Brushless Screwdriver: Advantages And Disadvantages Of A Brushless Screwdriver

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Cordless screwdrivers have become in demand due to their mobility and capabilities. The lack of dependence on a power source allows you to solve much more construction problems.

What is a brushless motor

The development of semiconductor electronics in the 1970s led to the realization that the commutator and brushes should be eliminated in DC motors. In a brushless motor, an electronic amplifier replaces the mechanical switching of the contacts. An electronic sensor detects the angle of rotation of the rotor and is responsible for monitoring the semiconductor switches. The elimination of sliding contacts has reduced friction and increased the service life of the screwdrivers.

Such a motor provides higher efficiency and less susceptibility to mechanical wear. Brushless motors have several advantages over brushed motors:

• higher torque;
• increased reliability;
• noise reduction;
• long service life.

The insides of the motor can be completely closed and protected from dirt or moisture . By converting electricity into mechanical force, brushless motors are more efficient.

The speed depends on the voltage, but does not depend on the centrifugal force, and the motor operates in the set mode. Even with current leakage or magnetization, such a unit does not reduce performance, and the rotation speed coincides with the torque.

When using such a motor, there is no need to use a winding and a commutator, and the magnet in the design is characterized by a small mass and size.

Brushless motors are used in devices whose power is in the range of up to 5 kW. It is irrational to use them in equipment of higher power. Moreover, the magnets in the design are sensitive to magnetic fields and high temperatures.

Brushless screwdriver: the principle of energy generation

The brushless screwdriver has a motor of the type described, its difference is that the current is switched not in the rotor, but in the stator windings. There are no coils on the armature, and the magnetic field is created by means of magnets installed in the instrument structure.

The moment when the power supply is needed is determined by special sensors . Their work is based on the Hall effect. DPR pulses and the signal of the speed regulator are processed in the microprocessor, as a result of which they are formed. In professional language, they are also called PWM signals.

The created pulses are sequentially fed to inverters or, more simply, amplifiers, which increase the current strength, and their outputs are connected to the winding located on the stator. These current amplifiers are designed to switch the current occurring in the coils, according to the signals that come from the microprocessor unit. As a result of this interaction, a magnetic field is formed, which enters into connection with what is around the rotor, as a result of which the armature begins to rotate.

Advantages and disadvantages

Among the advantages are:

• The ability to adjust the speed. At the same time, the user has a wide range of settings for this indicator, depending on the work performed and the working surface.
• In the design of such a unit there is no collector-brush assembly, therefore, the tool breaks less often when used correctly, and maintenance does not cause problems.
• The screwdriver is better able to handle heavy loads associated with increased torque.

• Battery energy is consumed economically.
• The efficiency of such equipment is 90%.
• The ability to use the screwdriver in a hazardous environment with the presence of an explosive gas mixture, since there is no arcing.
• Miniature dimensions and low weight.
• The same power is maintained in both directions of operation.
• Even an increased load does not cause a decrease in speed.

Flaws:

• Impressive value.
• The large size of the screwdriver, which makes it difficult to work with an outstretched arm and in hard-to-reach places.

It is very important to pay attention to what type of battery is in the design of the tool. If you choose the right brushless screwdriver, it will work for a long time and will delight you with its performance.

Comparison of collector and brushless tools

As already noted, the efficiency of brushless motors is higher and amounts to 90%. In comparison with them, collector ones have only 60%. This means that with the same battery capacity, the brushless screwdriver will work longer on a single charge, which is very important if the charging source is far away.

Dimensions and weight are also better for the tool with a brushless motor inside.

In this regard, we can say that the described equipment is much more efficient, but the user is often stopped by its cost. Since any, even the most expensive, tool breaks down sooner or later, most prefer to work with cheap Chinese products. But if you want to take a unit that will last a long time, then you should know the basic selection criteria that a modern user should rely on.

How to choose

If the consumer is willing to pay a decent price for a brushless screwdriver, then they should take a deeper look. what parameters are important when choosing a quality tool.

In the design of such equipment, the chuck can be keyless or hexagonal, with a shank diameter of most often ¼ inch. In the first case, changing the tooling is easier and faster, but the other type of cartridge is no worse, so it is better to rely on the diameter. Since the value is responsible for the versatility of the instrument, it is desirable that it be larger

• The number of revolutions is equally important. If you do not plan to work with the tool constantly, but it is necessary, for example, to assemble furniture, then a screwdriver with an indicator of 500 rpm will be enough. Such a unit cannot be used as a drill, and if this function is necessary, then it is better to pay attention to a product with an indicator of 1300 rpm and above.
• The choice of battery is especially important. Today on the market you can find screwdrivers with nickel-metal hydride batteries, they have excellent resistance to mechanical stress, but they quickly self-discharge and take a long time to charge. Nickel-cadmium are quickly saturated with energy, can be used at low air temperatures and have a low cost, but they also discharge quickly and can work for a maximum of 5 years. Lithium-ion or lithium-polymer are small in weight and dimensions, do not self-discharge, but cannot be operated in the cold and have a short service life.

• The user should also pay attention to the torque, the maximum rotational force and the speed with which the screw enters the surface depends on it. If the instrument reads 16-25 N * m, then this indicator is considered average. For professional equipment, it is most often in the range from 40 to 60 N * m, and for the most expensive models it is even 150 N * m.
• The impact function allows you to use the unit as a drill, without harm to the screwdriver. Its advantage is that the tool can easily create holes in dense materials such as brick or concrete.

Of course, when buying, you need to pay attention to the additional functionality that the manufacturer offers. It is better to purchase a tool that has the ability to adjust not only the rotational speed of the screwdriver, but also the transmitted force, the direction of rotation.

The backlight and indicator that notifies you of the amount of charge are pleasant and useful functions with which work becomes more comfortable . If you have a second battery, a case for transportation, charging and even a set of accessories - such a screwdriver will certainly deserve the attention of the buyer.