Bath Width: Standard And Narrow Options 50 And 60 Cm, Standards 65 And 80 Cm, Large Models 100-170 Cm, Whatever The Length

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

The bathroom is one of the most frequently visited places in the apartment. And if it is also well-tiled and equipped with comfortable modern fixtures, it becomes a great place to relax and unwind after a hard day. The size of the bath and the material of its manufacture affect the tactile sensations of a person during the operation of the device. Therefore, you need to decide in advance on the dimensions of the product, taking into account all the necessary nuances.

Manufacturers' standards

Manufacturers always take into account the wishes of buyers. Someone needs a large bath, and someone is content with a smaller design due to the small size of the room. However, everyone adheres to the standard sizes of plumbing: the length can be from 160 cm to 180 cm, the depth is from 60 to 80 cm, the height, according to SNiP standards, should be at least 60 cm. The capacity of a standard bath reaches from 90 to 120 liters. A traditional bathtub can always be found at any plumbing store.

Baths made in the Soviet Union, with dimensions from 150 cm and an average width of about 75 - 80 cm, do not suit some owners, since they are not as comfortable as modern devices. The modernized models are made in the best design solutions. They have special recesses or extensions in the bathtub walls, special armrests and headrests.

Experts advise, first of all, to select the size of the bath for the room and only then determine its appearance, based on the personal wishes of the future owner. The standard depth for all types of devices is no more than 60 cm. It is believed that in this way a person's head is above the water. And this is a safety requirement when adopting a water procedure.

To calculate the required size, first of all, you need to focus on the tallest member of the family . The length should be selected so that a person can sit in the bathroom, reclining, legs extended completely. If the family does not have a very tall person, you need to focus on the standard size. When choosing a width, you need to take into account the weight of all family members and the characteristics of their physique. It is considered correct that a few centimeters remain from the shoulders to the bathroom wall.

Minimum and maximum dimensions

It is necessary to take into account what material the baths are made of. The widest size range is available for cast iron products.

Cast iron baths are presented in the following dimensions:

• Miniature: length is 120 cm, width is 70 cm.
• Small: product length - 130 cm, width - 70 cm.
• Eurostandard is presented in two types of dimensions: length - 140 cm, width - 70 cm; length - 150, width - 70 cm.
• Non-standard products reach lengths up to 170 or 180 cm, the width of such options is 70 cm.

Manufacturers take into account the different living conditions of people in apartments. Therefore, for the smallest rooms, the following sizes are offered: length - 100 cm, width at the headboard - 80 cm, width at the legs - 55 cm.

Manufacturers make steel baths according to standard sizes. Length - from 150 to 180 cm. The width of the product varies from 70 to 85 cm. The depth of the bowl is 65 cm.

Acrylic models are leaders in a variety of shapes and sizes . The standard length of products is from 160 cm to 180 cm. Variations of sizes in width are from 70 cm to 120 cm. Among the plumbing fixtures made of acrylic, you can find the most unusual sizes. These baths are suitable for very small spaces. Narrow products range in width from 45 to 50 cm, these dimensions are more suitable for taking a shower.

Considering the design of acrylic bowls and the sinuosity of their shapes, you can choose products with the following dimensions: width - 60 cm, length - 150 cm. Examples of a product with non-standard sizes are the following indicators: width - 68 cm, length - 185 cm.

What shape can there be?

The plumbing market has become very diverse in its offerings to consumers. This is especially noticeable in the shape of the bathtubs. Every year the models change, a variety of product shapes are offered: rectangular, square, round, oval, triangular, asymmetrical. Only the depth of the bowl is not changed by the designers. It remains standard for most types of baths.

But thanks to the variety of forms, plumbing can be installed anywhere, including the smallest room. A corner bath is ideal here. Owners of large apartments prefer to install plumbing in the middle of the room. The choice of the shape of the bath depends on the interior of the room and the personal preferences of the owner.

Does the material affect the scale?

The dimensions of the bathroom depend on the material from which they are made. Cast iron baths have always been in demand due to their durability. But such products had problems with enamel. When pouring water, a dull sound is emitted, which is almost inaudible. It is muffled by the large dimensions of the cast-iron bath.

Another disadvantage of such plumbing is its weight. Such a device is difficult to bring to the floor without assistance.

There is not a great variety of shapes among cast iron products . Typically rectangular bathtubs are offered in standard sizes. Finding an original product is difficult. There are options with a recessed bowl or models that differ from the traditional ones in length.

Baths of European manufacturers are popular, which produce products with decorative legs. Typically, such plumbing is designed to be installed without a screen. The inner and outer sides of the device are coated with enamel. These bathtubs are designed for spacious rooms.

Cast-iron bathtubs have another small disadvantage, which is especially noticeable in the cold season. Due to its high heat capacity, cast iron is always cold before starting procedures. Therefore, it is necessary to warm up the material under streams of water before using it.

Steel baths are significantly inferior to reliable cast iron in terms of operating characteristics . But such devices are 3-4 times cheaper than cast iron ones. At the same time, there are various proposals for buyers regarding the choice of shapes and sizes. They can be oval, trapezoidal, rectangular. There are long options or very small ones - sedentary.

Metal baths are not so heavy in weight and have a low degree of heat resistance. They are made of black steel and stainless steel. Products made of black steel are always covered with enamel, and stainless steel baths are not always provided with such a coating.

These models have very thin walls . Therefore, if the device is subjected to high stress, cracks may appear, and the walls sometimes deform. If there is damage to the enamel, then the metal begins to collapse. Therefore, when installing a metal bowl, it is recommended to place it on a frame, which will be used as support and protection for the walls of the product. Usually bricks or building blocks are used.

And one more disadvantage that users note - water knocks very loudly on the surface of the product. It is recommended to use soundproofing materials during installation.

The attention of buyers is always attracted by acrylic products. Such options are distinguished by a huge variety of sizes and shapes. They are made with bends, steps, seats, armrests. They can be both traditional and with a hydromassage function.

Acrylic bathtubs are lightweight compared to metal fittings . One person can handle loading and transporting the product. How long such a bath will last depends on the quality of the polymer.

Plumbing acrylic is prized. It is poured from fiberglass, and the wall thickness of the sanitary ware reaches 3 mm. But for the price, such baths are on a par with cast iron products. During installation, it is recommended to place the device on a frame to protect the walls from sagging.

It is best to wash the bathtub with special sponges and acrylic products. The composition should not contain abrasive agents. Do not clean products with bleach. For the surface of such a bath, boiling water can be destructive.

The enamel of metal baths also does not tolerate the effects of bleaching and abrasive agents. The main thing is to leave the surface dry after taking the procedures in order to prevent cracks and corrosion.

How to fit everything in the bathroom?

After determining the required dimensions for a suitable bath material, many still cannot decide how and where to install the structure. Bathrooms can be combined with a toilet. In addition, part of the space is usually occupied by a washbasin.

If the room is large, you can create a full-fledged and multifunctional room for water procedures with cupboards for towels, a washing machine and other household appliances, a comfortable ottoman, and a cozy rug.

Before buying a bath, you should always draw up a plan indicating the amount of plumbing and its dimensions .to keep all devices freely accessible and convenient to use.

If the bathtub turned out to be less than the width of the room, then you definitely need to think about how and how to close the resulting space. This will help prevent water leaks during the procedure. Experts suggest covering such places with special shelves.

Often, when installing a bath, a frame is used to strengthen the structure of the product. Usually it is covered with a decorative shield or screen. It is necessary to immediately install a hatch in it to access communications in the event of an accident.

Every little thing should be foreseen so that the bathroom does not seem overloaded with unnecessary items and cramped . All areas of the room must be correctly filled. For example, corner racks can be installed in free corners. Above the door, you can place a shelf on which you can store less frequently used items, for example, stocks of toilet paper rolls.

You can hang a small cabinet above the sink to store your personal hygiene items. The door of this cabinet can be equipped with a mirror. Even a bath screen can provide additional storage space for small items. Now you can find options for products with pockets.

Useful design tips

Designers advise using corner bathroom models in small rooms. Due to their shape, they take up little space and leave space for the arrangement of the room. Another option can be products of the so-called energetic form. In such devices, one end is made in a standard size, and the other is narrowed.

Modern manufacturers produce plumbing in sets , when the bathtub and washbasin are immediately made in non-standard elongated shapes. They have a common faucet with a spout, which allows them to perform two functions - to fill the bathtub and to carry out procedures using the washbasin.

To expand the space, it is recommended to choose light-colored tiles. Glossy ceilings will visually enlarge the room.

The bathroom should be cozy, and the bathtub plays the main role in its interior. Therefore, there should be a special approach to the choice of this type of plumbing, taking into account such parameters as functionality, interesting design, easy maintenance.