Mobile Sawmills: Features Of A Mobile Sawmill On Wheels, For A Chainsaw, Portable And Transportable On A Trailer, An Overview Of Models, Use

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Mobile sawmills are not such a rare, but underestimated by many people type of equipment. Meanwhile, most specialists must know the key features of a mobile sawmill on wheels, including the difference between a portable and transportable sawmill on a trailer. And also it is worth familiarizing yourself with an overview of models for a chainsaw, with the nuances of their use.

Peculiarities

The main specificity of a mobile sawmill is that this type of sawing equipment is designed for operation in the field. It is very easy to deliver such a device to the place of work. It is possible to process a wide variety of types and species of wood, as well as to obtain almost any form of workpieces.

The simplicity of mobile sawmills cannot be considered a serious drawback. For ordinary consumers and even small businesses, this is just the perfect solution.

Types and models

A good mobile sawmill is Wood-Mizer models … Only this concern supplies mobile band sawmills of monorail type. An important feature of its products is the cantilever mounting of the sawing part. As a result, after towing to the right place, setting up the sawmill and preparing it for use takes no more than 30 minutes.

Perfect cutting geometry is guaranteed, even when installed on uneven ground.

Autonomous operation of the device in the forest is supported. At the request of customers, it is envisaged to be equipped with a gasoline internal combustion engine or a diesel engine. The power plant ensures the operation of not only the sawing unit, but also the hydraulic log loading complex. The transportable sawmill is moved by the vehicle by towing. The transport kit includes:

• hitch;
• chassis;
• protective perimeter;
• lights for signaling.

Model LT20 designed to process small quantities of wood. The sawing part is located on a vertical type mast. The orientation of the sawing unit and its movement are corrected by giving commands from the operator panel. The bed is thought out in such a way that it is convenient to take the sawn cut. The work with logs with a cross-section of up to 80 cm has been implemented, and the drive power varies from 11 kW (in the electric version) to 22 hp. with. on diesel fuel or up to 25 liters. with. when choosing a carburetor option.

Quite popular, along with models on wheels, are also portable sawmills for chainsaws. A good example of this is product Realforest RF45002 width 0, 45 m. The carriage is designed for longitudinal sawing of wood. You can harvest not only boards, but also cuts and slabs. The Czech system provides a cutting depth from 0.01 to 0.36 m, the nuts are resistant to vibration and moisture.

The trailer can be moved " North 550 AVT-M " … The corner sawmill can replace both the first and second row machines. The system can be set in motion:

• electric motor;
• gasoline engine;
• physical strength of operators.

Along with belt systems, frame and disk systems are widely used . Frame assemblies are mainly used by professionals. They are needed if you want to saw a tree lengthwise.

The mobility of such equipment is conditional, usually limited to movement within the sawmill. Saw several discs at once, it is possible to orient them in different planes.

How to use?

Mobile sawmills are appropriate in 3 cases:

• with a small amount of wood processing (as well as with its episodic and / or unstable nature);
• in the absence of a large base of raw materials, which is also scattered in different places;
• when there is a lot of competition for high-quality raw materials (for example, when there is already a serious woodworking complex nearby).

In any case, it is necessary to follow the recommendations of the manufacturers, which guarantee a calm and safe, efficient use of the equipment.

It is allowed to change the saw height only after the carriage has been removed from the sawing area and it has come to a complete stop. It is not allowed to saw on the return course of the carts. The thickness of the last board received is regulated in the instructions for the technique. If it is not adhered to, system diagnostics are required. It is also required to strictly observe the norms of the parameters:

• section of the workpiece in the butt part;
• the greatest width of the cut;
• cleanliness and surface preparation;
• ways to install logs on the sawing table.

The load on the feet of the stand must be even. And you should also watch that the side clamps are fastened securely. Do not cut if there are foreign objects in the working area of the machine or there are obstacles to the passage of the trolley. It is imperative to control the clearance from the sawing parts to the side clamps. The speed is always determined according to the type of product and the type of wood. In each shift you need:

• inspect the sawmill and identify visually noticeable defects;
• evaluate the functions of safety and protective systems;
• determine the condition of the saws;
• clean sawdust;
• lubricate bearings;
• measure the temperature of motors and rotating parts of mechanisms a minute after starting.