2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Epoxy varnish is a solution of epoxy, most often Diane resins based on organic solvents.
Thanks to the application of the composition, a durable waterproof layer is created that protects wooden surfaces from mechanical and climatic influences, as well as alkalis.
Different types of varnishes are used for the manufacture of putties, used for finishing metal and polymer substrates.
Features of epoxy varnishes
Before use, a hardener is added to the varnish, depending on the type of resin. Thus, a two-component composition with excellent technical characteristics is obtained. … In addition to the characteristic gloss, the substance provides increased anti-corrosion and mechanical strength . It is a safe material that does not contain toxic compounds, but solvents that are also used during work contain toxic substances.
Among the disadvantages of varnish, one can single out insufficient plasticity, due to its structure and its constituent components. In addition, proper mixing is necessary to obtain the optimum coating quality.
Epoxy varnishes are mainly used for wood surfaces: parquet and plank floors, window frames, doors, as well as for finishing and protecting wooden furniture. There are special formulations, for example, " Elakor-ED ", which are intended for filling 3D-floor with flocks (chips, glitters, sparkles).
The quality of the resulting film directly depends on the type of resin used. "ED-20" is considered the most durable, and therefore the material is more expensive than its counterparts based on "ED-16".
Fluoroplastic varnishes
This type of product is a resin solution for fluoroplastic-epoxy varnishes, a hardener and certain fluoropolymer compounds of the "F-32ln" type. A feature of this group of materials is:
- low coefficient of friction;
- high dielectric constant;
- frost resistance;
- resistance to thermal influences;
- good indicators of elasticity;
- durability in conditions of intense ultraviolet radiation;
- increased corrosion resistance;
- high adhesion to glass, plastic, metal, rubber, wood.
Cold and hot curing fluoroplastic varnishes comply with existing safety standards and GOST standards. When choosing, you should also pay attention to the accompanying documentation and quality certificates.
Due to their heat resistance and electrical insulating properties, these materials:
- used to create composite varnishes, enamels;
- in combination with other resins are used in optics, electronics;
- protect exhaust fans, gas ducts, ceramic filters in water purification equipment and other devices from corrosion, including in industrial production.
The technology of their application to the surface can be different: manually with a brush, using air and airless spraying, dipping.
Transparent, lightfast materials
Epoxy varnish coatings, made on a transparent base and a transparent hardener, are designed to give gloss to any surfaces, as well as to protect them from aggressive chemical attack. They are used in the installation of self-leveling floors with decorative elements, as they are able to hide small cracks and scratches.
Main positive qualities:
- layer transparency up to 2 mm;
- lack of smell;
- resistance to sunlight;
- immunity to chemical and mechanical stress;
- sealing and dedusting any base;
- the possibility of using detergents when cleaning.
Transparent epoxy coatings are essential for the treatment of refrigeration equipment, surfaces in manufacturing and warehouses, garages, parking lots and other residential and public places.
An example of such a material is lightfast, UV-resistant "Varnish-2K "that helps to form a completely transparent and durable base.
Floor varnishes
"Elakor-ED" is an epoxy-polyurethane-based material, the main purpose of which is the arrangement of floors, although in practice the composition is also used to form a high-strength film on other surfaces.
Due to its composition, the varnish repels moisture, grease and dirt, is able to withstand temperature drops from -220 to +120 degrees.
The products are easy to use, they allow you to make a glossy protective coating in just a day. However, it is important to know how to apply the product correctly.
First, preparatory work is carried out:
- it is necessary to clean the base from dust, small debris and dirt;
- the tree should be primed and sanded;
- when applied to concrete, it is first putty and leveled;
- when applied to metal, rust should be removed from it;
- Before processing, polymer products undergo any abrasive and degrease.
A hardener is added to the varnish, which must be mixed within 10 minutes.
After the end of the chemical reaction (bubble formation), application can begin.
Since epoxy-polyurethane compounds harden within an hour, with a large area to be treated, it is better to prepare the solution in parts. Application is carried out at a temperature not lower than +5 and not higher than +30 degrees with a roller, brush or a special pneumatic device. The use of a brush requires regular cleaning with a solvent. Apply the varnish cross on the cross with a roller.
When working, it is recommended to erect at least three layers of varnish, which will ensure maximum density and strength. For one square meter, you need to use at least 120 grams of mortar. Any deviations up or down will lead to an unsatisfactory result or wrinkling of the composition on the surface.
Despite the absence of odor, it is advisable to carry out all work with epoxy mixtures in a special suit and a gas mask, since a respirator is not able to protect eyes and lungs from toxic fumes. This is especially true of EP series varnishes, as they contain toxic solvents.
Epoxy varnishes not only make the coating beautiful, but also increase its service life due to its high resistance to various external influences.
How to make a polymer epoxy coating of a concrete floor in a garage of a country house, see below.
Recommended:
Natural Varnish: Oil Composition, GOST 7931-76, Linseed Oil Varnish For Coloring
Natural linseed oil is an oily composition for wood processing. Which drying oils are made using GOST 7931-76, and which ones are made according to TU? How is linseed oil used for painting and other renovation work?
Adhesive For PVC Panels: Which Is Better For Gluing To Concrete In The Bathroom, Paste For Cold Welding Type T, Compounds For Gluing Rubber
PVC panels are an inexpensive and reliable type of finishing material. How to choose an adhesive for PVC panels? What types of adhesive are there? What is the best glue for gluing bathroom panels and mirrors to concrete? What is the T-type cold welding paste used for?
Epoxy Glue (68 Photos): Two-component Epoxy, Transparent Universal Composition, How Long It Dries, Technical Characteristics And Application
Epoxy glue can help repair broken items. Which two-component epoxy is suitable for patching holes and gluing furniture? How to choose a transparent universal compound and how long does the glue line dry?
Transparent Epoxy: What Is Colorless Wood Potting Epoxy? Two-component Nonshrinking Resin With Hardener And Other Options
What is a colorless epoxy for pouring wood: its properties, characteristics, types? How is clear epoxy used to create various objects and surfaces? Two-component nonshrinking resin with hardener and other options
Concrete Varnish: Epoxy Composition For Interior Work, Matt Polymer Varnish For Exterior Finishing "Texol", Impregnation For Concrete And Stone
What are the benefits of using concrete varnish? Are epoxies used for interior work? What decorative effect does matt resin lacquer for outdoor use create? We will talk about this and other in the article