2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Novice craftsmen, as well as those who want to achieve serious success, definitely need to know more about the working tool. It is also worth understanding such a topic as the device and application of the tsinubel. And first you need to understand what kind of device it is.
What it is?
Having even turned to popular dictionaries (or if you ask professionals), it is not difficult to find that the tsinubel is one of the types of plane.
Literally translated from German, this word means "toothed plow".
The device is not used by itself, but in conjunction with other types of planers . With the help of a zinubel, you can give the workpiece the proper degree of roughness. It also forms shallow tracks at the points of contact of parts.
Application
The main purpose of using a zinubel is to level boards and various slabs. Later, they can be easily glued together. Thanks to the cinubel, you can easily eliminate:
- bully;
- curliness;
- knotty.
This tool is also suitable for working with plywood. Then it can be pasted over with veneer. The result is an excellent finish. With sequential planing of an untreated board along the grain and across them, it is possible to eliminate a maximum of irregularities. Important: when passing with a zinubel, medium-sized shafts on the surface are inevitably obtained.
All the possibilities that a zinubel gives are due to the use of a special knife. But this cutting element must be clearly exposed. The blade protrudes slightly, forming a slight depression. That is why "shafts" appear. By default, the zinubel knife is placed at an angle of 70-80 degrees in relation to the surface.
The device and the principle of operation of the tool
The cutting angle at the Zinubel is close to the perpendicular. The peculiarities of the action of this tool make it possible to use it even for working with especially hard rocks. Curliness will not pose any serious problem. The only Zinubel knife that even works with mahogany and ebony has a unique cutting edge. In the area opposite to the chamfer, it is covered with a medium-sized notch. As a result, the cutting edge appears to be serrated. The tooth pitch can vary greatly:
- small - 0.75;
- medium zinubel - 1;
- large tool - 1, 25.
This device is usually referred to as flat planing planes. Experts note that the cut angle for most production models is 80 degrees. When the teeth run over the surface, they remove very narrow (from 0.8 to 1 mm) chips. Such processing, leading to the appearance of a corrugated surface, rather resembles not planing, but scratching the material.
To bring the wooden blank to perfection, after passing it with the cinubel, it is additionally cleaned with a cycle . If you change a special knife in the tool for a standard one, it will be able to replace the grinder. The block at the cinubel is shortened and narrowed.
This base piece is usually made from hardwood. Such dimensions make it possible to work both on a straight line and on a slightly curved surface.
It is believed that the use of a zinubel is as gentle as possible. The combination of the grooved surface with the raised pile increases the traction characteristics. Therefore, gluing becomes much more effective. To use in grinding mode, you need to change the knife on the Zinubel. Instead of the standard tool for this, they put a double blade with a chip breaker on the edge.
The blade is positioned at a 50 degree angle to the sole. In this case, you can:
- scold badass;
- remove irregularities;
- smooth the ends;
- achieve perfect alignment of straight sections.
Recommended:
Wide-angle And Ultra-wide-angle Lenses (26 Photos): What Are They And What Are They For? Soviet Wide-angle Lenses And Modern
Wide-angle and ultra-wide-angle lenses - what are they, what are they for? Features of shooting with such optics, selection of the best models for creating panorama frames or architectural objects
Crushed Stone (66 Photos): GOST And Types. What It Is? Crushed Stone 5-20 Mm And Large, Foam Glass And Others, Its Application And Characteristics
Crushed stone - what is it, mining methods, GOST. The main types of crushed stone: gravel, granite, limestone, foam glass and others. The main fractions of crushed stone - 5-20 mm, 20-40 mm and large
Setting Up The Planer: The Stages Of Preparation For Work, The Angle Of Installation Of The Hand Planer Knife. How Do I Tune An Instrument With A Metal Shoe? How To Use? Safety Regulations
Competent setting of the plane guarantees high-quality and safe work. To achieve a good result, it is important to follow all stages of preparation for work. How to adjust the angle of the hand plane knife?
Planer Knives: The Angle Of The Blade For A Hand Planer For Wood. How To Sharpen It With Your Own Hands At Home? Curly And Other Knives
Planer knives are the main elements of the tool. It is worthwhile to figure out what the angle of sharpening of the blade is and how the sharpening of a hand plane on wood is performed
Cutting Marble: Waterjet Cutting And Cutting Of Stone. What Can You Cut At Home? Machine And Other Equipment
What are the features of marble, how to cut it correctly at home? All about cutting methods: waterjet cutting and stone sawing. How and with what can you cut marble at home? Instructions for performing the work. Mistakes that beginners make