Grafting Knife: Characteristics Of The Tina Brand Models. How Do Knives From Solingen, Victorinox And Raco Differ From Each Other?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

If you have not been able to vaccinate your fruit and berry plants, it is most likely due to the use of a bad knife. According to experts, the effectiveness of this operation is 85% dependent on the quality of the cutting blade, regardless of whether you are working with an apple, pear, rose or any other plant.

Peculiarities

It should be noted that grafting knives do not differ in a special variety of designs.

There are 3 types of such devices

• Rounding knife - it is characterized by a curved blade and high-quality double-sided sharpening. It is used for inoculation with the kidney or eye. Such a technique in agricultural technology is called "budding", therefore the name of the tool is appropriate.
• Copulating knife made of high-carbon hardened steel, has one straight cutting blade, sharpened on one side. Optimal for grafting by cuttings.
• Utility knife - a fairly popular tool that can have a wide variety of blade shapes, but in any case, there is a so-called horn for budding on it. The device is equipped with a "bone" made of plastic or metal - this part is located on the handle and helps to push the tree bark at the cut.

All types of knives are made of alloy steel and allow you to get a perfect cut, which is considered the main condition for joining the soft tissues of the tree and high survival rate.

How to choose?

No specialized knowledge is required to select a knife. It is important to remember only one thing - this tool must give a very even cut, which means that the blade must fully meet all the requirements of sharp effective sharpening.

In addition, you should pay attention to some other nuances:

• there should be no notches and notches on the edge of the blade;
• the cutting surface must be well polished to a mirror-like reflective effect;
• handles should be ergonomic and physiological, it should be convenient and comfortable to work with such a tool;
• a high-quality blade should not be more than 2 mm, it is optimal to use knives with the appropriate parameter of 1.5 mm, but if you take thicker cutters, they will injure the tissue of the tree, which leads to wilting of the branches.

The sharpening of the blade must be checked in the store. To do this, take a regular A4 sheet of paper and, holding it in your hands, make cuts. They should be even, and if, after 10-15 cuts, the edges begin to look torn, refuse to purchase such a tool.

According to user reviews, garden grafting knives of the brands Graft Pro, Solingen, Victorinox meet all of these requirements. The ranking also includes Ageev's grafting knife, brands Raco, Due Buoi, Tina, Felco and Fiskars. The cost of such knives is quite high, but the products are truly perfect, they can make up to 2000 vaccinations without any problems.

Application

Vaccinations are carried out in two ways:

• budding - when 2 buds are grafted by insertion into the split on the rootstock;
• copulation - in this case, the rootstock and scion are joined along the cut, and it is important that the cuttings and plants have the same cut diameter.

The knife is very easy to use . Let's take a look at a simple example. Let's say you plan to graft an apricot to a plum using copulation. To do this, you need to graft an apricot branch of the same thickness to a young plum shoot, the roots of the plum will begin to feed it too.

To begin with, cut the plum shoot so that about 15-20 cm remains from the ground, the apricot branch is cut and a segment of the same size is selected. The cuts should be strictly horizontal without deepening and creases.

On the apricot branch, using a grafting knife, make two oblique cuts on both sides so that their length is about 5 cm, it is better to leave small shoulders on top equal to the thickness of the bark.

On the plum branch, splits are made in the same way, so you form a place for grafting . After that, you should connect the scion to the stock so that they adhere tightly to each other, while not damaging the bark. The tighter the grip, the faster the apricot will take root.

The junction is wrapped with vinyl or fabric tape, holding the adhesion with the right hand, and after 1, 5-2 weeks, the results are checked - if the buds began to swell on the apricot branch, then the vaccination was successful.

It is advisable to make all sections in one motion, only then it will be possible to achieve perfect smoothness, which is why the grafting knife should be of the highest quality and sharpest possible.

The knife must be disinfected before each use. If you do not have alcohol on hand, then you can use potassium permanganate or a solution of copper sulfate, in extreme cases - just hold the blade in the flame for a few seconds.

The knife is a source of injury, therefore it is imperative to work in a comfortable position, in no case directing the knife with the edge towards you.

It is strictly not allowed to use a familiar tool for other purposes .- they should not cut everything that comes to hand, otherwise you will very quickly have to buy a new one. It is important to keep it clean and dry, after each use it should be cleaned with a cloth and, if necessary, wiped with machine oil.

In autumn, when the tools are packed for the winter, the grafting knife must be treated with grease and stored in a heated room with a low level of humidity.

Sharpening

Even the best grafting knife will sooner or later become dull and require correction. In fact, preparation must be carried out before each operation - after all, your task is to ensure that the sharpening profile is not just sharp, but very sharp. The cutting blade should not only "cut" the paper, but also shave off the hairs on the body.

In order to achieve the required sharpness, a coarse and fine grain should be used, as well as sandpaper . For "finishing" you need GOI polishing paste and a leather strap. Everything you need can be purchased at any hardware store, moreover, at "penny" prices.

Keep in mind that sharpening takes quite a long time. First you need to take the knife in your hands so that the blade is directed away from you, you need to place a container with water next to it. The bar is also laid nearby, with a large-textured surface up.

The blade must be moistened and placed on the block at an angle of 15-25 degrees . With smooth movements under slight pressure, the cutting blade should be moved along the bar, thus it is necessary to make about 20-30 movements. Then the bar should be turned over, repeating all the manipulations on the side with the fine fraction.

After this step, there are usually many jagged edges on the blade that need to be smoothed out completely.

Lapping is done on emery, first polished on a coarse, and then on the smallest fraction. When performing these actions, you should also maintain an angle of inclination of 15-25 degrees.

From time to time, you should check the sharpness of the sharpening on paper, if the blade easily cuts the suspended sheet, then all defects have been eliminated and you can proceed to the finishing part. To do this, they take a belt, lubricate it with polishing paste, fix it to the supports, pull and repeat the same manipulations so that the blade becomes perfectly sharp.

Keep in mind that pastes may vary in number, it is better to start with N4 and finish with a fine polish under N1.

This process is long and laborious, however, if done correctly, as a result, you will be able to complete the perfect grafting and enjoy a new bountiful harvest.