Corner Kitchens Made Of Plastic (26 Photos): Design Of Kitchen Sets In An Aluminum Frame, Features Of Choice

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Every housewife knows that the kitchen should be not only beautiful, but also practical. There is always high humidity in this room, there are particles of grease and soot in the air, which settle on all surfaces. For the kitchen, you need to choose the right headsets - they should be comfortable, roomy and easy to clean. The best option is plastic corner kitchens, which are available on the market in a wide range. They are distinguished by their affordable price and attractive design, which explains their popularity among consumers.

Characteristic

Plastic is a polymer that is durable, flexible and water resistant.

Despite all the advantages, it is used only as a decoration, and several materials are the basis of kitchen sets.

Wood

Products made from natural wood are distinguished by their strength and durability, but at the same time they significantly increase their cost. For kitchens, larch, spruce or pine are mainly used, since they are resistant to moisture and putrefactive formations.

MDF

This material is a board made from sawdust and a binder. MDF is widely used in furniture production, since it is resistant to moisture and high temperatures, so it does not crack or swell during operation.

In addition, the material is durable and not prone to deformation.

Chipboard

The most budgetary option is chipboards. The material itself is not highly resistant to moisture and temperature fluctuations, but with the right finish it can compete even with natural wood.

Due to its low weight and ease of processing, corner kitchen sets of any design are made from chipboard.

Finishing types

Roll

This type of finish is the most affordable option. The huge advantage of rolled plastic lies in its flexibility and the ability to finish surfaces of any shape, only it is not of high quality. This type includes the following materials:

• Thin polyvinyl chloride film (PVC) , with which the kitchen set is glued under pressure, protects the product from moisture and exposure to chemicals, so the surface can be safely cleaned with detergents, but it is important to use a soft sponge;
• Acrylic film , which is fastened by hot pressing; its strength characteristics are slightly higher than that of PVC, while the thickness of the coating can be only 1 mm.

Sheet

The sheet type of material has increased hardness, strength and wear resistance. Unfortunately, it is not suitable for finishing surfaces of complex shapes, for example, curved headset facades. There are several varieties of materials of this type.

• HPL plastic , which is a multilayer paper impregnated with thermosetting substances. It is perfect for the manufacture of corner kitchen sets, as it does not lend itself to moisture, combustion and temperature extremes. In addition, the material is not afraid of aggressive substances, it is easily cleaned of dirt and is not afraid of mechanical damage.
• Acrylic panels , which are made on the basis of chipboard or MDF. First, a colored coating is applied to the base material, and then it is finished with transparent acrylic. Often there are panels with pictures that are printed on special printers. Acrylic panels have the same properties as HPL plastic. In addition, they serve for a long time and do not lose their attractiveness. Of the shortcomings, it can be noted that the damaged elements of the kitchen cannot be repaired, and this beauty is very expensive.

End finishes

In the manufacture of corner kitchens, usually only the facade is faced with plastic and, quite rarely, the back side of the products. To prevent damage to the headsets, you need to protect the ends, and this can be done in several ways.

Postforming Is a technology that allows you to bend plastic at the desired angle to form a continuous coating with a smooth transition. To do this, use a finishing material of such a size that it wraps around the upper and lower end of one or another piece of furniture.

PVC finish or acrylic edging is ideal for corner kitchens of any geometric shape. Thanks to the variety of colors, you can choose the edge of any shade.

Aluminum profile - This is a metal frame that provides products with durability, resistance to moisture and damage. In addition, the doors in the aluminum frame look quite stylish and are suitable for creating modern or high-tech kitchens.

The design of plastic corner kitchens can be varied, since the finishing coating can imitate natural stone, wood, leather, metal and other materials. In addition, facades are often decorated with drawings and give a special texture to surfaces for special attractiveness.