Glass Matting: How To Make It Matte At Home With Stickers, Liquid And Paint? Chemical Matting And Other Types

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Frosted glass is widely used by designers to create a unique interior. It fills the room with grace and charm. Frosted glasses are used as partitions, in the decor of interior doors, in the bathroom, and they are also amazingly suitable for zoning space, which is very important today. Matt surfaces can be seen not only in residential premises - they are widely used for cafes and restaurants, in shopping malls.

If the old glasses have ceased to inspire, then it is quite possible to modify them with your own hands. How to do this is described in the article.

Basic ways

As a rule, glass matting is carried out in different ways, and it is difficult to say which one is the best. The design of such glass can be anything - artistic, simple, with patterns. For glass processing, hydrofluoric acid can be used. When working with it, they wear protective camouflage: an apron, rubber gloves, a category B gas mask, so you need to prepare for everything in advance.

Let's consider what are the main ways to make glass frosted

With the help of sand

The sandblasting method is widespread in production, and it is considered the main one. Of the advantages, quality and reliability can be distinguished. But it is extremely difficult to call such a method affordable, because special equipment is not cheap (from 7,000 rubles). It's good if someone you know works in production and can lend the device.

The sandblaster allows you to make matting of any depth and density, which is its indisputable advantage. The disadvantages of this method include the loss of glass thickness (about 3 mm), as well as attributes that not everyone has at hand: a respirator and sand.

Before starting work, the glass surface is cleaned, and then the pump is pressed against it . Glass is processed in a circular motion. The process is repeated several times (it all depends on the desired density).

At the end of the process, the stencil is torn off and the surface is simply washed.

Chemical treatment

Often there is a need for a drawing, for example, for wardrobes. For such cases, artistic matting is well suited. This is the second most popular production method after sandblasting. Chemical processing does not imply the purchase of the necessary equipment and a large space for work . For etching the glass surface, hydrofluoric acid is used.

Since acid fumes are poisonous, work must be carried out in accordance with safety precautions. If this is not done, teeth can collapse, the airways become inflamed, and bowel disease will occur.

Artistic glass matting conventionally consists of several stages, including:

• applying a layer (it must be an insoluble acid) on the product;
• removal of the protective layer from those areas that are planned to be made matte;
• applying an etching agent;
• after exposure - rinsing the surface.

The final rinsing follows after removing the protective layer.

Mechanical impact

Mechanical matte technology involves the action of mechanical tools as well as abrasive materials on the surface, resulting in the desired matte effect. The engraving method is very popular. Thanks to the mechanical option of processing the product, any drawings can be applied to the surface - subject compositions, abstraction, clear lines.

Engraving can be done in several ways:

• mechanical;
• manual;
• automated.

The essence of the process is the contact of the cutting tool with the glass. As a result, a groove is formed - the combination of grooves gives an engraving effect. Thanks to engraving, the pattern can be made in-depth or, on the contrary, convex. Another very interesting mechanical method is laser exposure. With the right equipment, experts create creative products.

How to matte with your own hands?

Everyone can make frosted glass at home, the main thing is inspiration and the desire to create, because the final result will depend on this. The purchase of matte surfaces is a rather expensive pleasure, there is no need to pay when you can achieve the desired effect with your own hands.

Spray can

It should be said right away that matting with spray paint is one of the least durable methods. A spray is applied to the surface, creating an opaque film. Surprisingly, the advantage of this option lies in its own disadvantage.

At any time, you can wipe off the coating and apply a new one, refreshing the look.

Step-by-step instruction:

• we dip a cotton pad in pharmacy alcohol, and then carefully wipe the glass;
• a template prepared in advance from a stencil film with an easily removable glue applied to the surface and try to press the stencil to the product as firmly as possible;
• if there are areas on the glass that, according to the idea, should remain unprocessed, they can be covered with unnecessary wallpaper;
• shake the spray bottle thoroughly before applying, and then spray it (keeping a distance of about 30 cm);
• after the end of the process, we remove the stencil and protective paper.

Paste

Matting the surface with a special paste is a very easy way to transform old glass. Despite the safety of the product, it is still advisable to work with gloves, and it will not hurt to ventilate the room in advance. It is worth warning about one thing in advance - the liquid changes the structure of the material, so it will hardly be possible to correct mistakes.

Step-by-step instruction:

• with a cotton pad dipped in alcohol, we degrease the glass - there should not be a speck of dust on the surface;
• we glue the stencil on the product (places that are not planned to be matted can be covered with paper);
• we take a spatula and apply the mixture to the stencil;
• we maintain the time (the exact holding time is indicated in the instructions of each paste manufacturer);
• remove excess paste from the glass or window into a container (the substance can be used more than once);
• for complete cleansing we “walk” over the surface with a sponge;
• remove the stencil.

The product is ready to use.

Matte film

Frosted glass film is perhaps the simplest and least expensive solution. If the matte film is glued evenly and beautifully, no one will even be able to distinguish a fake matte glass. But this is only a temporary solution.

The most popular types of films are matte white and matte gray varieties. On average, the price of a film does not exceed 1,000 rubles per meter.

Step-by-step instruction:

• we thoroughly clean and dry the glass;
• after measuring the product, cut off the required amount of film;
• we separate the material from the substrate (with slow movements);
• place the material from the corner and evenly;
• using a dry cloth, gently level the canvas to remove bubbles.

Stickers

The self-adhesive film is very popular with consumers - of course, because in a matter of minutes you can create glass like in a fashion magazine for interiors. The film comes with a floral pattern, decorative 3D, imitating frosted glass.

Step-by-step instruction:

• first of all, we clean the glass from dust and dirt (for this you can use a special tool or use soap shampoo);
• after measuring the glass, cut out the film (additionally leaving 2-3 cm on each side);
• we apply a soap solution to the glass;
• apply the film to the upper edge of the glass and gently smooth it;
• moisten the outer side of the film with the same agent as glass;
• we expel water and air from under the film, smoothing the product gently on the surface;
• after a while, using a knife, we cut the material where it turned out to be superfluous.

Follow-up care

Care is carried out depending on how the matte effect was achieved. If the changes were created chemically or mechanically, simply wipe the glass with a damp sponge. Even on frosted glass, all stains and dirt will be visible. To prevent the stain from sticking into the product, it must be wiped off immediately after the formation of dirt.

If a strong contamination is found on the glass, you can purchase a product for frosted glass in a store, but it is worth considering that a frosted product is "afraid" of cleaners with fluorine and silicone.

To ensure that frosted glass always remains attractive and serves as a highlight of the interior, it is advisable to regularly carry out maintenance measures . Wipe the frosted glass from time to time with damp natural suede or rinse it with hot water and vinegar. After this treatment, the product is dried.

It will not be difficult to create a cozy atmosphere in your home . One of the listed methods can be tested in practice and renewed old glass. Maintenance steps include the usual wiping of the surface with a cloth. If the stain is serious, it can be removed using a proven method - ammonia.

With the help of matting, you can not only hide from prying eyes, but also create an unforgettable atmosphere. The manufacturing process is very easy, only it is important to follow the instructions, and you will succeed.