Natural Moisture Board: How Many Percent, What Is The Density Of Pine And Other Sawn Timber? How Long Does It Dry Indoors And Outdoors?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Any specialist with experience with wood is familiar with the concept " Natural moisture ". This is an important parameter responsible for the performance characteristics of natural material and the quality of the final work. A professional should know what percentage of moisture a particular variety has.

Wood is a material widely used in construction and interior decoration. It is highly sensitive to changes in temperature and humidity. When working with natural raw materials, it is imperative to take into account all its features.

Distinctive characteristics

By examining the catalogs in building materials stores, you can find products labeled EB (natural moisture). Many people confuse this concept with the indicator of the moisture content of freshly sawn wood.

Natural moisture boards are a separate product category that denotes either "raw timber" or wood whose moisture percentage is higher than 22.

Recently harvested natural raw materials do not enter the market. Its moisture content is high and ranges from 80 to 95%. Such boards can easily deteriorate during transport or storage. They are susceptible to fungus, mold, and also acquire a blue-gray color. This effect was called blue.

To give the wood certain properties, drying is carried out . As a rule, it is performed in natural conditions, using air currents.

The abbreviation EB is actively used at the present time.

It indicates that the wood has a uniform moisture, formed in natural conditions, under the influence of atmospheric pressure for a long time.

Only in this case, the moisture indicator will be considered an advantage, not a disadvantage.

Modern manufacturers use GOST standards . For coniferous types of wood, GOST 8486-86 is used. This standard specifies that the wood must contain no more than 22% moisture. This is the maximum acceptable threshold for natural moisture. Such material can be safely used in the construction industry.

" Raw" timber is considered the fourth grade of wood in terms of quality . This is the last of the types that is much more affordable than dry wood. The difference in cost is about 50%. By the way, with the same natural moisture content, wood can have different weight, density and other characteristics. They depend on the characteristics of the variety and the conditions in which the tree grew.

Influence of the seasons

Moisture readings depend on certain factors.

Experts identified 3 main ones:

• weather;
• climate change;
• season.

The latter has a significant impact, as the humidity level changes with the change of seasons.

Air temperature, dampness, heat, wind - all this and much more affects the preservation of moisture inside the fibers.

The most susceptible tree species are pear, kempas and beech . External changes affect them as much as possible. The following species are considered the most stable - bamboo, merbau, oak, as well as other varieties that boast hardness and high strength.

Most experts with experience in working with wood recommend using material harvested in winter in construction. These boards contain less moisture compared to wood harvested in the warm season.

Studies have been carried out to confirm that the "winter" tree has improved performance

Under the influence of low temperatures, internal processes inside the trunk are significantly slowed down. At the time when the tree "falls asleep", the production of natural antifreeze starts.

This is a special substance similar to starch .… It prevents moisture evaporation. Wood harvested in winter tolerates drying better. After such processing, the surface remains as smooth as possible, the amount of burrs decreases. Also, the material is less subject to deformation.

How to determine the degree of humidity?

To accurately determine the moisture content of wood, you can choose one of the available methods. Professionals recommend purchasing an electric moisture meter.

This is a special device that can be used in a domestic environment to obtain the most reliable results. The principle of operation of the equipment is based on the conductivity of wood and their changes.

Experienced craftsmen cannot do without this device when working with lumber. For convenient use and storage, you can purchase a compact unit that fits in your pocket. This equipment is affordable and easy to find in any building materials store.

Professionals with extensive experience are able to determine whether a tree is dry or wet in front of them by inspection . Density and moisture content are indicated by special signs.

Conifers have the highest natural moisture content. Such types have found wide application in the field of construction, decoration and furniture manufacturing.

EB percentage:

• fir - the highest rate, from 90 to 92%;
• spruce - the second type with a high percentage of moisture content of 90%;
• then there are various varieties of pines, their EB index is from 88 to 92%;
• larch is the last tree on the list, with rates ranging from 80 to 82%.

Deciduous soft varieties:

• willow tops the list - 85%;
• followed by alder and aspen, whose figure ranges from 80 to 82%;
• linden has an average of 60%;

The last category is hard varieties:

• varieties of birches have a different percentage of moisture - from 68 to 78%;
• elm - from 75 to 78%;
• the next on the list is beech - 65%;
• natural humidity of hornbeam - 60%;
• oak closes the list with an indicator of 50%.

To designate EB are used interest … This indicator can be confused with other characteristics. For example, the specific gravity of wood is indicated in kg per m3. The indicator of natural moisture content may differ for wood of 1 grade and budget options. Also, this figure will vary for planed, edged and unedged boards.

This marking is found in areas where raw materials from the forest are used (logs, boards, beams, etc.).

Where is it used?

A bar marked with EB is actively used in various fields. In terms of reliability, durability and other characteristics, such timber is not inferior to dry timber. Moreover, it is cheaper.

This type of raw material has found its application in the following areas

• Available auxiliary material in road construction. Beams are also a wonderful addition to basic building materials in residential or industrial construction.
• The beam can be used for the construction of awnings and various seasonal structures.
• This lumber is used to make blanks for profiled timber. For this, wood undergoes a series of treatments, including drying, flaw detection and other processes.

The opinions of professionals regarding the advisability of using a bar of natural moisture differ .… Some note positive qualities, such as an affordable price and optimal performance. With the advent of this type of material, many have the opportunity to build an inexpensive house from a bar on their own.

Other experts point out disadvantages. Among them, the need to use additional insulation, spending on cladding, as well as increased construction time.

You also need to take into account that this type of material shrinks. Large cracks appear and the shape of some wood elements changes.

The EB board is suitable for flooring or building a frame house . For this, natural raw materials must have other necessary characteristics (density, wear resistance, etc.). Only in this case will the frame be sufficiently reliable and withstand the required load.

How is it dried?

The wood harvesting process necessarily includes drying. It can be performed indoors using special equipment or outdoors .… Experts have developed many drying methods, each of which is aimed at a specific result.

Most modern manufacturers use special chambers for wood processing or organize drying in atmospheric conditions.

Special heating elements or hydrophobic compounds are also used. In such conditions, the raw material dries as safely and efficiently as possible.

Drying of natural material is necessary to protect the raw material from decay . It is also needed to maintain the shape and size of the lumber. This type of treatment improves the quality of the finish, and the strength of the adhesive joints is significantly increased.

The tree dries up, which reduces its weight. Loss of moisture leads to a slight change in size. The length is reduced from 5 to 7%. The height and width of the raw material are also trimmed.

The main purpose of drying is to make the humidity even. Such, what it would become after a certain time interval, subject to specific conditions.

If the material is not artificially dried, this will happen naturally.

During the drying process, water evaporates from the wood first from the upper layers. After the process comes to deeper fibers. Most of the liquid is concentrated inside the barrel.