Connecting Strips For Tabletops (27 Photos): Connection With Docking Profiles 26-38 Mm, Corner And T-shaped Strips

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

The article describes the basic features of connecting strips for tabletops. The connection is characterized by docking profiles 26-38 mm, corner and T-shaped strips. The main types of such devices are reflected.

Description and purpose

From time to time, when arranging dwellings and during major repairs, people try to update the furniture. At the same time, it often has to be modified. This also applies to kitchen sets and their component parts. You can do this work with your own hands without any problems. Of course, for this you need just the connecting strips for the countertops.

Such products are designed, as follows from their name, to connect the heterogeneous parts of the structure . It should be noted that the docking assistant, along with a purely practical function, is also responsible for the aesthetic filling of the space, no less. Where they are installed, the edges do not crumble or swell from water droplets and vapors. Similar products are placed at the joints; they also usually decorate the corners of furniture.

Planks should be purchased in the same place where the furniture itself was purchased. This significantly reduces the risk of error and technical oversight. It is recommended not only to get acquainted with the catalogs, but also to consult with specialists. In favor of special connecting products, they say:

• attractive appearance;
• excellent resistance to corrosion and mechanical damage;
• long period of operation;
• suitability even for wet conditions, for contact with sharp objects and with caustic, aggressive substances;
• compatibility with postforming worktops.

What are they?

Corner profiles play an important role in the range of modern manufacturers. Of course, they are used to tie parts of the tabletop mechanically butt at a certain angle. The name "docking" is usually assigned to an element mounted at right angles and performing an increased decorative role . The end product covers the initially uninsulated end and prevents the negative impact on it from the external environment. The thickness and radius of a particular variant are always of key importance in the selection.

But it is always necessary to clarify what exactly the manufacturer or supplier means under a certain position in the catalog / contract, check or price tag (label). So, slotted strips are simply an alternative name for connecting profiles . It's just that the terminology in this area is not yet well established, and there is no need to rely on uniformity of names. Another example is that the concepts of wide and narrow bars have little to say to the consumer.

You should always be interested in what specific size is meant, otherwise problems when trying to use the purchased product are inevitable.

The T-shaped model has an important specific feature - it provides the most accurate and careful connection of the tabletop parts. Even if these parts are very heterogeneous in terms of geometry and mechanical qualities, the creation of a coherent composition is guaranteed. Most often, profiles are made of aluminum alloys, since it is such a substance - not ferrous metal, not plastic or stainless steel - that has a number of important advantages:

• chemical inertness;
• ease;
• durability;
• reliability;
• pleasant appearance;
• resistance to high and low temperatures, water vapor, fats and organic acids;
• hypoallergenic.

Important: all this is even more characteristic of products made from anodized aluminum. True, it will cost a little more.

A very relevant characteristic is the size of a particular bar. You can often find structures with a thickness of 26 or 38 mm . In many cases, such products have a length of 600 mm - and a similar ratio of dimensions was chosen by engineers on the basis of familiarity with the practice of use, with reviews.

But many companies are ready to offer profiles of other sizes. So, regularly in the catalogs of furniture companies there are strips with a thickness of 28 mm . It can be simple connecting, and end, and corner structures. But models with a size of 42 mm usually need to be ordered additionally - they are a rarity in manufacturers' catalogs. However, with the modern variety of furniture workshops, this, of course, is not a problem.

Importantly, a rounded bar, regardless of size, is the safest . This property will be most appreciated by those who have small children at home. However, even for the most brutal adults, an extra collision with a sharp angle is unlikely to cause positive emotions.

In conclusion, it is worth considering the topic of coloring the connecting strips. Like the countertops themselves, in most cases they are black or white. But the choice of users does not naturally stop there.

So, in spirit-neutral interiors, many users consider beige to be the best solution . It optimally suits the "kitchen" mood and does not excite the nerves too much. The sand color is suitable for rooms with light wooden facades. It is also good where the decoration is different, but there is a lot of light.

Other main options:

• metallic - for practical people who love to cook in their kitchen;
• dark brown color - expressive juicy contrast in a very light interior;
• green (including both grassy and light green) is an excellent choice for romantics, for families with children, for those who are not used to being discouraged and upset;
• red - a bright accent against the background of a white or moderately dark headset;
• orange - an excellent combination with brown or other moderately saturated color of furniture;
• pink - creates a spectacular and at the same time devoid of any aggression mood;
• oak - expresses tradition, solidity and respectability;
• a milky white shade is suitable for diluting a very dark-looking kitchen.

Countertop connection

Required tools

Whatever the type and color of the bar for the countertop and the countertop itself, it will have to be carefully mounted. Connecting a pair of chipboard canvases is the only option for obtaining an angular structure. For work, you will need, in addition to the bar itself:

• a pair of clamps (ties) for the countertop;
• silicone-based sealant (colorless composition is recommended);
• household electric drill;
• saw for metal;
• drills for metal;
• Forstner drills of various sections;
• Phillips screwdriver or screwdriver;
• 10mm wrench;
• pliers;
• stationery pencil (the hardness of the lead is not important);
• a soft waste cloth to wipe off excess sealant.

Technology

Let's say you want to join a couple of chipboard canvases at an angle. In this case, a “no segment” connection can be practiced. Just 2 plots are placed on the kitchen cabinet at a right angle . But docking can also be done "via segment". This solution is more cumbersome. They resort to it so that you can put a corner cabinet.

In any case, the joint should be as tight as possible . The smaller the gap separating the ends, the better. Of course, it is difficult to achieve this result on oval or rounded countertops. But even in this case, it is not necessary to call the installers. You can simply install a special corner connector - its cost is much lower than the cost of the services of a specialist (who, moreover, will most likely take a similar product).

A more aesthetic option for installing prefabricated worktops is to fix them using the so-called Euro-sawing method . This approach is suitable for products regardless of the shape of the edge. In this case, the plank will rather have an auxiliary and decorative role. It will only provide additional reliability for the bundle of elements. The main fixation will be taken by the sealant and wood glue.

But Eurozapil is rarely used due to its high cost. In most cases, functional abutting profiles are still used . Before you mark the position of the clamps, you need to make sure that the mount does not interfere with the installation of the equipment in the tabletop. And not only technology, but also a built-in sink.

Sometimes the seam is located near the hobs, and then at the bottom of them there are brackets for bottom mounting; it is also useful to remember about fixing them.

One more circumstance - even in the presence of several screeds, the prefabricated product will definitely yield to the monolith in terms of rigidity. Therefore, below the tabletop will have to be firmly propped up. After marking the tie points, you will need to attach the connecting strip to the end of the tabletop . Next, future new slots are marked with a pencil. Cuts along the lines will help you make a saw for metal.

Further, the internal excess is broken off with pliers. Using a hacksaw, saw off the bar to the desired size, leaving only a margin of 1-2 mm. Last but not least, they care about the reliable immersion of the self-tapping heads. They should go flush into the bar; if this is not provided automatically, additional countersinking is used. Next steps:

• with a 35 mm Forstner drill clamped in a drill, blind holes are knocked out to a predetermined depth, which guarantees the placement of the clamping pin exactly in the middle in thickness;
• having prepared blind holes, make holes in the tabletop for studs by 8 mm;
• for the sake of increased accuracy, this hole is passed sequentially with a pair of drills;
• open longitudinal grooves are prepared in the countertop;
• tighten the connecting strip on the tabletop with self-tapping screws;
• cover the bar with sealant;
• insert the pin into the groove and into the hole of the mating part;
• evenly (in turn) tighten the parts of the tabletop with a wrench;
• as soon as the sealant begins to bulge, the pull-up is stopped, and the stain is wiped off with a cloth.