Blaupunkt Screwdriver: Model Varieties, Tips For Choosing And Using A Screwdriver-drill And Other Models

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

A screwdriver is a fairly popular device. This equipment can often be found not only at construction masters, but also in home use. The Blaupunkt brand screwdriver is of great interest.

What it is, what model is produced under this brand, and how to properly operate the Blaupunkt screwdriver, let's figure it out.

About the manufacturer

Blaupunkt is a German brand that is renowned for its high quality technology known all over the world. Among the products that are produced under this brand, you can find small household appliances, beauty and health devices, audio goods, as well as drills and screwdrivers.

Models

Since the production of construction equipment is a non-core activity of Blaupunkt, then only 1 model of BPPT-001 screwdriver is produced under this brand.

It is a battery-powered drill driver. This device is quite compact, weighing only 1.1 kg. The battery is installed lithium-ion, there is no spare battery in the kit. Its capacity is 1, 3 A * h, the voltage it gives out - 10, 8 V. The maximum rotation speed of the bit at idle speed is 1300 rpm. You can choose from 17 modes, choosing the right torque for you .… The device is quite noisy, the acoustic indicator here is about 85 dB.

The screwdriver has an illuminated nozzle, so it is convenient for them to work in dark places. Equipped with a reverse button.

It can also drill holes in a variety of materials. The diameter of the swell here should not exceed 10 mm.

Features: advantages and disadvantages

The Blaupunkt screwdriver has several advantages.

• It is small in size and fits easily even in a woman's hand.
• Equipped with a rubberized handle, non-slip, quite ergonomic.
• The quality of Blaupunkt products is at the highest level, all products are manufactured under the strictest control. The German brand speaks for itself.
• The warranty period of 12 months will allow you to eliminate the problem at the expense of the manufacturer, if any arise. There are several service centers in Russia where you can repair the device.

But this technique has its drawbacks

• Not all cities have official repair shops, so the repair period can be delayed.
• The absence of an additional battery reduces the operating time of the device, which means that it is unlikely to be suitable for a professional, or you will have to buy an additional battery.
• The total cost of the device, excluding stocks, is quite high, for a similar price you can buy a more professional screwdriver.

How to use?

The Blaupunkt screwdriver is easy to use. Even a completely inexperienced person in the construction business can tighten a screw with this device.

After buying in first of all you need to charge the battery pack … To do this, it must be removed from the screwdriver by pressing the special buttons until it clicks and pulling the battery. After removing the battery, insert the charger into the special hole on the battery, and only then insert the plug into the outlet.

It is necessary to fully charge and discharge the battery the first few times to gain maximum power. Maximum charge should not exceed 5 hours … But even afterwards, short charging cycles should be avoided, it is better to achieve a complete shutdown of the device, then connect the battery to the network and fully charge it. In this way, the life of the battery can be extended.

The battery is installed easily, simply slides into the handle until it clicks.

The next step is to set the required bits. To do this, you must first make sure that the power button is locked. Then hold the back of the chuck and turn the front disc. Now you can insert the required bit into the hole, this must be done until it stops. After the nozzle is installed, tighten the chuck by hand. Try to pull out the bat. It should be well fixed ..

Next, the speed of the device is set using a button in the upper part of the screwdriver, as well as the required torque using a disk located near the cartridge.

At the last stage, the direction of rotation is selected , for this, the switch above the trigger is moved to the appropriate position. The device is ready for operation and you can turn on the start button.

Safety engineering

In order for the Blaupunkt screwdriver to work for a long time, and its operation was safe for others, the following safety rules must be followed:

• do not touch the terminals of the charger plugged into the outlet with your hands;
• do not allow moisture to get on the equipment;
• store the screwdriver at a temperature of +40 to 0 degrees;
• store the battery separately from the device itself if you do not use it for more than one day;
• do not allow the battery terminals to come in contact with metal objects;
• when working, use goggles and a mask to protect the respiratory system and eyes from dust;
• Please note that the device has a magnetic field and may interfere with medical equipment such as pacemakers.

Reviews

Since the Blaupunkt screwdriver is represented by only one model, there are not so many reviews about it. But those who bought this device speak of the good quality of the product. Its power is quite enough for using the device both as a screwdriver and as a conventional drill.

But still the cost of this equipment is slightly overpriced … Buyers say that on the market you can buy screwdrivers with the same properties at a more attractive price, and finding replacement batteries for this device is very difficult.