2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09
To keep the foundation from precipitation, as well as extend the operational life of the building, it is necessary to perform a blind area around the house . It is made in a variety of ways. The reliability of the protective strip and the durability of the building depend on the quality of the selected material. In the article, we will consider the installation of a blind area using geotextiles. Let's figure out what it is and what value it has for the safety of the building.
What is it needed for?
Blind area - a waterproof strip of concrete and other materials, made around the house to protect the foundation from freezing and precipitation . It protects the base of the building and retains heat.
Geotextile is a synthetic material with a wide range of applications. It is used in construction, when performing road works, in the fight against erosion (fortifying river banks), in agricultural activities, for creating landscape design.
When arranging the blind area geotextiles are laid in the form of a substrate under crushed stone and sand, where it works as a filter in the drainage system . The material allows water to seep and go into the ground, but at the same time retains impurities that clog the drainage . In addition, the substrate laid in layers does not allow crushed stone to creep along the soil.
Any kind of pipes that leave the house through the ground are also wrapped with synthetic material.
The advantages of geotextiles are as follows:
- it is durable, can withstand heavy loads;
- has a low weight;
- unlimited service life;
- the substrate is frost-resistant;
- easily fits in the process of arranging the blind area;
- levels, softens the effects of shrinkage;
- is an ideal material for filtering sediments and groundwater.
Views
Geotextiles can be classified according to the method of production and the raw materials used in their manufacture. According to the method of production, the products are divided into several types.
Woven
Geofabric is woven like a canvas using strong synthetic threads. The weaves are at right angles. The finished fabric is impregnated to provide additional strength. Woven products are inferior to non-woven products in terms of tensile and tear characteristics.
Non-woven
This type of product is produced in different ways
- Needle-punched option . A semi-finished fiber made of synthetic fibers is pierced with triangular needles with special notches. The fabric gains filtration capacity, becomes denser and at the same time becomes more elastic.
- Thermoset … It is a variant of reinforced needle-punched fabric. The finished product is heat treated with hot air, as a result of which the filtration capacity decreases, but the strength of the material increases.
- Thermally bonded … The calendering method is produced from molten synthetic granules. Synthetic fibers are fused onto the resulting surface. The result is a very durable homogeneous layer.
Geotextile is also divided according to the type of raw material from which it is produced. There are several of the most common options.
- Polypropylene has a dense structure, strong to tear, but becomes brittle when exposed to sunlight. Therefore, it is not used as a covering material.
- Polyester Geotextiles are often made from recyclable materials, such as recycled plastic bottles, which significantly reduces its cost. Due to the impossibility of producing long threads in this way, the fabric turns out to be more fleecy and less durable.
In addition to the listed options, products are produced from polyamide, polyethylene. Sometimes blended fibers, viscose, fiberglass are used.
How to choose?
Not every type of geotextile can be used for blind areas around the house. It is better to use a material that has a high density and ability to filter moisture. The nature of the soil of the area and other external influences should be taken into account. Each canvas has its own characteristic features, and you need to pay attention to them when choosing.
- Thermally bonded and blended geotextiles should not be used if the soil contains fine clay particles.
- Best load-bearing and resistant to chemicals and other chemicals synthetic polypropylene fabrics , For example, TechnoNIKOL .
- Less durable material is made from polyester … However, it has the lowest cost.
- For long-term operation of the blind area, it is better to choose dense, water-conducting fabrics, such as Dornit . It should be remembered that the stronger the material, the higher its cost, so the choice will have to be made with an eye to budgetary possibilities.
Application technology
When creating a blind area around the house with your own hands, you should first find out between which layers you need to lay the hydro-textile backing, how to lay it correctly, where you need to lay the technotextile. In order not to be mistaken, it is better to make a small auxiliary diagram for yourself.
In most cases, the layers are stacked in a specific sequence, which we will discuss below
- In a prepared trench on the ground pour in a little clay .
- Having compacted and leveled the clay layer, it is covered with a waterproofing membrane … It is important that the edges of the pavement rise to the next level with the sand and do not allow it to mix with the soil.
- Having laid the sand on the waterproofing, it is covered with geotextiles from above and the ends are turned up again … So the next layer of rubble or pebbles will not mix with the soil.
- On crushed stone re-lay the technotextile , protecting it from all sides from creeping.
- To level the surface, repeat the sand level again , and then a top covering, such as paving slabs, is installed.
When working with geotextiles, you need to ensure that the overlaps at the joints are at least 30 cm, and also do not forget to make allowances around the entire perimeter. Therefore, it is better to buy the material with a margin.
Geotextile, participating in the drainage system, contributes to the protection of the building from precipitation and freezing
Synthetic fabric inhibits the growth of weeds, provides thermal insulation.
Recommended:
Blind Area Around The House On A Slope: How To Make A Blind Area Of concrete On An Uneven Area With Your Own Hands? Installation Of A Blind Area Along A House On A Slope
How can a blind area around the house be made with a slope? How to make a concrete blind area on an uneven area with your own hands? How do you correctly prepare the basis for the installation? What materials can an inclined blind area be made of? What is the arrangement of the blind area along the house on the slope?
Repair Of The Blind Area: How To Repair The Cracks In The Blind Area Around The House With Your Own Hands? How To Properly Repair The Blind Area That Has Moved Away From The Foundation?
How to repair a blind area at home with your own hands? How to repair cracks around the house? What to do if the blind area has moved away from the foundation? How to remove other defects?
Concrete Blind Area (38 Photos): How To Properly Make A Blind Area Around The House With Your Own Hands? Installation Of Blind Area And Concrete Composition, Pouring Technology, Repair
Concrete blind area: how to properly make a blind area around the house with your own hands? What tools are required? Blind area arrangement, concrete composition, pouring technology and design requirements. How to repair a concrete blind area?
Soft Blind Area: Around The House And The Well. How To Make A Hidden Blind Area With Your Own Hands According To Step-by-step Instructions? Flexible Blind Area Device
What is the characteristic of the soft blind area around the house and the well? How to arrange it correctly? How to make a hidden blind area with your own hands according to step-by-step instructions? The device of a flexible blind area, examples and methods of finishing, recommendations for laying a multi-layer backfill covering to drain water from the basement
Concrete Brand For The Blind Area: What Cement Is Needed For The Blind Area Around A Private House? Which One Is Better To Use For Filling The Blind Area According To SNiP?
Blind area - a special covering in front of the building, which is used in order to increase the life of buildings. Blind areas allow you to protect the foundation from melt water. In addition, the blind areas can be used as a walkway next to the building.