DIY Mini Drill: How To Make A Device From A Motor According To The Scheme? Homemade Hand Drill From A Blender At Home

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

For small work, in particular, the manufacture of electrical microcircuits, a drill is needed. An ordinary electric drill will not work. It is known that a lot of necessary and useful tooling for a home workshop can simply be created with your own hands. One of these curious homemade products is the mini drill.

Having rummaged in old supplies, it is quite easy to find motors from all kinds of household electrical appliances or toys. All other elements necessary for activity can also be found among old objects.

Scope of application

The mini drill is widely used for various tasks.

• Making holes in plastic, circuit boards for microcircuits and other objects … Of course, the device will not be able to drill through thick iron, but to make a hole in a sheet up to one millimeter thick, there will be enough strength.
• Fastening and Unscrewing Small Hat Screws and Threads … Such fasteners come across mainly on automatic machines (switches), electrical wiring boards, in office equipment, as well as in small-sized low-power electric motors.
• Equipped with special attachments, it can be used as an engraver or grinder , for this, spherical nozzles with a rough working plane are placed in its cartridge. During rotation, the nozzle processes the part or applies the required pattern.

To improve the result and not overheat the surface, it is advisable to use an oil emulsion that minimizes the friction force.

These are the main areas where the mini drill is practiced, but apart from them, it has found extensive use in everyday life, for example, for processing (cleaning) two glued objects made of plastic or glass … When preparing the joints, both products are cleaned, after which the surfaces are adjusted so that the pieces are closely adjacent to each other.

What to make?

There may be several options for making a mini-drill made by yourself. Your imagination is constrained solely by the availability of the necessary ingredients. A portable drill is considered optimal ., made with your own hands from an engine from electrical appliances. Engines from a wide variety of devices can be used.

Let's list some of them

Hair dryer … This option will be the best, since the resource of the motor from the hair dryer is quite enough for the drill to be able to carry out all its basic tasks. The limiting number of revolutions per minute for this motor is 1500-1800.

Audio recorder … Due to the fact that the power of the motor of the audio tape recorder is extremely small, the only thing that can come out of this idea is a drill for the boards. The motor is powered from 6 volts, which means that you will need to find a suitable charger or battery.

Fishing rod reels … A small drill can be made from a simple ouda reel. Its design will be used as a motor, and by manual rotation it will drive the chuck with the drill. The advantage of this method is the ease of creation and the absence of the need for power from a battery or electrical network.

Radio Controlled Toys … Engine power depends on the manufacturer. Chinese consumer goods are mostly equipped with weak motors. Examples of famous brands such as WLToys, Maverick or General Silicone are equipped with high quality, durable and, most importantly, strong motors.

The mini-drill assembled on this basis will simply "fly".

From a blender covered with dust somewhere in the bins, you can also make such a useful device as a mini-drill or engraver.

Since we do not have to "reinvent the wheel", since the blender already has its own body and electric motor, we have made a separate description of how to make a drill from this device at home.

So, we need:

• casing and electric motor from the blender;
• drill collet (should be purchased at a building materials store);
• switch or button.

The scheme for creating our homemade product is as follows:

• disassemble the blender body;
• we insert the switch into the case, then we connect it to the electric motor;
• now we need a collet chuck, we put it on the motor axis;
• make a hole in the casing to match the size of the clamping device;
• we assemble the casing, and our homemade mini-drill is ready for use;
• install a drill or an engraver attachment into the clamping device and use it.

It should be noted that the electric motor of the blender is not designed for long-term operation, therefore it must be turned off from time to time so that it does not overheat.

However, such a device is quite enough to carry out simple work, for example, drilling holes in the boards or engraving parts.

Clamping mechanism

The next important component of the device is the chuck used to hold the drill. To make a clamping device, you must purchase a collet in advance .… It is a clamping device capable of firmly holding cylindrical objects. After fixing the drill in the collet chuck and clamping it tightly on the motor axis, you just need to connect a power supply device or batteries to the motor.

A similar simplified version of a mini-drill is already capable of drilling holes.

If you have no desire to further burden yourself, and you will not use the tool very often, you can leave it as it is.

However, holding the "naked" motor in your hands is uncomfortable, and the mini-drill looks unattractive. To get started to the finish line, you need a shell and separate control components.

Shell options

If, in order to make a clamping device, it will be necessary to go to Aliexpress or another similar portal in search of a collet chuck, everything is much easier with the casing. To create it, rubbish will do, which, as usual, is thrown away.

Let's look at several variations

Antiperspirant Deodorant Bottle … Individual containers made of plastic perfectly fit the dimensions of the motor from an audio tape recorder or a CD player. In a situation where the engine is slightly larger, insert it with a slight stretch. In the lid of the antiperspirant bottle, a hole must be cut to remove the collet. For greater practicality, at the very bottom you can put a socket for connecting a power source, and on the side there is an on / off button. This makes it possible to keep the drill away from the block.

Holder for connection of incandescent lamps … The option, of course, is of little use - it will not work to make a hole in such a strong plastic, therefore, the power button will need to be fixed on the shell with glue.

The back cover can be made from a soap bubble container.

The tube is the correct size . Any material will do - steel, plastic or rubber. True, not as neat as the options listed above. Do not forget that when fixing the motor to the casing, there should be no gaps, otherwise the drill is likely to run out during operation. Cold welding or superglue may be used for auxiliary fixation.

Power and control components

It's great if you have a power supply with a controller of incoming power - this will make it possible to change the speed of the drill during operation. If you use an ordinary power supply, for even greater comfort, it is advisable to install a power button on the casing. Can be used as a 2-position switch (on / off) and an interrupter - it depends on your tastes. It would not hurt to equip the shell with a plug suitable for the power supply.