2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09
“Progress does not stand still” - how many times have we all heard this phrase. Most often, the expression is used for technique. Indeed, in the days of modern digital equipment those things that were popular 15–20 years ago have become a rarity. Telephones and televisions have changed, pagers, cassette players, tape recorders and video recorders have practically disappeared into oblivion. Now very few people use rare video equipment, so models of modern television equipment from any manufacturers do not have special equipment for connecting video to TV.
Fans of rare technology still use tape recorders for their pleasure, however, the question of synchronizing equipment often arises.
However, nothing is impossible, the main thing is to find a suitable method of connecting one device to another.
Basic connection methods
The instructions provide for connecting video devices to a new TV, setting up the operation of equipment takes one to two hours at most. It is necessary to connect the necessary connectors by means of a special cable, but here some problems may arise, because not every person will immediately understand the names and purposes of wires and connectors.
There are several basic ways to connect a VCR to any TV. The main ones can be considered:
- coaxial cable connection;
- connection via RCA-cord (through the "tulip");
- connection via SCART adapter;
- connection in parallel with cable TV.
Each method has its pros and cons, the final version must be chosen based on the interface that is inherent in the TV.
It is possible that the connectors you need in your equipment are missing, this mainly concerns new TVs. The problem can be easily solved by purchasing a special adapter.
We will analyze step by step all of the listed methods of connecting the equipment
Via coaxial (antenna) cable
To connect a radio tape recorder to a TV using an antenna wire, you need to do a few simple steps
- The plug connects to the VCR input labeled "RF / COAX Out".
- The second plug must be connected to the TV panel through the input labeled "RF / COAX In".
- Turn on the video player, insert the cassette and click on the "Play" or "Play" button. Through the search, we find the channel number we need, which will display a picture with sound waves from the cassette, and enjoy watching the video.
Via RCA cable ("tulip")
This method of connection is also quite simple, since the cable with a little clue - it has three connectors in red, white and yellow. Let's analyze the connection step by step.
- The yellow connector is inserted into the VCR jack marked “Video Out”, the other side of the connector is connected to the TV panel through the input marked “Video1” or “Video IN”. For ease of connection, the inputs are color coded, so the yellow connector mates with the yellow input. Using the same scheme, we connect the rest of the plugs to the inputs corresponding to their colors on the equipment panels.
- On video equipment, press the button with the designation "Start", "Playback" or "Start", the name of the button depends on the model of equipment and may differ.
- Using the remote control, select the button "Video1", "Input1" or "AV", which also depends on the model and manufacturer of your video player.
The above connection methods are suitable for connecting the video recorder to old TV equipment, in the case of new LCD plasma devices or smart TV models, you need to use the third method.
Via SCART interface
This connection will be optimal, as it allows you to display a very high-quality picture. In the absence of this connector, you must use a special adapter, the plug of which is inserted into the USB or RCA input (this depends on your TV model).
When using an adapter with RCA-input, a wire of two “tulips” is used, so that the VCR connector marked “RF / ANT In” can be used to connect the antenna cable.
Connecting parallel to cable TV
Another interesting technique for combining techniques. It is possible when receiving TV channels through a coaxial cable connected through a receiver to the cable TV input or through a special cable TV receiver, otherwise called a tuner.
Then the video recorder is connected to the receiver (tuner), and only then to the TV, which requires a set of two RCA cables and one antenna cable.
Let's analyze step by step the connection steps
- We connect with a coaxial cable the input labeled "Cable Out" on the TV / tuner and the input labeled "RF In" on the VCR.
- With one set of "tulips" we connect the inputs labeled "Audio Out" and "Video Out" on the receiver to the inputs labeled "Video In" and "Audio In" on the VCR.
- With another RCA cable, we connect the video equipment to the TV panel (you can replace the RCA cable with a SCART adapter).
- We turn on the equipment. On the TV, select the input labeled "AV", "Video 1" or "Input", on the VCR - labeled "Cable".
Technique check
It is necessary to carefully check all types of connectors on the equipment to determine which option will be optimal in order to connect the VCR to the TV. After connecting, it is imperative to make sure how correctly the procedure was carried out by performing a technique check . This action will not take much time.
When connecting via an antenna cable, you must turn on the video recorder; if the connection is successful, the video goes into standby mode (the screen turns blue or black).
When connecting via SCART, both devices must be turned on at the same time, the signal source is changed with the Sourse button.
Possible problems
When connecting devices of different generations and manufacturers, problems often arise, but they are all solvable
- Interference . If there is interference, first of all we check the wire, it is possible that it is not fully inserted into the connector.
- The TV does not “see” the signal from the VCR . This problem has a number of reasons: the wrong transmission channel is configured, the cable is damaged, or the socket is broken. In the first case, you need to select a different source of the transmission channel in the settings. If the wire is damaged, it must be replaced with a working one. In the latter case, you need to either replace the socket yourself, or give the equipment to a repair shop.
- TV and video connectors do not match . This problem is solved by purchasing a special adapter (SCART).
- The sound from the TV is superimposed on the video . The audio signal can come from a different source in the background, this inconvenience arises from the television antenna. To get out of this situation, it is necessary to carefully move the antenna in different directions, thus slightly changing its previous location.
Recommendations
Before connecting, be sure to study the instructions for television and video equipment for an approximate understanding of the principle of operation of the technique. It is also necessary to check the health of both devices, otherwise the connection may be dangerous to your life and health.
Cables are checked in advance for serviceability and compatibility with all connectors on the equipment. Do not forget about safety precautions, it must be remembered that the connection is made with the devices turned off in order to avoid their breakdown.
Observing simple recommendations and choosing the necessary option for connecting the VCR to your TV, you can indulge in nostalgia and watch your favorite films on cassettes or video recordings of some important life moments for you.
Recommended:
How To Connect A Digital Set-top Box To A TV? How To Tune Digital TV Channels? Installation And Connection To TV Through Tulips And In Other Ways
How to properly connect a digital set-top box to the TV? What equipment might be required for this? How to tune digital TV channels after connecting? What problems can arise when connecting and configuring?
How To Connect Xbox To TV: Xbox 360 And One S, Sees Through HDMI And No Signal, How To Turn On Through Tulips And Other Methods, Setting
How do I connect my Xbox to my TV? Xbox 360 and One S, what's the difference? What if the TV cannot see the game console connected via HDMI? What if there is no signal?
How To Connect The Receiver To An Old TV? Connecting The Receiver Through The Antenna And Through The Tulip, Useful Tips For Installing The Tuner
Why do you need a receiver - a receiver of a digital signal? How can it be connected to an old TV? Connecting the receiver through an antenna, through a tulip and other options. Tips for solving possible problems
How To Connect The Receiver To The TV? Connecting A TV Tuner Through A Tulip And Through An Antenna Output. How Do I Set Up The Receiver?
How to connect the receiver to the TV? How to connect the TV tuner through the "tulip", through the antenna output? What connectors are used to connect the set-top box to the TV? What kind of decoders are there? What do you need to know to connect a set-top box to two TVs?
How To Connect Laptop To TV? We Connect Via VGA. Connection Via "tulips". How Else Can You Connect? How To Bring Laptop Screen To TV?
How to connect laptop to TV? We connect via VGA, HDMI, VGA, RCA, as well as S-Video, Wi-Fi or Ethernet. Features connecting a laptop to a TV through tulips