Greenhouse "Snowdrop" (51 Photos): Yielding Greenhouses Of Mini And Other Sizes From "BashAgroPlast", We Put Our Own Hands, Customer Reviews

Table of contents:

Video: Greenhouse "Snowdrop" (51 Photos): Yielding Greenhouses Of Mini And Other Sizes From "BashAgroPlast", We Put Our Own Hands, Customer Reviews

Video: Greenhouse
Video: Island Decorating and Progression Strategy in June’s Journey 2024, April
Greenhouse "Snowdrop" (51 Photos): Yielding Greenhouses Of Mini And Other Sizes From "BashAgroPlast", We Put Our Own Hands, Customer Reviews
Greenhouse "Snowdrop" (51 Photos): Yielding Greenhouses Of Mini And Other Sizes From "BashAgroPlast", We Put Our Own Hands, Customer Reviews
Anonim

Heat-loving garden plants do not thrive in temperate climates. The fruits ripen later, the harvest does not please gardeners. Lack of heat is bad for most vegetables. The way out of this situation is to install a greenhouse, which you can easily do yourself.

One of the best options, according to summer residents, is the "Snowdrop" greenhouse, which is produced by the domestic enterprise "BashAgroPlast".

Image
Image

Features: pros and cons

The "Snowdrop" brand is a popular greenhouse that has earned a lot of positive reviews. Its main feature and difference from a greenhouse is its mobility. This design is easy and quick to install. For the winter, it can be assembled, if necessary, it can be easily transported to another place. When folded, the product takes up little space and is stored in a bag-cover.

Agrofibre acts as a covering material for the greenhouse . It can withstand heavy loads, its service life is at least 5 years, subject to the rules of use. Even a strong wind will not damage the cover. Agrofibre is a breathable material that maintains a special microclimate inside that plants need. The humidity inside such a greenhouse is no more than 75%, which prevents the development of various diseases.

Image
Image
Image
Image
Image
Image

By purchasing the Snowdrop greenhouse, you will receive a set of frame arches, covering material, legs and clips for fixing the non-woven fabric. The design advantages include its characteristics. Thanks to the arched design, the space is used with maximum efficiency. The greenhouse can be easily transported in a car.

They sell it in a complete set, you do not have to separately purchase additional elements for its installation . Assembling the structure takes only half an hour. It opens from the side, for ventilation, you can raise the covering material to the high part of the arches. Plants can be accessed from different directions. "Snowdrop" can be used in the greenhouse for additional protection of the beds or seedlings. If necessary, structural elements can be purchased separately (the brand provides for the presence of separate components).

Image
Image
Image
Image

But gardeners have noticed several disadvantages of such greenhouses. According to their opinions, the structure does not withstand strong gusts of wind. Plastic pegs for anchoring in the ground are too short, so they often break. If the strength of the structure is important to you, then it is better to choose the "Agronomist" model. In general, the Snowdrop greenhouse is perfect for beginner gardeners who want to increase their yield at minimal cost.

Description of construction

Despite the fact that the design of the greenhouse is extremely simple, this does not greatly affect the strength and reliability. Snowdrop can be a great addition to your greenhouse. The design includes plastic arches with a diameter of 20 mm and spunbond (non-woven material that is used to shelter plants during their growth). It is lightweight and environmentally friendly, helps to accelerate the growth of crops, makes the vegetable garden productive and protects plants from the negative effects of the environment. The indisputable advantage of spunbond is the fact that it dries quickly even after heavy rain.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

8 pictures

The "Snowdrop" greenhouse of the "BashAgroPlast" trademark has a convertible top instead of doors. In some models, the covering material is removed from the end and sides. After use, the spandbond can be machine washed.

Today this greenhouse has become more popular than the greenhouse. It is a compact design, the height of which does not exceed 1 meter, so it can be mounted in areas with limited space.

In a greenhouse, the heating process is carried out as a result of the energy of the sun . There are no doors in the structure, you can get inside by lifting the covering material from the end or side. Cellular polycarbonate and polyethylene are used for the production of these greenhouses. Greenhouse "Snowdrop" helps summer residents to get yields in the shortest possible time. It is convenient and comfortable for plants. The use allows you to grow tall vegetable crops.

Image
Image
Image
Image
Image
Image

All the necessary parts are provided with the Snowdrop model. If suddenly, for some reason, the buyer lost them or the arcs broke, you can buy them without worrying that they will not fit. The same applies to the loss of clips and legs for greenhouse arches. The design allows the replacement of components, which makes it more convenient and extends the service life.

Dimensions (edit)

The factory design of the greenhouse is designed to cover 2 - 3 beds, so its width is 1.2 meters. The length of the frame depends on the number of arcs included in the kit and can reach 4 6 or 8 m. The height of the structure is 1 m, but this is quite enough for watering and weeding the seedling. The weight of a mini greenhouse depends on its size.

For example, a microsteam with a length of 4 meters will weigh only 2.5 kg . The model, the length of which reaches 6 meters, will be heavier (about 3 kg). The mass of the longest greenhouse (8 m) is 3.5 kg. The low weight of the structure adds to its advantages.

Image
Image
Image
Image
Image
Image

What can be grown?

Greenhouse "Snowdrop" is used for growing seedlings before planting them in open soil or greenhouse. It is great for cabbage, cucumbers, tomatoes.

Also, gardeners install it for growing crops such as:

  • greens;
  • onion and garlic;
  • low-growing plants;
  • vegetables that are themselves pollinated.

Often, the Snowdrop greenhouse is used to grow flower seedlings. However, experienced gardeners do not advise planting plants of different crops in the same greenhouse.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

9 pictures

Where to put it?

It is necessary to choose a site for the "Snowdrop" greenhouse since the fall, since it is necessary to fertilize the beds in advance and lay humus in them.

In order for the structure to take "its" place, the following conditions must be taken into account:

  • the site must be exposed to sunlight;
  • there must be protection from strong gusts of wind;
  • the humidity level should not be exceeded;
  • availability of access to the structure (the greenhouse must be installed so that the approach to it is from all sides).
Image
Image
Image
Image
Image
Image

When you have selected a site, clear the area of weeds and carefully level it. Humus is necessarily laid throughout the site. To do this, a hole is dug about 30 cm deep, fertilizer is poured, leveled and covered with earth.

Installing a greenhouse will take you a little time, even if this is your first time faced with a similar task.

Image
Image

DIY assembly

Installation of the Snowdrop greenhouse is simple. Manufacturers have thought through everything to the smallest detail so that gardeners can install the structure on their site as quickly as possible and without obstacles.

Image
Image

Self-assembly of the greenhouse is carried out on the basis of simple instructions:

  • Carefully open the package and take out the pegs and clips.
  • Insert the pegs into the arcs.
  • Place the stakes in the ground. It is not recommended to throw out the packaging: in winter it will be possible to store the structure in it.
  • Secure the arcs and stretch the covering material. Arcs must be installed at the same distance.
  • Secure the ends. To do this, pull it with a cord, thread the loop into the peg, pull it and fix it at an angle to the ground.
  • The covering material at the end can be fixed with brick or heavy stone to increase reliability.
  • Fix the covering material with clips on the arches.
Image
Image

The end edges of the covering material, tied in a knot, are best pressed to the ground at an angle. Due to this, additional covering tension will be achieved on the entire frame. On the one hand, the material is pressed with a load to the ground, on the other, the canvas is fixed with clips. From there, the entrance into the structure will be carried out.

Greenhouse "Snowdrop" can be homemade . It is installed by hand without the help of specialists. To do this, you need to choose plastic pipes of suitable dimensions.

Use a jigsaw to cut them into equal pieces. Covering material must first be sewn, leaving pipe pockets. The pegs can be made of wood, after which the material is fixed with clips, which can be used as clothespins.

Image
Image
Image
Image
Image
Image

Operating tips

There are several rules for using a greenhouse, the observance of which can extend the life of the structure.

Improper use of the greenhouse can lead to damage

  • In winter, the greenhouse must be assembled and folded into its original packaging, it is better to store it in a dry place. Temperature does not matter, as the durable coating can withstand absolutely any conditions.
  • Every year agrofibre has to be washed by hand or in a washing machine (it doesn't matter: this does not impair the characteristics of the material).
  • Only clips are used to fix the coating.
  • Handle the covering material carefully so as not to damage it.
Image
Image
Image
Image
  • Before installation, not only level, but also fertilize the soil.
  • Do not plant plants that can pollinate each other. If this cannot be avoided, then a partition must be installed between them.
  • Do not grow tomatoes and cucumbers in the same structure: these plants need different conditions. Cucumbers need moisture, while tomatoes need dry conditions. In addition, tomatoes do not tolerate high air temperatures well.
  • Vegetables that are self-pollinated are excellent choices for in-structure cultivation. If you plan to plant standard varieties, then you need to arrange additional pollination in advance.
Image
Image
Image
Image
Image
Image

The rules are extremely simple and do not require much effort. Despite its low weight, the construction of the Snowdrop greenhouse is voluminous and has a large windage.

Despite the fact that the greenhouse is reliable, and the owners convince that a strong wind is not terrible for him, it is better to play it safe. For this, the covering material is strongly pressed to the ground. In areas where strong gusts of wind are often observed, vertical metal racks are additionally mounted at the ends, to which the frame is tied.

Image
Image

Customer Reviews

Greenhouse "Snowdrop" has a huge number of positive reviews. The buyers were satisfied with the result. The owners claim that this design has a high level of reliability and is excellent for regions with moderate climatic conditions. There are pegs at the ends of the greenhouse arcs, which are easy to fix in the ground, after which the greenhouse is able to withstand even strong winds. So that the covering material does not fly away anywhere, there are plastic clips on the structure. According to gardeners, the design is resistant to deformation. During the entire service life, it does not change shape.

Image
Image
Image
Image
Image
Image

Buyers note that polyethylene film of different thicknesses is used as a covering material, which affects the characteristics

  • The lowest density - 30g / m2, designed for a temperature of at least -2 degrees, resistant to ultraviolet rays.
  • The average is 50 g / m2. The owners say that this greenhouse can be used even in autumn and warm winter (at temperatures down to -5 degrees).
  • High density - 60 g / m2. It can be safely used even in winter, it will protect crops from severe frosts.

Reviews of the "Snowdrop" model depend on what covering material is used, it can be spandbond or film. The first allows moisture to pass through and provides plants with oxygen. The material creates a shade, so that the leaves are protected from burns. But the owners are unhappy with the fact that this material does not retain heat well and lasts only 3 years.

Image
Image
Image
Image
Image
Image

The film perfectly retains heat and an optimal level of humidity, creating a greenhouse effect. But this coating lasts no more than two years.

" Snowdrop" can be used to harden young seedlings, the structure will keep the heat inside without overheating the culture . Whether or not to purchase the Snowdrop greenhouse is up to everyone to decide for himself. But a huge number of positive reviews convince many summer residents to purchase this design, which they do not regret. For a small area, such a greenhouse will be the best choice. It is worth paying attention to the affordable cost of the structure. Its purchase is affordable for every summer resident who wishes. This model ideally combines reasonable price and high quality.

In this video you will find an overview and assembly of the Snowdrop greenhouse.

Recommended: