2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-07 13:49
Knowing everything about the LabArte engineered parquet board, you can significantly improve the floor in your home. This manufacturer has an oak finish and other solutions. But in order to finally make a choice, it is not enough to study the catalog - you will have to look closely at the reviews.
Peculiarities
The manufacturer of the engineered board LabArte claims that his company is the No. 1 supplier in Russia. About 500 thousand square meters are produced annually. m of floor coverings per year . Therefore, there is no reason to doubt the solid experience and technical perfection of the products. The range of colors of products varies flexibly, as well as their geometry. All manufactured products undergo the required certification.
In general, an engineering board, like any glued material, deforms relatively little . It is appreciated for its excellent geometric stability (compared to other types of parquet). Pure concrete can be used as a substrate, so you can save time, money and effort by not laying plywood under the board. But this requires the most leveled and moisture-insulated base. In addition, it is possible to cover the contours of the underfloor heating system with an engineered board.
It is useful to pay attention to the fundamental properties of any engineering board.
Advantageous properties:
- resistance to external influences;
- simplicity of layout;
- an abundance of options;
- increased level of environmental friendliness;
- excellent thermal insulation;
- protection against extraneous noise.
Cons of products:
- difficulties in repairing single dies;
- inability to reuse blocks;
- high cost;
- unsuitability for the formation of floating floors;
- the need to use products from only one batch (otherwise the combination of shades is violated).
The aesthetic advantages of this flooring material more than cover its disadvantages. The occurrence of cracks and any creaking is completely excluded. The cost of installation work is low. For the production of products, plywood of moisture-resistant grades is used.
Of course, you should pay attention to the assortment of goods.
Coating types
Under the LabArte brand, you can purchase a patinated engineering board. This visual effect is achieved with the help of special synthetic preparations . They are applied using an elaborate technology. As a result, the natural grace of wood is revealed as fully as possible. Modern techniques also make it possible to forcibly age the appearance of the material.
The company's technologists have learned to demonstrate all the beauty of rings, fibers, veins and other components of a natural parquet pattern . Brushing (aging of the material) is also popular. After processing the wood with a steel roller, the surface is deprived of sapwood (outer fabrics) and soft fibers. As a result, the drawing becomes more voluminous. This does not affect the attractiveness and naturalness.
The company can also offer varnished products . Under such protection, the tree will be insensitive to moisture and clogging. The brightness of the color will remain for a long time. Excellent wear resistance is also guaranteed.
The traditional method of finishing wood coatings is used . The material is reliably protected from moisture and dirt. The product is distinguished by its brightness of color and pronounced beauty of the texture. The items are covered with 11 layers of varnish.
The material is durable, strong and wear-resistant.
The collection is presented in three main quality categories:
- select;
- rustic;
- natures.
They are distinguished by color:
-
"Oak" in a variety of options;
- array 15 lacquer-tobacco (technology of special wood finishing);
- plain and varnished ash;
- Resist TRO (four types).
Review overview
The LabArte engineering board is quite controversial. Especially in the area of material cost. There are people who are completely satisfied with such products. In these cases, the full justification of the price is noted.
In general, the floor covering looks good and can last a long time . As for the quality, in some cases, there are some problems with this, for example, on the mismatch of the colors declared. But this more often applies not to the head production in Maikop, but to the branches.
Recommended:
Chipboard Kronospan: Colors And Decors, Sheets Of 16 Mm And Other Sizes, "Anthracite" And "Ash Shimo Light", "Sonoma Oak" And Other Designs, Reviews
Quality characteristics of laminated chipboard Kronospan. What colors and decors are available? Where are sheets 16 mm and other sizes used, decors "Anthracite" and "Ash Shimo Light", "Sonoma Oak" and other designs? What reviews are there?
Engineered Oak Planks: Bleached Natural Oak 1-strip With And Without Coating, 3-layer Light And Gray Oak For Interior Flooring
What is remarkable about an oak engineered board? What is interesting about bleached natural Plank 1-Strip oak with and without coating? What else do you need to know about design, and what are the beautiful examples in interiors?
Color "oak" (85 Photos): Furniture, Which Colors Are Combined With Rustic And Marsh Oak, Sedan And Mocha, Truffle And Other Shades, Windows Of "oak" Color
The color "oak" has many shades. What is its use in furniture and interior design? What colors do rustic oak and marsh oak, sedan and mocha combine with?
Oak Board (21 Photos): Dry Unedged And Planed Board, End Board 20 Mm And Other Sizes, Texture And Colors
Oak board: its features and benefits, texture and colors. Dry unedged and planed boards, calibrated and other types of oak lumber. Where is the 20mm end board and other sizes used?
The Colors Of The Corrugated Board For The Fence (42 Photos): Brown And Chocolate Colors, Red-brown And Other Colors, Shades According To RAL
All about choosing the color of the corrugated board for the fence. Which is better: brown or chocolate? RAL shades overview
