The optimal position of the handles does not allow you to experience inconvenience due to vibrations that arise during the operation of the tool. Specifications are the same as other models and are within the appropriate level for home use. The scope of application is the drilling of wells and holes for small wells, fences, lanterns, elements of country and garden construction.

Like previous models, this one is supplied without a screw, but with one, the diameter range varies from 70 to 250 mm . The maximum drilling depth is 1 meter - for both soil and ice. The design is designed for one operator who can operate the device thanks to the control panel located on the handle. Weight - only 9, 2 kg, which allows you to transport this drill both on the territory of your own site and over long distances. Due to its small size, you will not have any problems with the location of the tool in the machine. There is a 1, 9 hp 2-stroke engine. with. with a volume of 53 cubic meters. see Fuel tank for 1, 1 liter, shaft diameter - 20 mm.

AG-252/200 PRO

AG-252/200 PRO is the only Carver motor-drill that has an auger in the delivery set. It has a diameter of 200mm and is suitable for most simple hole drilling jobs. Air-cooled two-stroke engine with a capacity of 2.1 liters. with. and a volume of 52 cubic meters. see not bad even in comparison with models from other manufacturers. The maximum rotation speed is 190 rpm.

Weight - 12 kg, which is slightly more than the standard that other models have, but the optimal ratio of power and price in any case allows us to call this unit good for private use. The manufacturer took care of the availability of good endurance of the equipment, as well as protection against shock loads that the drill may be exposed to when working with a non-uniform surface. Built-in Quick Start system for quick engine start. There is a fuel pump if you are operating in colder temperatures.

Components

Most of the accessories can be purchased separately from the manufacturer. This approach has both advantages and disadvantages. You can pick up those elements that are of interest to you personally, but then you have to think about purchasing them and then installing them on the equipment.

The main components are augers, replaceable knives and extensions of various sizes and diameters.