2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Sheet piling is considered to be an effective method of protecting an earthen wall from collapse. In the process of creating a pit, the dowels are immersed in the ground and a soil excavation is made. This type of fencing is quite common in areas with limited space and construction sites on loose soil. Quite often, in the fencing of pits, they use the Larsen sheet pile, which has many advantages over other options.
What is it and what is it for?
The Larsen tongue and groove looks like a kind of trough with rounded corner elements that can be easily connected into a single structure. Due to its simple design and ease of connection, the tongue works effectively and is widely popular . To facilitate the connection process, increase the tightness during the production of the structure, sealants with a silicone base are used.
This type of rolled metal is characterized by anti-corrosion resistance, so I use it to work in an aqueous environment . In addition, Larsen's tongue can be used repeatedly. A quality product can withstand 6 times of active use. Upon completion of construction, the fence can be easily dismantled.
The Larsen sheet pile is a hot rolled product. It is made from high carbon steel.
Among the features of the product, the following are distinguished:
- high strength;
- good resistance to oxidation processes;
- multiple use;
- ease of installation;
- the ability to use on soils of any type.
Applications
The main purpose of the Larsen sheet pile is to strengthen the slopes and prevent shedding, soil creeping. In addition, the design has found its application on construction sites, as an option for limiting flooding. The product is simply irreplaceable for the arrangement of the coastline, piers, embankments.
The Larsen sheet pile is also used to create the following systems:
- plumbing and sewerage at the plant;
- underground communications, as a fortification of a trench;
- dams, bridges;
- road and railways;
- residential buildings;
- oil refining enterprises;
- strengthening the coastline of natural and artificial reservoirs;
- anti-landslide structures.
Types and their characteristics
GOST for Larsen sheet piling indicates the division of these elements into varieties that differ in size, weight, service life. Taking into account the above points, the technical characteristics of the structures are determined. The most common types are considered.
According to the material of manufacture, the Larsen sheet pile is divided into metal, reinforced concrete, wood, plastic, PVC
By types of castle:
- Z-shaped;
- S-like;
- L-shaped;
- trough-shaped.
According to the production method, Larsen sheet piles are cold and hot-rolled, made of steel, with good corrosion resistance.
The assortment of this product is sold in a wide variety. Each type of device has its own resistance to loads, which is influenced by how much the sheet pile weighs, its length, shape and metal consumption.
L4
The Larsen L4 tongue and groove has the form of a trough-shaped product, which is connected by tongue-and-groove locks. The mounting width of the product is 0.4 m, the length is from 50 to 220 cm . Often the height of such a profile is 20, 45 cm, in the central part the wall thickness is 1, 45 cm, and from the sides - 0.95 cm. 1 m2 of this rolled metal has a weight of 185 kg. The product is characterized by a strength of 518 kN per 1 m of length.
L5
The L5 sheet pile is almost similar to the previous version, however, it has individual characteristics:
- assembly width 420 mm;
- length 240 cm;
- the thickness of the main wall is 2.1 cm, and the side wall is 1.1 cm;
- strength - 698 kN / m;
1m2 of such a device weighs 238 kg, while the height of the profile usually reaches 19.6 cm.
L5-UM
The Larsen sheet pile L5-UM has a carrying capacity of 906 kN / m, while the square meter of such a product weighs 113 kg. The working width of the device is 0.54 m, the length of the product can vary from 50 to 240 cm . The height of the L5-UM profile is 23.6 cm, and the width of its main shelf is 34.4 cm.
Other
Another type of Larsen sheet pile, which is used for the construction of the excavation, is L5D. The height of such a profile is 24 cm, the installation width is 0, 51 meters. Weighs 1 m2 of this type of Larsen sheet piling 105 kg.
Manufacturers
Larsen sheet piles are made in Russia and Ukraine, as well as abroad. An example of a domestic manufacturer producing quality goods of this category is Evraz.
Such brands of rolled metal are very popular.
ARCELOR . The manufacturer of Larsen sheet piles is located in Luxembourg. Its factories are located all over the world, including in Russia. The firm produces the following types of profile:
- AZ - Z-shaped products with large width and high load-bearing capacity;
- AS - flat sheet piling, which is often used to enclose cylindrical structures, where it is not possible to install anchor structures;
- U is the standard trough type of Larsen sheet piling.
HSP . This type of sheet piling is produced in Germany. The product is characterized by significant load-bearing capacity as well as good strength. Such devices have found their application during the installation of sewage systems, as well as paths that remove chemical and radioactive particles. The manufacturer sells about 40 models of this category of goods, each of which has different strength indicators.
VL is a sheet pile produced in the Czech Republic . It is characterized by thin profile walls. The rest of the quality characteristics are almost the same as the goods produced in Russia.
Installation steps
The speed of immersion of Larsen sheet piles is influenced by the length of the product, as well as the characteristics of the soil. Profile piles can be installed by pressing, driving and vibrating. The technology for installing the structure is carried out in accordance with the preliminary calculation and design position.
Structural hammering is used outside of urban buildings, since vibration can have a negative impact on residential buildings and nearby structures. Dowel piles are hammered with a copra. This unit has an impact mechanism in its design. Thanks to this, the penetration of the support steel is quick and cheap.
Others, Vibration immersion is considered an equally popular method of installing Larsen sheet piles . This method has found its application in the case when it is not possible to hammer the support wall fixtures. For example, on the coastline, on soft ground and water sources. In this case, the work is carried out using a vibratory driver.
Stages of the procedure:
- fastening the tongue with slings to the vibration mechanism;
- carry out the guidance of the rack in accordance with the design position.
After that, the piles are subjected to great pressure using vibrations, which contribute to the immersion of the products in the soil. During the vibration immersion method, the soils are not subjected to strong pressure.
If we compare this method of installing the tongue and groove with the previous one, then its difference is the high cost.
The most expensive way to sink Larsen's structure into the ground is considered to be indentation. This option is not permitted for use in urban areas. The procedure is carried out using a special unit - a crawler piling installation . The grooves are vertically fixed to the movable mechanism, after which they are immersed in the ground to a certain depth.
Dismantling features
Over time, the supporting walls of the pit may become unusable. In this case, it will be necessary to remove the sheet pile from the soil. Dismantling of Larsen's device is carried out using a vibration device . When using a crane, the procedure will be ineffective, since the soil is characterized by a high friction force, the weakening of which is possible only if short vibration amplitudes are used.
For dismantling, the dowels must be fixed in a vibration unit, which is suspended from the crane . After that, the generator is connected, increasing the pulling force.
The Larsen sheet pile is currently widely used, as it is considered one of the most stable, safe and reliable options for strengthening the excavation. The high cost of products is paid off by the high quality of the structures, as well as the possibility of their reusable use.
Recommended:
Foam Sheet: Dimensions Of Sheet Packaging And Other Foam, Weight, Thin Sheets Of 50 Mm And 100 Mm, Other Options. GOST. Characteristics
What are the advantages and disadvantages of a foam sheet? What are the dimensions of the packaging sheet and other foam? What is the weight of the foam sheets? For what work are 50 mm and 100 mm thin sheets suitable? What is the use of Styrofoam? How should you work with it correctly? How to fix it?
Sidewalk Curbs (31 Photos): Dimensions And Do-it-yourself Installation Technology, Weight, Width And Length According To GOST, How Much They Cost
Everything about sidewalk curbs: varieties, sizes, marking. What should be the weight, width and length of the border according to GOST? Selection criteria and do-it-yourself installation technology
Nuts (70 Photos): Weight According To GOST And Types. What It Is? How To Tighten The Nuts? How Do They Differ From Washers And What Do They Look Like? Round Nuts And Others
Nuts - what are they? What is their weight according to GOST and what types of these parts are there? How to tighten the nuts, how do they differ from washers and what do they look like? How to unscrew such fasteners? What materials are these products made of? What are the characteristics of round nuts and others?
Dipping The Sheet Pile: Vibrators On The Excavator And Crane, Other Methods Of Immersion, Selection Of Steel Sheet Pile Immersing Machines Into The Ground
The immersion of the sheet pile is a demanded and technological process in fencing equipment. Excavator and crane vibrators are allowed in construction work, but other methods of immersion are also possible. The choice of method depends on several circumstances
Larsen Tongue Piles: L5 And L5-UM, L4. What It Is? Weight, Dimensions And Other Technical Characteristics, Sheet Piling Calculation And Immersion Technology
What are Larsen tongue piles L5 and L5-UM? Weight, dimensions and other specifications of these parts