Sizes Of Furniture Boards: Thickness And Width, Boards 10-30 Mm And 28-40 Mm, 800x2000 Mm And 1200x600 Mm, Thin And Thick Options

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Furniture board (glued solid wood) is a wood material in the form of sheets glued from several plates (lamellas) from natural timber. It is a reliable material that can withstand heavy loads.

Each manufacturer produces products in their own sizes, so the range of furniture boards on sale is very large . You can find solid wood in a variety of types of wood and almost any length or width. This allows you to purchase a workpiece that will exactly match the dimensions of the desired part (for example, cabinet wall, shelf, staircase), you do not have to cut anything and adjust it to your size.

But still, there are some industry standards: it is more profitable for manufacturers to make panels of the most popular sizes - for the typical dimensions of furniture. Consider what options for thickness, length, width are considered the most typical for a furniture board.

Thickness

Thickness is a parameter on which the strength of the furniture board and its ability to withstand the load largely depend. The standard glued solid wood has a thickness of 16 to 40 mm. Most often in retail there are options 16, 18, 20, 24, 28, 40 mm . Shields with other dimensions are made to order, such blanks can be from 14 to 150 mm thick.

Furniture boards with a thickness of 10 or 12 mm are not made. This thickness is only available from chipboard or laminated chipboard.

Although externally, a furniture board and a chipboard sheet may be similar, in size and appearance they are different materials: both in manufacturing technology and in properties. Chipboard is much inferior in strength, density and reliability to an array of timber.

Depending on the thickness, furniture boards are divided into:

• thin - up to 18 mm;
• medium - from 18 to 30 mm;
• thick, high strength - over 30 mm (usually they are multilayer).

In each case, the thickness is selected based on the tasks . It should be sufficient so that you can mount the screed, if necessary, and in the future the material withstood the load: the shelf did not bend under the weight of the books, the steps of the stairs did not collapse under your feet. At the same time, the thickness should not be excessive, so as not to make the structure heavier, because the glued solid weighs almost the same as the natural one - several times more chipboard of the same area.

Usually choose:

• for shelves for light things, furniture walls, facades, economy class worktops –16–18 mm;
• for furniture bodies - 20–40 mm;
• for wall cabinets and shelves - 18–20 mm;
• for countertops - 30–40 mm, although thinner ones are sometimes used;
• for the door frame - 40 mm;
• for the door leaf - 18–40 mm;
• for the window sill - 40 mm;
• for elements of stairs (steps, risers, platforms, bowstrings) - 30–40 mm.

Length

The length is the size of the longest side of the furniture board. For a one-piece panel, it can be from 200 to 2000 mm, for a spliced panel - up to 5000 mm. The options are most often on sale: 600, 800, 1000, 1100, 1200, 1400, 1600, 2000, 2400, 2500, 2700, 2800, 3000 mm.

Many manufacturers build a ruler so that the length changes at intervals of 100 mm.

This allows you to select a panel of the required height for the walls of any cabinet furniture, to create long structural elements (for example, railings) of the required length.

Width

The typical width of the furniture board is 200, 300, 400, 500 or 600 mm. Also, the running values are 800, 900, 1000, 1200 mm. The width of a standard panel is usually a multiple of 100, but many manufacturers include 250 mm panels in their lines - this is a popular size for mounting window sills.

The width of an individual lamella can be 100–110, 70–80, 40–45 mm

Overview of standard sizes

Parts with a width of 300, 400, 500, 600 mm and a length of 600 mm to 3 meters are convenient for creating kitchen furniture. The depth of the lower kitchen cabinets is usually chosen 500 or 600 mm - in accordance with the dimensions of gas or electric stoves . The depth of the wall cabinets or shelves is made a little less so that they do not turn out to be too heavy - 400, 300 mm. Such shields are easy to find on sale and choose a model from the right type of wood of a suitable color.

Also on sale are widely represented furniture boards in the sizes of typical furniture worktops: width - 600, 700, 800 mm and length - from 800 to 3000 mm

For example, the 600x800 mm format is suitable both for a small kitchen table in an apartment, and for written, computer options.

For the dining table, experts recommend using a board made of noble wood species (oak, beech) 28 or 40 mm thick. The table top from it looks expensive and presentable, it will not bend under the weight of the dishes and can serve for more than a dozen years. Popular panel parameters for such countertops are 2000x800x40, 2400x1000x40.

Thinner boards made of hardwood or coniferous wood are also used for countertops, they are more affordable and allow you to create graceful countertops for any interior. The main thing is not to skimp on fasteners and additionally strengthen the bottom of the countertop with bars.

Shields of 2500x600x28, 3000x600x18 mm are also popular . These are universal sizes that are suitable both for the manufacture of countertops and for assembling cabinet furniture, creating partitions in office and residential premises.

Shields of 800x1200, 800x2000 and 600x1200 mm are in great demand . They correspond to the characteristics of the cabinet body: depth - 600 or 800 mm, height - 1200-2000. Such blanks are also suitable for countertops.

Panels with a width of 250 mm and a length of 800 to 3000 mm are relevant for the installation of a window sill . Also, a shield of this width is used for stairs, shelves.

Square boards are in demand. Small-sized panels 200x200 mm are widely used in interior decoration.

Such cladding looks noble and allows you to create a cozy, warm interior. Shields 800x800, 1000x1000 mm - a universal option for a variety of tasks . Thick (40-50 mm) sheets of such dimensions can be used as a staircase in a country house or as a tabletop of a stylish table for a living room. Thinner ones are suitable for the body, kitchen cabinet doors, bedside tables, as well as for finishing large rooms.

Custom dimensions

Sometimes a shield with special dimensions or characteristics is required to implement a design idea. Sure, if the web is too large, you can cut it yourself . But if you need a large sheet of non-standard sizes, it is very difficult to connect two smaller shields so that the seam is not visible - this greatly spoils the appearance of the product. But the main thing is that it will be less durable.

Also, a shield of the desired design is not always on sale: from a certain type of wood, with one or another symmetrical "pattern" of lamellas and texture . In such cases, it is better to order an option with the required dimensions and characteristics from the manufacturer. Custom-sized glued wood can be more than 5 m long and up to 150 mm thick. Also, many companies provide cutting and edge processing services.

How to choose?

To choose a furniture board that is best suited for your tasks, you need to decide:

• what maximum loads it must withstand;
• what quality should be;
• what shade and pattern do you need a tree.

Load

Existing wood species vary in strength. The most durable are oak, beech. It should be borne in mind that the stronger the tree, the more it weighs. For example, a panel of 1200x600 mm in size and 18 mm thick from pine weighs 5.8 kg, and a sample of the same length and width from oak 40 mm thick - 20.7 kg.

Therefore, when choosing a material, a balance of strength and weight must be observed.

Also, the strength of the shield depends on the assembly technology

• Solid or spliced . Spliced ones are considered more reliable - with this arrangement of lamellas, the load on the wood fibers is distributed more evenly.
• Lamella joining technology . The connection on a microthip is more reliable, but smooth gluing looks more aesthetically pleasing - the seam is completely invisible, visually the shield is almost indistinguishable from the array.
• View of the lamella cut . The strongest are the radial cut lamellas, the tangential cut lamellas are less durable, but the structure of the tree is better visible on them.

Quality

Depending on the quality, the sheets of the glued array are distinguished by grades:

• extra - from solid lamellas, selected according to texture, from raw materials of the highest quality, without defects, cracks, knots;
• A - high-quality materials, as for the extra grade, but can be either whole-lamellar or spliced;
• B - knots and small cracks are allowed, lamellas are selected only by color, but not by texture and pattern;
• C - raw materials of low quality, there may be cracks, resin pockets, visual defects (knots, spots).

Both sides of the shield can be of the same grade or different, therefore it is usually indicated by two letters: A / B, B / B.

Wood species, color, appearance

The color of the glued solid wood depends on the wood from which it is made. There are several hundred options and shades of natural wood: from almost black to white, there are darker and colder tones. Wood has not only its own shade, but also a unique pattern and texture . Among the available options, it is easy to find one that will suit your taste and will decorate any interior. The most beautiful are products made of alder, birch and oak, wenge. Coniferous slabs retain a warm, resinous smell.

Also, the appearance depends on the type of wood cut, the method of joining and laying out the lamellas, the quality of the polishing of the shield. Furniture boards are coated with a protective varnish . It can be transparent so that the product looks as natural as possible, glossy or with a certain shade - if you want to slightly change or enhance the original color of natural wood.

To get high-quality material, it is better to purchase furniture boards from well-known manufacturers who use high-quality raw materials and monitor compliance with technology.