Tape Screwdriver: Characteristics Of Models With Automatic Self-tapping Screws. How To Choose A Screwdriver Attachment?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10

The tape screwdriver makes it faster and more convenient to complete the tasks of installing self-tapping screws. This mechanism will be especially appreciated by those craftsmen who have to work in hard-to-reach places, for example, in a corner, behind furniture or on the ceiling, or screw in a large number of screws at a time.

Description

The tape-type screwdriver allows you to quickly perform volumetric work of the same type due to the presence of a tape with self-tapping screws attached to it. The tape screwdriver with an automatic feed of self-tapping screws can be battery or electric. The first type is quite compact, it is convenient to carry it from place to place.

However, when the battery starts to run out, it slows down. Operation under such conditions can damage the device altogether. In this case, you will have to immediately change the battery, which is always recommended to keep in reserve.

The mains screwdriver is charged from an electrical outlet. As a rule, it is limited to a fairly short wire. therefore it is always advised to purchase an extension cord in the kit.

Screwdriver motors can be brushed and brushless. Professionals use the latter, since the work in this case turns out to be uninterrupted, smooth and without unnecessary noise accompaniments. The distance between the self-tapping screws fixed on the tape is the same.

Therefore, the fasteners are screwed exactly and exactly over the bat into the intended target. In addition, it is often possible to adjust how deep the screw is screwed in. The body of the device is usually made of aluminum, in some cases with plastic parts. The tape attachments are removable.

It is important to mention that tape screwdrivers come in two versions. In the first case, the self-tapping screw feed mechanism is attached to the body and is stationary. Without a tape, it will not work at all .… In the second case, the nozzle is removable, which allows, if necessary, to remove it and use the device as usual - screw the screws one by one one by one.

Of course, the second option is more economical, since you can purchase a conventional device and complete it with several nozzles.

Appointment

The essence of the tape screwdriver is that in a short time, a specialist can screw several dozen fasteners placed on a special tape. The technician does not have to use his free hand to take out new screws and install them at the required point, as it will be enough to simply press a button. With the free hand, you can fix the processed material.

The device is used by both professionals and households.

Top Models

The most demanded manufacturers of tape screwdrivers include Makita firm … This manufacturer supplies the market with both network devices and those that work with a battery. They are able to operate with various fasteners, therefore are especially popular with professional craftsmen.

Makita creates devices with high performance as well as dust protection. Some models work not only with self-tapping screws, but also with real screws due to the enlarged rod part. In this case, work can be carried out in hard-to-reach places.

Another quality manufacturer is Bosch, the main advantages of which are high quality and "lifting" price.

The screwdrivers are equipped with a comfortable rubber-coated handle, high-speed motors and an open housing to keep dust out. It is impossible not to mention about Hilti , the screwdrivers of which have a high-quality battery with a long service life, protection against twisting, two types of tapes for forty and fifty self-tapping screws, as well as a spare battery.

Subtleties of choice

The choice of a tape screwdriver is for the most part carried out in the same way as the choice of a conventional device - in terms of technical characteristics. Of course, the power of the equipment is important, which is directly related to its performance. The higher the first indicator is, the more efficient the work will be. The power of network devices depends on the required amount of energy, and for those equipped with a battery - on the characteristics.

The torque is also important, which is responsible for the force with which the self-tapping screw will be screwed into the surface. If the device is to be used only at home, then the torque parameters should vary from 10 to 12 Nm … It is also worth considering the speed. Of course, in the case of a tape screwdriver, the attachment must also be taken into account, allowing you to work with a certain type of fastener.

Advantages and disadvantages

The auto-feed screwdriver has many advantages.

It is possible to work with self-tapping screws that differ in diameter and shape. However, it should be mentioned that only expensive tools have attachments included in the original kit … In the case of more budget options, you have to buy them additionally.

The work is carried out not only quickly, but also easily - fragile materials are not injured. For example, using a screwdriver, it will be possible to screw the screws even into drywall without violating its integrity. In this case, there is no need to calculate the contact force

The use of a screwdriver will be convenient even for people who do not have outstanding physical qualities, since you will not have to make any special efforts. It is enough just to press the button.

• Self-tapping screws in this case do not disappear anywhere. They can be stored in one place without any problems, they do not need to be laid out in your pockets.
• In one minute, it will be possible to tighten up to fifty self-tapping screws, while a conventional device can handle a maximum of ten. By the way, there may be more fastening material in the tape - it all depends on the type of tape.
• It is worth mentioning the versatility: if you have a tool from one manufacturer, it will be quite possible to equip it with ribbons of other brands.
• The band screwdriver has a low noise level.

The ease of use of the device should be noted separately.

The matching handle keeps your hand from fatigue and can also be attached to your belt. The buttons are well located, easy to press, and the tapered nose of the device that advances the tape makes it possible to place the corner screw as close to the wall as possible. If the screwdriver is also a cordless one, then the work is greatly simplified, since you can retreat to any distance, climb a ladder and not be afraid to catch on the extension cord.

A rather subjective disadvantage is the need for regular procurement of materials, including feed tape. In addition, frequent use leads to constant discharge of the battery or high consumption of electricity.

Principle of operation

A screwdriver with self-tapping screws looks like an automatic machine with a clip of screws. Typically, the device is immediately equipped with several attachments, allowing you to work with self-tapping screws of various sizes. The work is carried out due to the fact that on the main part there is a special compartment where fasteners are laid.

When the strap screwdriver is activated at the push of a button, one of the self-tapping screws is immediately used as intended. In this case, the compartment starts to move, and the place of the retired "cartridge" is immediately taken by a new one. Such a system greatly simplifies not only operation, but also the storage of self-tapping screws, for which there is no need to look for a special place.

The tape screwdriver with an automatic self-tapping screw can be recharged both from a self-contained battery and using a regular outlet.

It turns out to regulate the pace of work, which becomes either calmer or faster. As a rule, devices from trusted manufacturers have a long warranty period, are sold in all large specialized stores and are supplemented with spare parts or consumables without any problems.

Some even have a special function to protect against twisting and damage to the walls . or other materials used as a base. This explains why most of the craftsmen still prefer well-known brands.

Operating rules

Although it is not difficult to use a tape screwdriver, you should still adhere to some operating rules. For instance, a very hot appliance signals that it must be turned off immediately and allowed to cool … The reasons for this condition can be two factors: either a faulty part, or too long operation of the screwdriver at maximum power.

It is not recommended to disassemble the device on your own. It is better to contact a specialist to troubleshoot … The only thing you can do at home is to refuel a new tape. This should be done accurately and accurately.

When activating the screwdriver, it is important not to forget to first check if there are charged screws.

It is categorically not recommended to turn on an empty device, since this type of work significantly worsens the condition of the device .… When the fasteners in the tape run out, the device is turned off by pressing the corresponding button. It is also important to mention that using an unsuitable attachment may damage the device … Both the diameter and the shape of the self-tapping screws must always match the holes in the nozzle.