2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10
One of the main trends in modern design is the use of a variety of natural wood slabs. Oak slabs are very popular, which not only look advantageous in appearance, but also have other good characteristics. Before buying slabs, we strongly recommend that you understand this topic in more detail, because even among professionals it is of great interest.
Peculiarities
An oak slab is a wide longitudinal cut of a tree, or rather an entire section of an oak trunk. Such cuts are massive slabs, in addition to oak, they are also made from other valuable tree species . However, it is oak that is valued above all, due to their characteristics. They are strong, dense and have a very interesting structure. And oak itself is very wear-resistant, and products made from it can last for hundreds of years, because they are not afraid of moisture and are practically not susceptible to the formation of fungus on them, unlike other types of wood.
Furniture components are made of oak slabs, and they are often used as independent elements for various interior solutions.
Untreated oak slabs reveal the beauty of this tree. Everything is appreciated here: natural color transitions, an original pattern, the presence of knots and the contours of an oak trunk . However, it should be understood that such wood products can cost a decent amount, even unprocessed. And in the form of products, such as a table, they can even cost a fortune.
It is very important to know that the slab thickness should be from 50 to 100-150 mm maximum . The wider the slabs, the more they are appreciated among the craftsmen who process them, and then among the buyers.
The advantage of slab products is that they do not require careful maintenance. They need to be looked after no more than any other natural wood products.
What are they?
A quality slab is a solid solid wood without any glued parts and incomprehensible joints. The edge of the oak is usually not processed or, on the contrary, emphasize its beautiful relief.
Slabs come not only from longitudinal cuts, but also from transverse cuts . Longitudinal cuts are considered the most popular and demanded, they are often made from the strongest part of the trunk - from the bottom.
But at the same time, small longitudinal cuts from the end of a tree are often used for the manufacture of small furniture products or accessories for the interior.
Of the main varieties, the following slabs can also be distinguished:
- unprocessed.
- painted.
Raw slabs are perfect for bringing to life a wide variety of interior solutions and ideas. They can be purchased independently, further processing and giving them the desired look, but often customers prefer to choose already directly processed and painted slabs, which require less hassle.
Where are they used?
Products from oak slabs can be used in a variety of styles and interiors. Products with the so-called natural and untreated edge became fashionable not so long ago, but they are often installed not only in homes, but also in various institutions.
Tables look exquisitely made of oak slabs . In them, the slab is used as a table top. Of course, it is pretreated and sanded, removing all irregularities, and also covered with a special protective layer.
Expensive, modern, but at the same time eco-friendly look tables made of oak slabs, complemented by epoxy resin and glass . Such tables can be dining, as well as small coffee or coffee tables. They can often be found in modern offices.
Oak slabs are often used to make bar counters, cabinets, window sills and other pieces of furniture, including chairs, benches, benches and stools . They are used as some pieces of furniture, for example, in the manufacture of headboards.
Natural wood slabs are often combined with stones and glass . Today, cabinet furniture can be found from oak slabs, and steps for stairs are often even made from the densest wood. Due to the durability of oak, it is often used for bathroom sink countertops, as well as unique countertops for luxury kitchens. Moreover, such countertops, with proper processing, will be very practical.
Slabs are especially often purchased by designers who bring to life interiors with natural and environmentally friendly materials. Besides, furniture made of oak slabs will surely be the focal point of the whole house or apartment.
Recommended:
Slab (22 Photos): What Is It? Slabs Made Of Marble, Onyx, Gabbro, Porcelain Stoneware And Others. Slab Sill And Other Products
Slab - what is it, what types are there? How do you get flat cuts of wood and stone? What are the characteristics of slabs made of marble, onyx, gabbro, porcelain stoneware and others? Slab sill and other products - what are the production features?
What Can Be Done From Wood Cuts? 92 Photos Crafts For Decor With Your Own Hands, A Wall Of Saw Cuts In The Interior, Drawings On Saw Cuts And A Wooden Owl, Watches And Other Products
What can be done from wood cuts? Interesting ideas for summer cottages and houses. Crafts for decor with your own hands, a wall of saw cuts in the interior, original panels and Christmas tree decorations for the New Year, drawings on saw cuts and a wooden owl, clocks and other products
Granite Slabs: Dimensions Of Granite Slabs. What It Is? Black Slab And Other Options, Production And Features Of Use
What are granite slabs, how are they used in architecture and construction? What are the sizes of slabs? What other colors are used if black is not the most popular slab color? How is granite slab applied? What are the options for using it in the interior and outdoors?
Panel From Wood Cuts (20 Photos): How To Make A Panel From Wooden Saw Cuts And Timber With Your Own Hands On The Wall?
A panel made of wood cuts gives the room a special comfort. How to make a panel on a wall from wooden cuts and timber with your own hands? How to properly prepare wood blanks for work?
Oak Veneer: What Is It? Radial And Tangential Cuts, Texture, Veneered Chipboard And MDF, Dimensions, White Sawn Veneer And Other Types
Where is natural oak veneer used, what is it? How do radial and tangential cuts differ from each other, what texture do they get? Where are veneered chipboard and MDF used?