Sizes Of PVC Panels: What Are The Length, Width And Thickness Of Plastic Wall Panels, Standard Sizes For Walls

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Progress does not stand still, technologies in the field of building materials are being improved. As a result, recently, 10-12 years ago, PVC panels appeared in Russia for decoration, decoration of walls, ceilings in living and bathrooms, on balconies and loggias. PVC panels have won the attention of buyers for their simplicity, ease of installation and their advantages.

Properties: advantages and disadvantages

Polyvinyl chloride panels are characterized by a considerable number of advantages.

• Excellent appearance is maintained for a long time. If you clean regularly using cleaning or soap solutions, the quality and novelty will delight you for a long time.
• Acceptable price. Allowed to revitalize the apartment with a moderate budget.
• A variety of types, configurations, categories.
• The versatility of the color palette helps to show all kinds of designers' ideas.
• They tolerate increased loads, temperature drops. Moreover, they are durable and safe. The combustion temperature is very high - over 399 ° C.
• Resistance to moisture, numerous types of fungus, mold.
• Easy to wash and clean with simple detergents.

• Repairs are quick and easy using PVC panels. The end result is practical and tidy. No special knowledge is required to install.
• Not difficult to replace if damage occurs.
• The design is lightweight and easy to install.
• Differs in good sound and heat insulation.
• Environmentally friendly material. Polyvinyl chloride is a thermoplastic plastic made from natural gas or oil and sodium chloride by electrolysis. This inert, durable chemical is absolutely harmless: it is used to make children's toys, packaging for dairy products, containers for storing water and food.

But PVC panels also have disadvantages:

• fragility (the panels are hollow inside, the configuration is supported by stiffening ribs);
• the release of toxic gases in a fire.

Plates-PVC differ in purpose and method of joining

The structure of the panels consists of two plastic sheets rigidly joined together by small longitudinal bridges. The corresponding pattern is applied to the front side, and the side edges are made with projections and grooves.

Varieties

By design, there are two categories: wall and ceiling.

The first ones are characterized by a long service life, strength and resistance to moisture (they do not allow water to pass through even at the joints). Their weight differs significantly from the ceiling ones.

They differ in terms of strength and are subdivided, in turn, into several subspecies.

Panels with 3D effect or offset printing

Perfect 3D drawing, branded full-color printing, insulating layers of varnish make them look like natural stone, wood, ceramic tiles or high-quality graphics. UV paints applied to the panels dry instantly, the next layer of varnish does not allow chemical interaction with air.

Drawing up drawings, paintings, ornaments, compositions from panels will help to make the interior unique, original, unique.

3D panels are a wonderful solution to the problem when creating a new, comfortable interior in an apartment, office, store.

Thermal or thermal transfer panels

The technique of applying decor to PVC plates is called thermal printing and transfers all kinds of patterns, colors to choose from. A drawing is displayed on a polymer film, then on specialized equipment at a high temperature it is re-shot onto the surface of the panel. The resulting front side of the panel is not varnished: the film-coated paint is resistant to wear, moisture and ultraviolet rays.

Ease of installation, moisture resistance, resistance to temperature extremes - all this makes the panels a recognized leader in the design of individual studios, public institutions, living rooms.

Laminated panels

A method of manufacturing laminated PVC panels consists in gluing a film with a pattern and an embossed texture (dressing) to the plate. A film is applied to the front surface using a specific adhesive and wrapped on the back. At the edges, the film does not exfoliate, and the material receives additional technical properties: durability, practicality, strength to involuntary actions (the drawing does not deteriorate over time, it is difficult to spoil it and even scratch it).

Laminated PVC panels are used in the kitchen, toilet or bathroom, office premises. In addition, this is an excellent option for use on a balcony, loggia: the temperature regime does not affect this type of panel. The panels are coated with a special antistatic agent, so dust particles do not settle on the surface. The quality of the panels, as a rule, is certified by an appropriate certificate.

As for PVC ceiling panels, they are somewhat thinner than wall panels. They can be of the following sizes: width - 25 cm, 37 cm, 50 cm, length - 2 m, 7 m, 3 m, 6 m; thickness - 4-10 mm. By design, there are two- and three-section, in color and texture - matte and glossy, white and with imitation of natural materials, bright and pastel colors.

PVC ceiling panels have the following positive qualities:

• when used, they are not subjected to mechanical action;
• products can be mounted in premises for various purposes: residential and public, office and retail;
• not prone to the formation of fungus, mold, therefore, they are used in rooms with high humidity;
• giving the apartment an aesthetic look, the plates make communications invisible to the eye: electrical, engineering;
• maintenance is not difficult: simple soap solutions are enough to clean the surface from contamination.

Device options

When choosing PVC wall panels, you should consider how they will be located: vertically or horizontally.

The size of the panels depends on the choice of design solutions:

• for options with 3D effect or offset printing: width - 25, 37, 50 cm, length - 2, 7 or 3 m, thickness - 8-10 mm;
• for panels with thermal printing or thermal transfer: width - 25 cm, length - 2, 7, 3, 6 m, thickness - 8-10 mm;
• for laminated models: width - 25 cm, length - 2, 7, 3 meters, thickness - 8-12 mm.

The connection of the plates is carried out in two ways: they are either glued to the wall, or fixed on a prepared crate.

In the first method, the walls should have a perfectly flat and smooth surface . To do this, they must be prepared in advance: carefully remove the old cladding, remove grease, dirt, fill up the cracks, apply a primer and level. Dimensional differences within 5 mm are permissible. If more, then after a while the panel is deformed and may come off.

Repair work on fixing the slabs with glue is incomparably simpler and cheaper: the need for the construction of a lathing structure finally disappears.

It is not necessary to spend a lot of time and effort to install the panels - any beginner will cope with this task. But this option also has a significant drawback: in case of breakage or damage, it is difficult to remove the damaged panel from the wall and replace it with a new one.

The method of fastening PVC panels using a crate has a number of positive points: better sound and heat insulation, there is no need to level the walls, you can not remove old paint, wallpaper.

Sheathing structures are of three types, depending on the type of material from which it is made

• Wooden . In this case, the structure consists of wooden slats and beams, which are screwed to the plane at an equal distance from each other. The distance between the slats for the walls is no more than 30-40 cm, for the ceiling - not less than 30 cm - this is the main standard. The lathing relative to the panels is fixed perpendicularly to the wall surface. The parts are fastened with self-tapping screws, which is very reliable and convenient.
• Metallic . To build a metal crate, a metal profile is chosen. Self-tapping screws are replaced with special brackets, which provide quick and safe fixation to the wall. Kleimer is a fastening bracket that is created from a metal perforated plate. Clips are used for concealed mounting when attaching plastic panels, in which the connecting parts are invisible on the surface of the building finish.

The construction of a frame base in the form of a crate helps to cope with insulation on the balcony and loggia. The voids in the crate are filled with insulation, then sheathed with PVC panels.

Plastic . For the manufacture of a plastic frame, a U-shaped profile is used. The advantages of this solution: lightness of design, absolute resistance to moisture and various temperature conditions, plasticity in processing. The profile is fixed to the base with self-tapping screws or dowels at intervals of 30 cm.

The disadvantage of all these methods is in the construction of lathing, which entails additional costs of time, money and a decrease in living space.

Panel options

The parameters depend on the connection option and the variety of sizes of PVC panels.

The methods of connecting panels to each other are divided into three groups

• Suture or slatted lamellas copy the lining, which is characterized by such a connection. The seam is clearly visible and is part of the design. The panels are characterized by high rigidity and resistance to involuntary disturbances. Looks like regular finishing boards. Standard size: width - from 12-30 cm, length - from 0.9-3 m, 6 m, thickness - 4-10 mm.
• Seamless joints are connected without a visible joint; with proper installation, a flat surface with barely visible joints is obtained. The result of installation and assembly depends on the quality of the material. Standard size: width - 15-50 cm, length - 2.7 m, 3 m, thickness - 4-10 mm.
• Rust version. To connect this group, a decorative recess is made in the profile - a groove, which has the shape of a protrusion, due to which a flat embossed surface is obtained.

There are several types of PVC panels depending on the size.

Tiled

The tile material is similar to ceramic tile. To create an unusual interior, you can combine monochrome options with plates that imitate natural stone, have a pattern or are decorated with mosaics when laying.

Standard size: 30x30 cm, 98x98 cm, 100x100 cm, thickness 1-5 mm.

Wall

Used for wall decoration. A variety of shades, textures, textures offers to make the interior of the house stylish and bright.

Standard size: width - 15-50 cm, length - 2, 6/2, 7/3 m; thickness - 6-10 mm.

Leafy

They are large in size. When working with this type of panels, a significant area is covered - it will be unusual and interesting to design.

Standard size: width - 50 -122 cm, length - 0, 9-2, 44 m, thickness - 1-6 mm.

Lining

It has a smooth glossy surface and is available in a variety of colors. The connection takes place according to the tongue-and-groove locking system, which allows installation without difficulties. Vertical laying of boards visually makes the ceiling higher, and horizontal - expands the wall.

Standard size: width - 10-30 cm, length - 0.9-3 m, thickness - 4-8 mm.

Decorative possibilities

Decorative PVC wall panels are becoming perhaps the most popular among finishing materials in the interior. Facing with PVC panels is an easy and dust-free finishing method. Installation of PVC panels is carried out in the same way as the process of assembling a children's designer, so even a non-professional can cope with it.

The quality and aesthetic feature of decorative panels allows you to implement original design ideas in conditions of budgetary and high-quality warranty repairs. The presence of 120 colors and textures, various shapes and textures will help you accomplish these tasks.

When buying plastic panels, pay attention that they are even, do not have waves, dents, drops. It is desirable that they are from the same batch and do not differ in color, shade. The quality of installation will be only when using flat slabs: without distortions, shifts and with invisible joints.

Pay attention to the availability of sanitary and hygienic safety certificates, product compliance with technical specifications and GOST.

You can see the installation of PVC panels below.