Decking Under A Brick (25 Photos): Profiled Sheet For Cladding A House And For A Fence With A Pattern Of Brickwork, In The Form Of White And Red Bricks

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Metal sheets of corrugated board with a pattern imitating brickwork is a very popular building material. It is widely used as a decoration for walls and fences of territories. In comparison with natural brick, metal profiles are much cheaper, and much less time is spent on all installation work. At the same time, high qualifications or experience in construction are not required from the master.

Advantages and disadvantages

Sheets can successfully camouflage any defects in wall surfaces and decorate the roof, especially with long slopes. The steel material from which the profiled sheet is made is covered with a special polymer layer that protects it from all kinds of damage of a different nature. The coating demonstrates high resistance to aggressive environmental conditions. Metal sheets decorated with bricks do not require maintenance . Cracks and chips do not form on them, the only thing that is required is to periodically wipe the surface from dust. Cloths with pural or PVDF application are not afraid of dampness and temperature fluctuations, do not fade or deform.

Metal profiles can be given any pattern and tone. But many construction companies appreciate it not only for this, but also for its low weight and mobility during loading, transportation and installation. When working with a metal profile, there is no need to use expensive special equipment.

Finishing the outer walls with corrugated board is done in a matter of hours, in extreme cases it takes a couple of days in a situation with a large amount of work or a long fence . This is a tremendous saving in time and material costs. Installation of a metal profile is much cheaper. For the device of such a lightweight fence, it is enough to properly deepen the pillars of the support.

Of the shortcomings of professional sheets, several points can be noted. Perhaps for some, they will be fundamental when choosing between masonry and its imitation.

• Finishing with a metal profile increases sound transmission. But the amplification of sounds from the outside can be easily leveled if you lay a layer of assembly wool.
• If the outer polymer layer is damaged, the material will lose its resistance to corrosion. This trouble is eliminated by painting over the place of damage. We'll have to come to terms with a partial loss of decorativeness or replace the entire sheet.
• Even the most accurate imitation of brick as a pattern on corrugated board will not be able to compete with real brickwork. Up close, the difference in texture will be obvious. Even the most matte options shine treacherously, and the pattern, even the most realistic and voluminous, will still look flat when viewed in detail.
• A professional sheet with a wear-resistant colored coating, with careful use, can last no more than 40-50 years. But this is quite enough.
• The decorative coated steel sheet similar to Printech is widely produced in China. These products are often of poor quality. Therefore, you need to carefully approach the choice of the manufacturer, and check all the supplier's certificates before buying. Otherwise, there is a risk of ordering material that will need to be changed after several years of service.

How is a professional sheet made?

Brick-coated profiled sheets have been developed relatively recently. The Korean company Dongbu Steel became a pioneer in this direction. Thanks to her engineering developments, a technology for applying all kinds of patterns to a metal surface was created. This technology was given the name Printech, and today decorated metal is sent to different countries around the world, including Russia.

The metal profile, decorated with a pattern for brickwork, differs from the standard color profile in that a clear image is applied to the main coating using the offset printing method . It is protected from abrasion by a colorless layer of polyester or PVDF. It would be more accurate to call it not a drawing, but a photograph with a high level of detail on the subject. From some distance, such a refined corrugated board is quite easy to confuse with real brickwork. Of course, the difference will be more noticeable up close. First of all, because of the different texture: "brick corrugated board" for many years remains bright, smooth and uniform, with a wavy structure. While brick is rough, matte and patchy.

Printech's unique coating layer is about 35-40 microns. The manufacturer tests samples of its products for the level of hardness and resistance to possible damage by atmospheric and other factors.

With proper installation and careful operation, sheets of corrugated board with a brick pattern and a polyester coating will not lose their initial visual appeal and all other qualities for up to 20 years or more.

The PVDF coated material has a longer service life and is guaranteed from 35 years.

What happens?

The material, known as corrugated board, comes in the form of thin sheet metal blanks made from cold rolled steel. This method gives the sheets a trapezoidal, wave or other typical design. This is done not only to give a certain structure, but also to increase the strength of the material.

The range of colors is varied: from monochromatic options of red, green and other colors to patterns with imitation of wood, brickwork, sea pebbles . The least practical and rarely used is white. Consumers are much more willing to use spectacular colors in their designs.

Metal sheets with a color similar to those of natural origin are very popular for outdoor decoration and fencing.

Where is it used?

The usual colored corrugated board is traditionally used for roofing the roof, and the "brick" design is a purely design material.

Decking can reliably protect not only from weather whims, which are quite aggressive, but also from uninvited visitors.

This building material is widely used in various areas of construction. Some of them are worth checking out:

• facing of external walls, the facade of country buildings, storerooms, hangars, trade pavilions;
• use in the construction of load-bearing structures, due to the high rigidity of the material;
• when building a foundation;
• as a roofing material on the roof;
• in the form of a fence around the territory.

For fences

Most owners of private plots prefer to use corrugated board as a fence. This is dictated by its quality characteristics, affordable cost and low weight of the material. All these points are considered important for many.

Profiled sheeting with brick-like decor is especially popular . This particular drawing is equally to the taste of professional urban developers, summer residents and villagers. The decorative metal profile becomes a real decoration of the site and reliably protects the garden and the house from strangers.

The sheet metal profile, decorated with bricks, is applicable in fences not just as an independent sheet, but also in combination with various materials . For example, the now fashionable combination of a profile with a "brick" pattern with a real brick. Natural building materials in such a fence are used in the performance of support pillars.

This combination is chosen by connoisseurs of natural materials who want to save money on the construction of fences. Thus, for little money, it is possible to get an effective, strong and stylish fence - a metal profile, complemented by brick pillars.

For buildings made of metal profiles

Sheets in designer coloring in the form of bricks are just as good in the construction of small buildings. Compared to natural wood, metal is much more practical and does not require a foundation, while the buildings look like capital ones.

Such a profile sheet is convenient to use when planning a garage, utility block, warehouse and other household buildings.

As a finishing material

When decorating capital buildings, colored corrugated board is used in two versions

• Purely for design purposes . If it is necessary to hide an unaesthetic facade or plinth, disguise an unattractive-looking foundation, for example, a pile-screw structure.
• For insulation of wall surfaces with ventilated facades . Profiled sheets are used to save budget.

For cladding the whole house, corrugated board with a brick pattern is not suitable. A facade sheathed with the same type and catchy pattern can quickly get bored with its lurid look. In addition, the background of brickwork on a large scale can strain the eyes and look out of date.

It is better to put a sheet profile with a pattern in "brickwork" on the plinth trim, and for facades, choose a light sheet with a natural stone decor. You can do the same with the design of the gables.