Respirators RPG-67: Technical Characteristics Of A Gas Mask A1 Brand And Types Of Filters. What Does It Protect From?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Respirators are lightweight construction that protects the respiratory organs from harmful gases, dust and aerosols, as well as chemical organic and inorganic substances. The device has found wide application in manufacturing, engineering and mining industries, it is used in medicine, military affairs and in many other areas. The most widespread are the RPG-67 gas masks - in our review we will take a closer look at the description of this device and its technical and operational parameters.

Specifications

Respirators RPG-67 are used to protect the human respiratory system from toxic substances in the atmosphere in a gas and vapor state if their concentration does not exceed 10-15 PD. Please note that The respirator achieves maximum efficiency if the oxygen content in the air gas mixture is at least 17%, and the ambient temperature is in the range from -40 to +40 degrees.

If the initial conditions are different, then it is worth giving preference to other models of respirators or even gas masks.

The time during which the respirator has a protective effect is on average 70 minutes - these data were obtained as a result of a test using cyclohexane C6H12 at a concentration level of 3.5 mg / dm3. The actual period of protective action can vary from the specified parameter both to a smaller and a larger side - this directly depends on the characteristics of the operation and the concentration of toxic substances.

The RPG-67 respirator is a half-mask breathing apparatus, it is sold in three sizes . The respirator is selected by fitting a half mask to the face - the model is considered suitable for use by each individual user if the obturator is in close contact with the soft tissues of the face along the entire contact strip, while the penetration of air from the outside is completely excluded.

In accordance with the technical and operational parameters of the RPG-67 respirator with a volumetric air flow rate of 500 cm3 / sec. (30 l / min.), The breathing resistance on inspiration does not exceed 90 Pa, and on exhalation does not exceed 60 Pa. The respirator is distinguished by an ergonomic design, a lightweight model, due to which, even with prolonged wearing of the device, the user does not feel discomfort . The half-mask is tight, but at the same time, it fits gently to the head and does not injure the skin.

The front part of the RPG-67 is made of soft elastic hypoallergenic material , which greatly increases the comfort of using the half mask, and also keeps the temperature as close as possible to the temperature of the human body. Thin elastic walls of the protective half mask make the front part as flexible as possible and at the same time reliably adjoining with a minimum number of contact areas.

The ergonomic design ensures compatibility with other personal protective equipment such as goggles, helmets, as well as a helmet and many others.

The compact design does not restrict the angle of view and provides a complete overview . Ease of use is a nice bonus. All elements are made of high quality materials, a wide range of spare parts are provided, thanks to which the protective half mask can be used for a long time.

The manufacturer has thought of the most practical headband design. The fixation system consists of a pair of plastic straps made of rubber . They adjust the headband in four areas, thanks to the elastic retainer, the most comfortable fit on the head is ensured. The modern design of the belts increases the reliability of fixing the respirator on the face, allows you to drop the product at any time, ensures its quick fit and reduces the pressure level of the belt on the nose.

A well-thought-out system of fasteners allows you to pull off the RPG-67 without removing all other protective equipment, including helmets . Fasteners are particularly durable. The design includes two filters. The filter cartridges of protective masks can have a different composition of absorbers, each of them is designed for operation in certain physicochemical conditions and taking into account the characteristics of toxic impurities.

The service life of respirators is 1 year with timely replacement of the filter. Replacement filters have a shelf life of 3 years. On the territory of the Russian Federation, all respirators are manufactured in accordance with the current GOST R 12.4.195-99.

What does it protect from?

Respirator brand RPG-67 is a budget solution for effective protection of the respiratory system from toxic gases and acid-base vapors. It can be used where the performance of production tasks is associated with severe air pollution, and not only with dust particles, but also with toxic poisons in the form of steam or gas.

In particular, RPGs are widely used when performing:

• paintwork;
• paint removers;
• when using solvents of all types;
• for quick removal of grease;
• for the preparation of decorative mixtures for paints and enamels;
• where the evaporation of toxic organic solvents takes place.

The operation of RPG-67 respirators is justified in closed rooms in the absence of forced ventilation. Besides, The device can also be used outdoors, when harmful vapors and gases, due to their characteristics, do not escape for a long time . For example, in the heat, when working on a heated surface of the street near a source of evaporation of any solvents, the concentration of harmful vapors can very quickly reach dangerous limits and even exceed them.

This can lead to worker poisoning - of course, it is unlikely to be fatal, but nevertheless it will damage human health.

Of course, if you wish, you can use a full-head gas mask or a full-face mask, however, in these cases, such radical solutions are redundant. The fact is that Vapors from any solvent are harmful only if they enter the lungs . Thus, additional protection of the eyes and skin does not make any sense. In addition, a respirator of the RPG-67 brand, unlike a gas mask, will not cover the ears and limit the viewing angle.

Please note that when working in conditions of acid vapors or gaseous anhydrides, you should use not only a respirator, but also supplement it with goggles. This is especially important in the case when the concentration of vapors and harmful gases is high, since these toxic components often cause irritation and even damage to the ocular cornea . Eye protection will also be needed in contact with highly dusty and loose substances, as well as when using aerosol mixtures. That is why the use of RPG-67 is widespread in agriculture in cases where plantings are treated with compositions based on organophosphate compounds and ammonia insecticides.

Types of filter cartridges

RPG-67 breathing apparatus filter cartridges are classified according to their purpose, depending on the chemical-physical and toxic characteristics of hazardous impurities - they can be classified according to the structure and structure of active absorbers.

Thus, the A1 breathing device is used to protect against the following substances:

• acetone;
• kerosene;
• benzene;
• petrol;
• aniline;
• ethers;
• xylene;
• toluene;
• nitrate-containing benzene compounds;
• tetraethyl lead;
• alcohols;
• carbon disulfide;
• phosphorus-containing YC;
• chlorine-containing YC.

Grade B is used in contact with acid gases, these include:

• hydrocyanic acid;
• chlorine-containing YC;
• phosphorus-containing YC;
• hydrogen chloride;
• phosgene;
• hydrocyanic acid;
• sulfurous anhydride.

Grade D protects against mercury as well as organic mercury chemicals based on ethylmercuric chloride. The KD brand is intended for use of a respirator in environments with increased concentration:

• ammonia;
• amines;
• hydrogen sulfide.

All of the above replaceable filters can be used strictly to protect against hazardous compounds in the form of vapors and gases, the anti-aerosol filter is not provided in this version of half masks. That's why wearing an RPG-67 to protect against dust particles, especially small ones, as well as smoke, makes no sense - the vast majority of such particles pass freely between the absorbent granules.

Please note that the RPG-67 respirator has an analogue - the RU-60M model.

These models differ from each other exclusively in the type of cartridges .- in RPGs, they have a rather flat shape, and in RU, they are high. This purely external difference makes breathing through the RPG respirator slightly more difficult. However, in both cases, both gas protection devices are completely identical - having acquired one model of respirator, you can safely use cartridges from the other in your work.