2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
The end profile is used quite often. Customers definitely need to know how to drill a profile for cellular polycarbonate. It is also important to study the information regarding its dimensions and basic installation methods.
What it is?
The end profile is used if it is necessary to prevent the influence of negative natural factors on the edges of the structure. Another function of such an element is to increase the overall rigidity of the assembly. Protection is needed only for cellular polycarbonate. When using monolithic polycarbonate boards, it is optional. If there is no such protection, then the negative impact can be exerted by:
- melt water;
- rain runoff;
- dust;
- garbage other than dust.
Also, honeycomb cavities, being unprotected, are able to attract various insects. Those settle there and can spoil the material. And the appearance will suffer. Soon, polycarbonate degrades, and therefore customers will only have a sharply unfavorable impression.
You will have to put on the end profile exactly on the edge of the surface . Such a covering should completely cover the honeycomb. To ensure increased sealing, special flexible tapes are additionally used.
You can buy such devices in the same place as the profile itself. A perforated tape is also mounted on the underside of the sheets.
Types and sizes
The end profile for cellular polycarbonate can be made of plastic or aluminum. This is a bar that bends like the letter P. One edge of such a product is longer than the other. On sale you can find profile structures up to 2, 1 m long. The usual section is from 1, 5 to 3 mm.
In favor of plastic solutions, they say:
- ease;
- flexibility;
- comparative mechanical strength;
- optimal operational reliability;
- convenience and ease of installation.
An aluminum profile is significantly more expensive than a plastic one. But it serves for a relatively long time - at least 10 years under normal conditions. Basically, aluminum profile is used to protect thick polycarbonate. But you can easily use this product to work with a relatively thin sheet. Typical, as in the previous case, the letter P.
In some cases, not aluminum or a standard polymer is used, but transparent plastic, which looks much more aesthetically pleasing than the usual version. You can easily pick up options with other colors. A very important property is the linear dimensions of the profile. Its thickness exactly matches the dimensions of the most common polycarbonate grades, amounting to:
- 4 mm;
- 6 mm;
- 8 mm;
- 10 mm;
- 16 mm.
Where is it used?
Do not think that the end plate is needed only for polycarbonate. This product is also useful for working with other materials. The main goal is to protect the space under the roof from the ingress of foreign objects and any debris . In this case, the end profile can be used for both metal tiles and corrugated board. Such structures are made from durable steel grades.
As in the case of polycarbonate, the thickness of the expansion elements must correspond to the thickness of the base material.
Installation methods
Often in different sources you can read that the end profile is worn last. For this, pre-left gaps are used. It is believed that such an installation, due to a narrow edge having an acute angle to the plane of the profile itself, guarantees the most firm pressure on the sheet . It is best to orient such an edge outward. The widened edge fits under the sheet exactly in the interval from polycarbonate to cladding.
The next step is to apply a spatula . One of its corners is gently inserted inside and gently pry on the still free part of the narrow edge. It is slightly folded back. Next, you need to press on the polycarbonate sheet. This work is carried out in several areas in succession.
When using a docking non-separable profile, it must be borne in mind that these are two end devices connected to each other. Working with it is the same as described above. The spatula again helps to simplify installation. There are also detachable connecting elements. They are twice as expensive, but they simplify installation several times.
In some cases, for the installation of the profile, polycarbonate must be drilled . Such work is successfully performed with the simplest electric drills or screwdrivers. The drilling itself is carried out with standard drills for metal. It is necessary to pierce the sheets strictly between the stiffeners, without falling on them, in order to avoid problems.
The distance from the edge of the sheet should be at least 40 mm, the angle of entry of the drill - from 90 to 118 degrees; working speed - maximum 40 revolutions of the drill per minute, so that the polycarbonate does not melt.
Recommended:
Dimensions Of Polycarbonate: Standard Width Of Sheets Of Cellular Polycarbonate And Others, Thickness And Length Of Polycarbonate Sheets
Polycarbonate is a sought-after material that combines high strength with transparency, flexibility and light weight. What are the dimensions of polycarbonate according to GOST? Standard width of sheets of honeycomb, molded, profiled polycarbonate and others. What does the panel thickness affect? How to choose the right size for your roofing, shed or greenhouse?
ADA Motor Drill: Ground Drill 7 And Ground Drill 5, Ground Drill 8, Ground Drill 2 And Ground Drill 9 Gas Drills, Adapters For Hole Drills
Motor-drill ADA. Ground Drill 2, Ground Drill 5, Ground Drill 7, Ground Drill 8 and Ground Drill 9 Gas Drills
Cellular Polycarbonate (46 Photos): Fasteners And Manufacturers. How To Cut Cellular Polycarbonate? Production, Characteristics Of Transparent And Colored Material
Cellular polycarbonate - technical and operational characteristics of the material, the best manufacturers. Features of the production of cellular polycarbonate. How to cut plastic polycarbonate, how to choose fasteners for it?
Installation Of Polycarbonate: How To Attach It To The Metal Frame? Methods For Fixing Cellular And Other Polycarbonate, Through What Distance To Fix
What are the rules for polycarbonate installation? How and how can you attach it to a metal frame? What other frame can there be for mounting sheets? What fastening methods are there? What parts are needed for high-quality polycarbonate fixing?
Polycarbonate Tapes: Perforated Protective Tapes And Thermal End Sealing Tape For Cellular And Other Polycarbonate
One of the most important building materials is polycarbonate tape. What is it used for? What are the main characteristics of the material?