2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15
Alcohol stain for wood allows you to protect the material from excessive moisture, prevent the reproduction of destructive microflora, and also give the product a beautiful intense color. The stain will renew the wood surfaces and give the whole room a new look.
The principle of action of the substance
Colored or transparent alcohol stain penetrates deeply into the wood structure and creates a special film on the inside and outside of the product.
Due to this, the wood fibers are lifted and the structure of the material becomes more prominent.
Peculiarities
Alcohol stain can be obtained by diluting aniline dye in denatured alcohol. The substance can be purchased in the form of a powder or ready-made mixture.
The main advantage of alcohol stain is its fast drying time . layer applied to the wood surface. But this property can also be attributed to the disadvantages of an alcohol-based substance.
In order for the surface to evenly absorb the applied tone, it is necessary to use a spray gun, otherwise (with the manual method of toning) greasy spots appear on the surface.
Color spectrum
In order to maximally reveal the structure of the tree or "age" it, the surface can be treated with liquids of different colors. By diluting several varieties of wood stains, you can get the colors "Arctic oak" or "bleached oak".
Before applying alcohol stain to the surface, you need to test it on a small area of the board. This is how you can decide on the desired tone and the number of layers to be applied.
It should be borne in mind that hardwoods absorb stain well, and conifers, due to the presence of a large amount of resin, are worse.
Application methods
Before choosing a tool for applying the substance to the wood, you need to pay attention to the following points:
- The choice of tools depends on the footage of the treated surface. For small areas, a brush or foam pad will work. For large surfaces, it is best to use a pneumatic spray gun. Using a spray can reduce the chance of oil stains and smudges.
- In order for the color of the tree to acquire a rich shade, it is necessary to apply a few words of tinting agent. The second and subsequent layers can be applied only after the final drying of the previous ones. The same rule applies to the finishing layer.
- The surface should be painted over wood fibers. Thanks to this, you can emphasize the pattern, avoid smudges and reduce the consumption of stain.
- The stain must be of the correct consistency.
- The varnish coating does not need to be applied twice on the same place, then too dark areas can be avoided.
- Alcohol stain needs a maximum of 3 hours to dry.
- The rules for applying the substance for external and internal decoration are the same.
Manufacturers
Among the most popular manufacturers of alcohol-based stains, three companies can be distinguished, whose products pleases customers with a price-quality ratio:
- Novbytkhim;
- Anles;
- Expert.
The products presented by the St. Petersburg firm "Novbytkhim" can be used for tinting door panels, skirting boards and handrails indoors, as well as veneer and plywood products.
Among the advantages of the stain produced by this company, the following can be noted:
- does not require varnishing;
- is not washed off with water;
- easy to polish;
- emphasizes the wood pattern;
- prevents swelling of the coating;
- gives the wood surface non-combustible properties.
The company "Anles" produces alcohol stains, the main purpose of which is to give the wood protective properties and a certain color that imitates another species of wood. The substance does not form a film on the surface of the product, but penetrates into the structure of the wood, thereby emphasizing the natural pattern of the natural material.
When working with anles stain, certain conditions must be observed.
The room temperature should not be lower than +5 degrees, and the humidity should not be less than 80%. The wood surface must be completely dry before processing.
Liquid from the "Expert" brand is suitable for processing wood surfaces indoors and outdoors, for tinting furniture, railings, log surfaces, doors.
The substance penetrates deeply into the material, allowing you to recreate the imitation of valuable wood species.
Available stain colors: maple, mocha, oak, mahogany, larch.
Recommended:
Wood Paint: What Product To Paint The Wood Flooring, Odorless Agent For Painting And Interior Work, Teknos Brand For Wooden Doors In Spray Cans
Wood paint is very often used in interior decoration. What product to paint wood flooring? What colors are best for you? Which manufacturers are the most in demand?
Non-water Stain: What Are The Compositions And How You Can Dilute It, The Colors Of Novbytkhim Stain Mocha And Ebony, Wenge And Oak
A non-aqueous stain gives tone to wood products and also protects them from numerous negative factors. How varied are the stain colors? What formulations are there? How can you dilute it? What are the reviews about Novbytkhim products?
Stain (41 Photos): What Is It, White For Wood And How To Do It Yourself, Novbytkhim Products For Oak, Types And How Much It Dries
Stain - what is it? Is there a white wood stain and how to make a DIY wood stain? What manufacturers' products are found on the market? How does Novbytkhim differ from Varathane, except for the country of origin?
Gloves With A Polymer Coating (24 Photos): Sizes According To GOST, Knitted And Insulated Gloves, With Polyurethane Dusting And PVC Coating, Other Types
Where are polymer coated gloves used and what are their features? What are the GOST sizes? How to choose the right knitted and insulated gloves? What should you pay attention to?
Wood Chips For Wood Concrete: How To Make A Wood Chip Cutter With Your Own Hands According To A Drawing? Choosing A Wood Crusher For The Production Of Wood Chips
What is wood concrete chips? How are wood chips made? What wood is preferred for wood chips? How to make a wood chip cutter with your own hands according to a drawing?
