2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09
German products have long established themselves on the international market as high quality and durable. So, perforators from Kress have been used by masters since the distant 80s. Among the main characteristics of this equipment are low cost, low noise level during operation, versatility, powerful engine, stylish design, and, of course, durability.
General specifications
The manufacturer presents a choice of several models of equipment that differ in power - the range from 550 to 1050 watts.
The drill diameter is selected depending on the material to be processed:
- 30-50 mm - wood;
- 13-16 mm - metal;
- 20-28 mm - concrete.
The main part of modern Kress rock drills is endowed with a reverse mode, allows you to switch speeds, adjust the rotational speed. It is important that the system has an additional function - hammer drilling.
Some types of instrument, for example, 800 PSE QuiXs Set, equipped with a drilling mode where the bit is involved … The hole width in this case reaches 70 mm. This unit weighs about 3 kilograms.
Models and cost
There are several popular device models.
Kress 650 PE
The price varies from 5,000 to 7,000 rubles. The instrument of this model is equipped with a strong motor (650 W). The complete set has been updated with the innovative SDS-Plus chuck, as well as operating modes: chiseling, drilling (with and without impact). The number of revolutions per minute is approximately 1,100, 4,800 / min is the impact frequency. The maximum impact energy is 1.8 J. So, in wood blanks, you can make a hole about 35 mm wide, metal - 13.
The set also includes:
- fixing spindle;
- automatic rotation control;
- reverse;
- drilling depth stop;
- safety clutch;
- switch lock;
- spare set of handles.
The total weight of the tool is 2, 3 kg.
Kress 1050 PXC Set 04283503
The price of this equipment is 9,700 rubles. The main purpose of the tool is chiseling and drilling. The hammer drill is equipped with a powerful mechanism (up to 1050 W).
It, in turn, allows holes up to 16 mm in diameter to be drilled even in steel plates. In addition to everything, the manufacturer has endowed this model with full-wave electronics with a tachogenerator.
This feature will allow you to independently regulate, as well as maintain the number of revolutions in action.
The device operates at two speeds: the first is suitable for drilling using large drills, the second - using smaller sizes. The gearbox is made of high quality steel using the latest technology. This feature ensures reliable and long service life of the rock drill.
Model Description:
- the presence of a reverse;
- ability to turn brushes;
- 4 meter power cord;
- holes (in millimeters) - wood (50), concrete (28), brick (using a crown - 45), metal (16);
- adjustable speed;
- 4,700 strokes / min.;
- the presence of a drill chuck;
- there is no vibration protection;
- weight - 2, 8 kg.
Kress 800 PE 04284301
The cost of the model is 5,900 rubles. The principle of operation of the tool is based on a motor with a power of up to 800 watts. The tool is purchased for drilling or slotting work with various types of surfaces.
As buyers note, the handle of this punch is very comfortable, which allows you to hold it in your hands for quite a long time. In addition, the low weight greatly simplifies the workflow.
Equipment:
- safety clutch;
- reverse;
- 4 meter cable;
- control electronics;
- impact force - up to 3 J;
- maximum hole width - 35 mm, in metal - 13;
- lack of vibration protection function, drill chuck.
Advantages and disadvantages
According to the reviews of the owners of German Kress instruments, the pros and cons of this equipment can be highlighted.
First, let's look at the advantages of the devices
- Availability of a network cable module retainer. Even with the power off, you will not worry about the device suddenly working, and you can easily change accessories and attachments.
- There are additional handles, keyless chucks, bit adapters. This configuration allows you to use the equipment as a drill, mixer, or screwdriver.
- High quality, reliability. The equipment can work for about 10 years without repair. However, frequently used parts can wear out. Most of the breakdowns occur as a result of improper use or storage of the tool. Experts advise using only original and high-quality parts from the manufacturer.
- Powerful engine, versatility. It lies in the ability to make even holes, without cracks, crumbling (even in wood and strong concrete).
- Low cost. On average, for 6,000 rubles you can buy a good German hammer drill, which will last for many years and will also provide safe, durable work.
- Convenient case. The special case contains everything you need. It is so capacious that in addition to the main device, there are additional parts here. Such storage allows you to keep the entire set safe, protect it from moisture, dirt, and other damage.
According to experts, the main disadvantage of the German Kress puncher is the network cable. According to the experience of workers, it lasts for several years, after which repair or complete replacement is required. In addition, users often complained about a jammed striker piston, as well as a worn out battery.
In general, all the tools of the German company Kress are excellent choices for working with various types of surfaces. You can buy equipment in official stores in Russia, where original, high-quality products from Germany are supplied, which cost little money.
The manufacturer guarantees its customers durability, safety, as well as a good result of drilling and slotting work.
Recommended:
Ultrasonic Humidifier: How To Make It Yourself? Pros And Cons, Principle Of Operation And Rating Of The Best Models 2021, Reviews
Ultrasonic humidifier: what is it, what are its pros and cons? What is the working principle? What is the ranking of the best models of 2019? What reviews are there? Can you do it yourself? How to choose the right model?
Inkjet Printers (47 Photos): What Are They? Pros And Cons Of Color And Black-and-white Printers For Home, Principle Of Operation And Characteristics
What are inkjet printers? How are they different from their laser counterparts? What are the pros and cons of color and black and white printers for the home? Can you use them in the office? There are many questions regarding inkjet devices, and for each of them there is a clear answer
ADA Motor Drill: Ground Drill 7 And Ground Drill 5, Ground Drill 8, Ground Drill 2 And Ground Drill 9 Gas Drills, Adapters For Hole Drills
Motor-drill ADA. Ground Drill 2, Ground Drill 5, Ground Drill 7, Ground Drill 8 and Ground Drill 9 Gas Drills
Drill And Hammer Drill: What Is The Difference Between A Hammer Drill And A Hammer Drill And What Is The Best Choice For The Home?
What kind of work is the drill used for? Why might you need a hammer drill at home? What is the difference between a hammer drill and a hammer drill? Which tool is the best for home renovation?
Wood Auger Drill: What Is It? The Design Of The Lewis Spiral Drill, The Principle Of Its Operation And Features Of Operation
Wood auger drill, what is it and where is it used? How does the Levis spiral drill design differ from other drills? All this in our publication